arm64: tegra: Add ID EEPROM for Jetson TX1 Developer Kit

There is an ID EEPROM on the Jetson TX1 carrier board, part of the
Jetson TX1 Developer Kit, that exposes information that can be used to
identify the carrier board. Add the device tree node so that operating
systems can access this EEPROM.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts

@@ -79,6 +79,19 @@ rom_13h {
 		};
 	};
 
+	i2c@7000c500 {
+		/* carrier board ID EEPROM */
+		eeprom@57 {
+			compatible = "atmel,24c02";
+			reg = <0x57>;
+
+			address-bits = <8>;
+			page-size = <8>;
+			size = <256>;
+			read-only;
+		};
+	};
+
 	clock@70110000 {
 		status = "okay";