Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next

Jeff Kirsher says:

====================
This series contains updates to e100 and e1000e.

The e100 patch from Andy simply updates the netif_printk() to use
%*ph to dump small buffers.

The changes to e1000e include a fix from Dean Nelson to resolve a
issue where a pci_clear_master() was accidentally dropped during a
conflict resolution. Wei Young provides 2 patches, one removes an
assignment of the default ring size because it was a duplicate. The
second changes the packet split receive structure to use
PS_PAGE_BUFFERS macro for the length so that problems won't occur
when the length is changed.

The remaining patches for e1000e are from Bruce Allan, where he
provides a number of fixes and updates for I218.  In addition, a
fix for 82583 which can disappear off the PCIe bus, to resolve this,
disable ASPM L1.  Bruce also provides a fix to a previous commit
(commit e60b22c5 e1000e: fix accessing to suspended device) so that
devices are only taken out of runtime power management for those
ethtool operations that must access device registers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/e100.c

@@ -1175,15 +1175,12 @@ static int e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		config->rx_discard_short_frames = 0x0;  /* 1=discard, 0=save */
 	}
 
-	netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
-		     "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
-		     c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]);
-	netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
-		     "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
-		     c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]);
-	netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
-		     "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
-		     c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
+	netif_printk(nic, hw, KERN_DEBUG, nic->netdev, "[00-07]=%8ph\n",
+		     c + 0);
+	netif_printk(nic, hw, KERN_DEBUG, nic->netdev, "[08-15]=%8ph\n",
+		     c + 8);
+	netif_printk(nic, hw, KERN_DEBUG, nic->netdev, "[16-23]=%8ph\n",
+		     c + 16);
 	return 0;
 }
 

drivers/net/ethernet/intel/e1000e/82571.c

@@ -2057,6 +2057,7 @@ const struct e1000_info e1000_82583_info = {
 				  | FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
 	.flags2			= FLAG2_DISABLE_ASPM_L0S
+				  | FLAG2_DISABLE_ASPM_L1
 				  | FLAG2_NO_DISABLE_RX,
 	.pba			= 32,
 	.max_hw_frame_size	= DEFAULT_JUMBO,

drivers/net/ethernet/intel/e1000e/e1000.h

@@ -90,9 +90,6 @@ struct e1000_info;
 
 #define E1000_MNG_VLAN_NONE		(-1)
 
-/* Number of packet split data buffers (not including the header buffer) */
-#define PS_PAGE_BUFFERS			(MAX_PS_BUFFERS - 1)
-
 #define DEFAULT_JUMBO			9234
 
 /* Time to wait before putting the device into D3 if there's no link (in ms). */

drivers/net/ethernet/intel/e1000e/ethtool.c

@@ -173,7 +173,7 @@ static int e1000_get_settings(struct net_device *netdev,
 			speed = adapter->link_speed;
 			ecmd->duplex = adapter->link_duplex - 1;
 		}
-	} else {
+	} else if (!pm_runtime_suspended(netdev->dev.parent)) {
 		u32 status = er32(STATUS);
 		if (status & E1000_STATUS_LU) {
 			if (status & E1000_STATUS_SPEED_1000)
@@ -264,6 +264,9 @@ static int e1000_set_settings(struct net_device *netdev,
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	int ret_val = 0;
+
+	pm_runtime_get_sync(netdev->dev.parent);
 
 	/* When SoL/IDER sessions are active, autoneg/speed/duplex
 	 * cannot be changed
@@ -271,7 +274,8 @@ static int e1000_set_settings(struct net_device *netdev,
 	if (hw->phy.ops.check_reset_block &&
 	    hw->phy.ops.check_reset_block(hw)) {
 		e_err("Cannot change link characteristics when SoL/IDER is active.\n");
-		return -EINVAL;
+		ret_val = -EINVAL;
+		goto out;
 	}
 
 	/* MDI setting is only allowed when autoneg enabled because
@@ -279,13 +283,16 @@ static int e1000_set_settings(struct net_device *netdev,
 	 * duplex is forced.
 	 */
 	if (ecmd->eth_tp_mdix_ctrl) {
-		if (hw->phy.media_type != e1000_media_type_copper)
-			return -EOPNOTSUPP;
+		if (hw->phy.media_type != e1000_media_type_copper) {
+			ret_val = -EOPNOTSUPP;
+			goto out;
+		}
 
 		if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
 		    (ecmd->autoneg != AUTONEG_ENABLE)) {
 			e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
-			return -EINVAL;
+			ret_val = -EINVAL;
+			goto out;
 		}
 	}
 
@@ -307,8 +314,8 @@ static int e1000_set_settings(struct net_device *netdev,
 		u32 speed = ethtool_cmd_speed(ecmd);
 		/* calling this overrides forced MDI setting */
 		if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
-			clear_bit(__E1000_RESETTING, &adapter->state);
-			return -EINVAL;
+			ret_val = -EINVAL;
+			goto out;
 		}
 	}
 
@@ -331,8 +338,10 @@ static int e1000_set_settings(struct net_device *netdev,
 		e1000e_reset(adapter);
 	}
 
+out:
+	pm_runtime_put_sync(netdev->dev.parent);
 	clear_bit(__E1000_RESETTING, &adapter->state);
-	return 0;
+	return ret_val;
 }
 
 static void e1000_get_pauseparam(struct net_device *netdev,
@@ -366,6 +375,8 @@ static int e1000_set_pauseparam(struct net_device *netdev,
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 		usleep_range(1000, 2000);
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	if (adapter->fc_autoneg == AUTONEG_ENABLE) {
 		hw->fc.requested_mode = e1000_fc_default;
 		if (netif_running(adapter->netdev)) {
@@ -398,6 +409,7 @@ static int e1000_set_pauseparam(struct net_device *netdev,
 	}
 
 out:
+	pm_runtime_put_sync(netdev->dev.parent);
 	clear_bit(__E1000_RESETTING, &adapter->state);
 	return retval;
 }
@@ -428,6 +440,8 @@ static void e1000_get_regs(struct net_device *netdev,
 	u32 *regs_buff = p;
 	u16 phy_data;
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	memset(p, 0, E1000_REGS_LEN * sizeof(u32));
 
 	regs->version = (1 << 24) | (adapter->pdev->revision << 16) |
@@ -472,6 +486,8 @@ static void e1000_get_regs(struct net_device *netdev,
 	e1e_rphy(hw, MII_STAT1000, &phy_data);
 	regs_buff[24] = (u32)phy_data;	/* phy local receiver status */
 	regs_buff[25] = regs_buff[24];	/* phy remote receiver status */
+
+	pm_runtime_put_sync(netdev->dev.parent);
 }
 
 static int e1000_get_eeprom_len(struct net_device *netdev)
@@ -504,6 +520,8 @@ static int e1000_get_eeprom(struct net_device *netdev,
 	if (!eeprom_buff)
 		return -ENOMEM;
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	if (hw->nvm.type == e1000_nvm_eeprom_spi) {
 		ret_val = e1000_read_nvm(hw, first_word,
 					 last_word - first_word + 1,
@@ -517,6 +535,8 @@ static int e1000_get_eeprom(struct net_device *netdev,
 		}
 	}
 
+	pm_runtime_put_sync(netdev->dev.parent);
+
 	if (ret_val) {
 		/* a read error occurred, throw away the result */
 		memset(eeprom_buff, 0xff, sizeof(u16) *
@@ -566,6 +586,8 @@ static int e1000_set_eeprom(struct net_device *netdev,
 
 	ptr = (void *)eeprom_buff;
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	if (eeprom->offset & 1) {
 		/* need read/modify/write of first changed EEPROM word */
 		/* only the second byte of the word is being modified */
@@ -606,6 +628,7 @@ static int e1000_set_eeprom(struct net_device *netdev,
 		ret_val = e1000e_update_nvm_checksum(hw);
 
 out:
+	pm_runtime_put_sync(netdev->dev.parent);
 	kfree(eeprom_buff);
 	return ret_val;
 }
@@ -701,6 +724,8 @@ static int e1000_set_ringparam(struct net_device *netdev,
 		}
 	}
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	e1000e_down(adapter);
 
 	/* We can't just free everything and then setup again, because the
@@ -739,6 +764,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
 		e1000e_free_tx_resources(temp_tx);
 err_setup:
 	e1000e_up(adapter);
+	pm_runtime_put_sync(netdev->dev.parent);
 free_temp:
 	vfree(temp_tx);
 	vfree(temp_rx);
@@ -1732,6 +1758,8 @@ static void e1000_diag_test(struct net_device *netdev,
 	u8 autoneg;
 	bool if_running = netif_running(netdev);
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	set_bit(__E1000_TESTING, &adapter->state);
 
 	if (!if_running) {
@@ -1817,6 +1845,8 @@ static void e1000_diag_test(struct net_device *netdev,
 	}
 
 	msleep_interruptible(4 * 1000);
+
+	pm_runtime_put_sync(netdev->dev.parent);
 }
 
 static void e1000_get_wol(struct net_device *netdev,
@@ -1891,6 +1921,8 @@ static int e1000_set_phys_id(struct net_device *netdev,
 
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
+		pm_runtime_get_sync(netdev->dev.parent);
+
 		if (!hw->mac.ops.blink_led)
 			return 2;	/* cycle on/off twice per second */
 
@@ -1902,6 +1934,7 @@ static int e1000_set_phys_id(struct net_device *netdev,
 			e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
 		hw->mac.ops.led_off(hw);
 		hw->mac.ops.cleanup_led(hw);
+		pm_runtime_put_sync(netdev->dev.parent);
 		break;
 
 	case ETHTOOL_ID_ON:
@@ -1912,6 +1945,7 @@ static int e1000_set_phys_id(struct net_device *netdev,
 		hw->mac.ops.led_off(hw);
 		break;
 	}
+
 	return 0;
 }
 
@@ -1950,11 +1984,15 @@ static int e1000_set_coalesce(struct net_device *netdev,
 		adapter->itr_setting = adapter->itr & ~3;
 	}
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	if (adapter->itr_setting != 0)
 		e1000e_write_itr(adapter, adapter->itr);
 	else
 		e1000e_write_itr(adapter, 0);
 
+	pm_runtime_put_sync(netdev->dev.parent);
+
 	return 0;
 }
 
@@ -1968,7 +2006,9 @@ static int e1000_nway_reset(struct net_device *netdev)
 	if (!adapter->hw.mac.autoneg)
 		return -EINVAL;
 
+	pm_runtime_get_sync(netdev->dev.parent);
 	e1000e_reinit_locked(adapter);
+	pm_runtime_put_sync(netdev->dev.parent);
 
 	return 0;
 }
@@ -1982,7 +2022,12 @@ static void e1000_get_ethtool_stats(struct net_device *netdev,
 	int i;
 	char *p = NULL;
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	e1000e_get_stats64(netdev, &net_stats);
+
+	pm_runtime_put_sync(netdev->dev.parent);
+
 	for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
 		switch (e1000_gstrings_stats[i].type) {
 		case NETDEV_STATS:
@@ -2033,7 +2078,11 @@ static int e1000_get_rxnfc(struct net_device *netdev,
 	case ETHTOOL_GRXFH: {
 		struct e1000_adapter *adapter = netdev_priv(netdev);
 		struct e1000_hw *hw = &adapter->hw;
-		u32 mrqc = er32(MRQC);
+		u32 mrqc;
+
+		pm_runtime_get_sync(netdev->dev.parent);
+		mrqc = er32(MRQC);
+		pm_runtime_put_sync(netdev->dev.parent);
 
 		if (!(mrqc & E1000_MRQC_RSS_FIELD_MASK))
 			return 0;
@@ -2096,9 +2145,13 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
 		return -EOPNOTSUPP;
 	}
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
+	if (ret_val) {
+		pm_runtime_put_sync(netdev->dev.parent);
 		return -EBUSY;
+	}
 
 	/* EEE Capability */
 	ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data);
@@ -2117,14 +2170,11 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
 
 	/* EEE PCS Status */
 	ret_val = e1000_read_emi_reg_locked(hw, pcs_stat_addr, &phy_data);
+	if (ret_val)
+		goto release;
 	if (hw->phy.type == e1000_phy_82579)
 		phy_data <<= 8;
 
-release:
-	hw->phy.ops.release(hw);
-	if (ret_val)
-		return -ENODATA;
-
 	/* Result of the EEE auto negotiation - there is no register that
 	 * has the status of the EEE negotiation so do a best-guess based
 	 * on whether Tx or Rx LPI indications have been received.
@@ -2136,7 +2186,14 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
 	edata->tx_lpi_enabled = true;
 	edata->tx_lpi_timer = er32(LPIC) >> E1000_LPIC_LPIET_SHIFT;
 
