Commit 34a65bec authored by Kenneth Feng's avatar Kenneth Feng Committed by Alex Deucher

drm/amd/pm: update driver if header for smu_13_0_7

update driver if header for smu_13_0_7
Signed-off-by: default avatarKenneth Feng <kenneth.feng@amd.com>
Acked-by: default avatarHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 25e75164
......@@ -25,10 +25,10 @@
// *** IMPORTANT ***
// PMFW TEAM: Always increment the interface version on any change to this file
#define SMU13_DRIVER_IF_VERSION 0x2A
#define SMU13_DRIVER_IF_VERSION 0x2C
//Increment this version if SkuTable_t or BoardTable_t change
#define PPTABLE_VERSION 0x1E
#define PPTABLE_VERSION 0x20
#define NUM_GFXCLK_DPM_LEVELS 16
#define NUM_SOCCLK_DPM_LEVELS 8
......@@ -152,6 +152,7 @@ typedef enum {
#define DEBUG_OVERRIDE_DISABLE_DFLL 0x00000200
#define DEBUG_OVERRIDE_ENABLE_RLC_VF_BRINGUP_MODE 0x00000400
#define DEBUG_OVERRIDE_DFLL_MASTER_MODE 0x00000800
#define DEBUG_OVERRIDE_ENABLE_PROFILING_MODE 0x00001000
// VR Mapping Bit Defines
#define VR_MAPPING_VR_SELECT_MASK 0x01
......@@ -1014,8 +1015,8 @@ typedef struct {
uint16_t Vmin_Hot_Eol[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) End-of-life Vset to be used at hot.
uint16_t Vmin_Cold_Eol[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) End-of-life Vset to be used at cold.
uint16_t Vmin_Aging_Offset[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Worst-case aging margin
uint16_t Vmin_Plat_Offset_Hot[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Hot
uint16_t Vmin_Plat_Offset_Cold[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Cold
uint16_t Spare_Vmin_Plat_Offset_Hot[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Hot
uint16_t Spare_Vmin_Plat_Offset_Cold[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Cold
//This is a fixed/minimum VMIN aging degradation offset which is applied at T0. This reflects the minimum amount of aging already accounted for.
uint16_t VcBtcFixedVminAgingOffset[PMFW_VOLT_PLANE_COUNT];
......@@ -1081,11 +1082,15 @@ typedef struct {
uint16_t GfxclkFreqGfxUlv; // in MHz
uint8_t GfxIdlePadding2[2];
uint32_t GfxoffSpare[16];
uint32_t GfxOffEntryHysteresis; //For RLC to count after it enters CGCG, and before triggers GFXOFF entry
uint32_t GfxoffSpare[15];
// GFX GPO
uint32_t GfxGpoSpare[16];
float DfllBtcMasterScalerM;
int32_t DfllBtcMasterScalerB;
float DfllBtcSlaveScalerM;
int32_t DfllBtcSlaveScalerB;
uint32_t GfxGpoSpare[12];
// GFX DCS
......@@ -1326,8 +1331,11 @@ typedef struct {
uint32_t PostVoltageSetBacoDelay; // in microseconds. Amount of time FW will wait after power good is established or PSI0 command is issued
uint32_t BacoEntryDelay; // in milliseconds. Amount of time FW will wait to trigger BACO entry after receiving entry notification from OS
uint8_t FuseWritePowerMuxPresent;
uint8_t FuseWritePadding[3];
// SECTION: Board Reserved
uint32_t BoardSpare[64];
uint32_t BoardSpare[63];
// SECTION: Structure Padding
......
......@@ -31,7 +31,7 @@
#define SMU13_DRIVER_IF_VERSION_SMU_V13_0_4 0x04
#define SMU13_DRIVER_IF_VERSION_SMU_V13_0_5 0x04
#define SMU13_DRIVER_IF_VERSION_SMU_V13_0_0 0x2A
#define SMU13_DRIVER_IF_VERSION_SMU_V13_0_7 0x2A
#define SMU13_DRIVER_IF_VERSION_SMU_V13_0_7 0x2C
#define SMU13_MODE1_RESET_WAIT_TIME_IN_MS 500 //500ms
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment