OMAPDSS: Add new DVI Connector driver

Add DVI Connector driver which uses the new DSS device model and DSS
ops.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drivers/video/omap2/displays-new/Kconfig

@@ -12,4 +12,10 @@ config DISPLAY_ENCODER_TPD12S015
 	  Driver for TPD12S015, which offers HDMI ESD protection and level
 	  shifting.
 
+config DISPLAY_CONNECTOR_DVI
+        tristate "DVI Connector"
+	depends on I2C
+	help
+	  Driver for a generic DVI connector.
+
 endmenu

drivers/video/omap2/displays-new/Makefile

 obj-$(CONFIG_DISPLAY_ENCODER_TFP410) += encoder-tfp410.o
 obj-$(CONFIG_DISPLAY_ENCODER_TPD12S015) += encoder-tpd12s015.o
+obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o

drivers/video/omap2/displays-new/connector-dvi.c

+/*
+ * Generic DVI Connector driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <drm/drm_edid.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+static const struct omap_video_timings dvic_default_timings = {
+	.x_res		= 640,
+	.y_res		= 480,
+
+	.pixel_clock	= 23500,
+
+	.hfp		= 48,
+	.hsw		= 32,
+	.hbp		= 80,
+
+	.vfp		= 3,
+	.vsw		= 4,
+	.vbp		= 7,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
+};
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct omap_video_timings timings;
+
+	struct i2c_adapter *i2c_adapter;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int dvic_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dvi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void dvic_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dvi->disconnect(in, dssdev);
+}
+
+static int dvic_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.dvi->set_timings(in, &ddata->timings);
+
+	r = in->ops.dvi->enable(in);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void dvic_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	in->ops.dvi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void dvic_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dvi->set_timings(in, timings);
+}
+
+static void dvic_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int dvic_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dvi->check_timings(in, timings);
+}
+
+static int dvic_ddc_read(struct i2c_adapter *adapter,
+		unsigned char *buf, u16 count, u8 offset)
+{
+	int r, retries;
+
+	for (retries = 3; retries > 0; retries--) {
+		struct i2c_msg msgs[] = {
+			{
+				.addr   = DDC_ADDR,
+				.flags  = 0,
+				.len    = 1,
+				.buf    = &offset,
+			}, {
+				.addr   = DDC_ADDR,
+				.flags  = I2C_M_RD,
+				.len    = count,
+				.buf    = buf,
+			}
+		};
+
+		r = i2c_transfer(adapter, msgs, 2);
+		if (r == 2)
+			return 0;
+
+		if (r != -EAGAIN)
+			break;
+	}
+
+	return r < 0 ? r : -EIO;
+}
+
+static int dvic_read_edid(struct omap_dss_device *dssdev,
+		u8 *edid, int len)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	int r, l, bytes_read;
+
+	if (!ddata->i2c_adapter)
+		return -ENODEV;
+
+	l = min(EDID_LENGTH, len);
+	r = dvic_ddc_read(ddata->i2c_adapter, edid, l, 0);
+	if (r)
+		return r;
+
+	bytes_read = l;
+
+	/* if there are extensions, read second block */
+	if (len > EDID_LENGTH && edid[0x7e] > 0) {
+		l = min(EDID_LENGTH, len - EDID_LENGTH);
+
+		r = dvic_ddc_read(ddata->i2c_adapter, edid + EDID_LENGTH,
+				l, EDID_LENGTH);
+		if (r)
+			return r;
+
+		bytes_read += l;
+	}
+
+	return bytes_read;
+}
+
+static bool dvic_detect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	unsigned char out;
+	int r;
+
+	if (!ddata->i2c_adapter)
+		return true;
+
+	r = dvic_ddc_read(ddata->i2c_adapter, &out, 1, 0);
+
+	return r == 0;
+}
+
+static struct omap_dss_driver dvic_driver = {
+	.connect	= dvic_connect,
+	.disconnect	= dvic_disconnect,
+
+	.enable		= dvic_enable,
+	.disable	= dvic_disable,
+
+	.set_timings	= dvic_set_timings,
+	.get_timings	= dvic_get_timings,
+	.check_timings	= dvic_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+
+	.read_edid	= dvic_read_edid,
+	.detect		= dvic_detect,
+};
+
+static int dvic_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct connector_dvi_platform_data *pdata;
+	struct omap_dss_device *in, *dssdev;
+	int i2c_bus_num;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	i2c_bus_num = pdata->i2c_bus_num;
+
+	if (i2c_bus_num != -1) {
+		struct i2c_adapter *adapter;
+
+		adapter = i2c_get_adapter(i2c_bus_num);
+		if (!adapter) {
+			dev_err(&pdev->dev,
+					"Failed to get I2C adapter, bus %d\n",
+					i2c_bus_num);
+			return -EPROBE_DEFER;
+		}
+
+		ddata->i2c_adapter = adapter;
+	}
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -ENODEV;
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int dvic_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = dvic_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->timings = dvic_default_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->driver = &dvic_driver;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_DVI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = dvic_default_timings;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit dvic_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(&ddata->dssdev);
+
+	dvic_disable(dssdev);
+	dvic_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	if (ddata->i2c_adapter)
+		i2c_put_adapter(ddata->i2c_adapter);
+
+	return 0;
+}
+
+static struct platform_driver dvi_connector_driver = {
+	.probe	= dvic_probe,
+	.remove	= __exit_p(dvic_remove),
+	.driver	= {
+		.name	= "connector-dvi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(dvi_connector_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Generic DVI Connector driver");
+MODULE_LICENSE("GPL");

include/video/omap-panel-data.h

@@ -176,4 +176,16 @@ struct encoder_tpd12s015_platform_data {
 	int hpd_gpio;
 };
 
+/**
+ * connector_dvi platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @i2c_bus_num: i2c bus number to be used for reading EDID
+ */
+struct connector_dvi_platform_data {
+	const char *name;
+	const char *source;
+	int i2c_bus_num;
+};
+
 #endif /* __OMAP_PANEL_DATA_H */