-	return 0;
+release:
+	hw->phy.ops.release(hw);
+	if (ret_val)
+		ret_val = -ENODATA;
+
+	pm_runtime_put_sync(netdev->dev.parent);
+
+	return ret_val;
 }
 
 static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
@@ -2169,12 +2226,16 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
 
 	hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled;
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	/* reset the link */
 	if (netif_running(netdev))
 		e1000e_reinit_locked(adapter);
 	else
 		e1000e_reset(adapter);
 
+	pm_runtime_put_sync(netdev->dev.parent);
+
 	return 0;
 }
 
@@ -2212,19 +2273,7 @@ static int e1000e_get_ts_info(struct net_device *netdev,
 	return 0;
 }
 
-static int e1000e_ethtool_begin(struct net_device *netdev)
-{
-	return pm_runtime_get_sync(netdev->dev.parent);
-}
-
-static void e1000e_ethtool_complete(struct net_device *netdev)
-{
-	pm_runtime_put_sync(netdev->dev.parent);
-}
-
 static const struct ethtool_ops e1000_ethtool_ops = {
-	.begin			= e1000e_ethtool_begin,
-	.complete		= e1000e_ethtool_complete,
 	.get_settings		= e1000_get_settings,
 	.set_settings		= e1000_set_settings,
 	.get_drvinfo		= e1000_get_drvinfo,

drivers/net/ethernet/intel/e1000e/hw.h

@@ -90,6 +90,10 @@ struct e1000_hw;
 #define E1000_DEV_ID_PCH_LPT_I217_V		0x153B
 #define E1000_DEV_ID_PCH_LPTLP_I218_LM		0x155A
 #define E1000_DEV_ID_PCH_LPTLP_I218_V		0x1559
+#define E1000_DEV_ID_PCH_I218_LM2		0x15A0
+#define E1000_DEV_ID_PCH_I218_V2		0x15A1
+#define E1000_DEV_ID_PCH_I218_LM3		0x15A2	/* Wildcat Point PCH */
+#define E1000_DEV_ID_PCH_I218_V3		0x15A3	/* Wildcat Point PCH */
 
 #define E1000_REVISION_4	4
 
@@ -227,6 +231,9 @@ union e1000_rx_desc_extended {
 };
 
 #define MAX_PS_BUFFERS 4
+
+/* Number of packet split data buffers (not including the header buffer) */
+#define PS_PAGE_BUFFERS			(MAX_PS_BUFFERS - 1)
 /* Receive Descriptor - Packet Split */
 union e1000_rx_desc_packet_split {
 	struct {
@@ -251,7 +258,8 @@ union e1000_rx_desc_packet_split {
 		} middle;
 		struct {
 			__le16 header_status;
-			__le16 length[3];	/* length of buffers 1-3 */
+			/* length of buffers 1-3 */
+			__le16 length[PS_PAGE_BUFFERS];
 		} upper;
 		__le64 reserved;
 	} wb; /* writeback */

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -185,6 +185,7 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
 	u32 phy_id = 0;
 	s32 ret_val;
 	u16 retry_count;
+	u32 mac_reg = 0;
 
 	for (retry_count = 0; retry_count < 2; retry_count++) {
 		ret_val = e1e_rphy_locked(hw, MII_PHYSID1, &phy_reg);
@@ -203,11 +204,11 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
 
 	if (hw->phy.id) {
 		if (hw->phy.id == phy_id)
-			return true;
+			goto out;
 	} else if (phy_id) {
 		hw->phy.id = phy_id;
 		hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK);
-		return true;
+		goto out;
 	}
 
 	/* In case the PHY needs to be in mdio slow mode,
@@ -219,7 +220,22 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
 		ret_val = e1000e_get_phy_id(hw);
 	hw->phy.ops.acquire(hw);
 
-	return !ret_val;
+	if (ret_val)
+		return false;
+out:
+	if (hw->mac.type == e1000_pch_lpt) {
+		/* Unforce SMBus mode in PHY */
+		e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg);
+		phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
+		e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg);
+
+		/* Unforce SMBus mode in MAC */
+		mac_reg = er32(CTRL_EXT);
+		mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+		ew32(CTRL_EXT, mac_reg);
+	}
+
+	return true;
 }
 
 /**
@@ -233,7 +249,6 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 {
 	u32 mac_reg, fwsm = er32(FWSM);
 	s32 ret_val;
-	u16 phy_reg;
 
 	/* Gate automatic PHY configuration by hardware on managed and
 	 * non-managed 82579 and newer adapters.
@@ -262,22 +277,16 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 		mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
 		ew32(CTRL_EXT, mac_reg);
 
+		/* Wait 50 milliseconds for MAC to finish any retries
+		 * that it might be trying to perform from previous
+		 * attempts to acknowledge any phy read requests.
+		 */
+		msleep(50);
+
 		/* fall-through */
 	case e1000_pch2lan:
-		if (e1000_phy_is_accessible_pchlan(hw)) {
-			if (hw->mac.type == e1000_pch_lpt) {
-				/* Unforce SMBus mode in PHY */
-				e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg);
-				phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
-				e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg);
-
-				/* Unforce SMBus mode in MAC */
-				mac_reg = er32(CTRL_EXT);
-				mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
-				ew32(CTRL_EXT, mac_reg);
-			}
+		if (e1000_phy_is_accessible_pchlan(hw))
 			break;
-		}
 
 		/* fall-through */
 	case e1000_pchlan:
@@ -287,6 +296,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 
 		if (hw->phy.ops.check_reset_block(hw)) {
 			e_dbg("Required LANPHYPC toggle blocked by ME\n");
+			ret_val = -E1000_ERR_PHY;
 			break;
 		}
 
@@ -298,15 +308,6 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 		mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
 		ew32(FEXTNVM3, mac_reg);
 
-		if (hw->mac.type == e1000_pch_lpt) {
-			/* Toggling LANPHYPC brings the PHY out of SMBus mode
-			 * So ensure that the MAC is also out of SMBus mode
-			 */
-			mac_reg = er32(CTRL_EXT);
-			mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
-			ew32(CTRL_EXT, mac_reg);
-		}
-
 		/* Toggle LANPHYPC Value bit */
 		mac_reg = er32(CTRL);
 		mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
@@ -325,6 +326,21 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 				usleep_range(5000, 10000);
 			} while (!(er32(CTRL_EXT) &
 				   E1000_CTRL_EXT_LPCD) && count--);
+			usleep_range(30000, 60000);
+			if (e1000_phy_is_accessible_pchlan(hw))
+				break;
+
+			/* Toggling LANPHYPC brings the PHY out of SMBus mode
+			 * so ensure that the MAC is also out of SMBus mode
+			 */
+			mac_reg = er32(CTRL_EXT);
+			mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+			ew32(CTRL_EXT, mac_reg);
+
+			if (e1000_phy_is_accessible_pchlan(hw))
+				break;
+
+			ret_val = -E1000_ERR_PHY;
 		}
 		break;
 	default:
@@ -332,13 +348,14 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 	}
 
 	hw->phy.ops.release(hw);
-
-	/* Reset the PHY before any access to it.  Doing so, ensures
-	 * that the PHY is in a known good state before we read/write
-	 * PHY registers.  The generic reset is sufficient here,
-	 * because we haven't determined the PHY type yet.
-	 */
-	ret_val = e1000e_phy_hw_reset_generic(hw);
+	if (!ret_val) {
+		/* Reset the PHY before any access to it.  Doing so, ensures
+		 * that the PHY is in a known good state before we read/write
+		 * PHY registers.  The generic reset is sufficient here,
+		 * because we haven't determined the PHY type yet.
+		 */
+		ret_val = e1000e_phy_hw_reset_generic(hw);
+	}
 
 out:
 	/* Ungate automatic PHY configuration on non-managed 82579 */
@@ -793,29 +810,31 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
  *  When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications
  *  preventing further DMA write requests.  Workaround the issue by disabling
  *  the de-assertion of the clock request when in 1Gpbs mode.
+ *  Also, set appropriate Tx re-transmission timeouts for 10 and 100Half link
+ *  speeds in order to avoid Tx hangs.
  **/
 static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link)
 {
 	u32 fextnvm6 = er32(FEXTNVM6);
+	u32 status = er32(STATUS);
 	s32 ret_val = 0;
+	u16 reg;
 
-	if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) {
-		u16 kmrn_reg;
-
+	if (link && (status & E1000_STATUS_SPEED_1000)) {
 		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			return ret_val;
 
 		ret_val =
 		    e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
-						&kmrn_reg);
+						&reg);
 		if (ret_val)
 			goto release;
 
 		ret_val =
 		    e1000e_write_kmrn_reg_locked(hw,
 						 E1000_KMRNCTRLSTA_K1_CONFIG,
-						 kmrn_reg &
+						 reg &
 						 ~E1000_KMRNCTRLSTA_K1_ENABLE);
 		if (ret_val)
 			goto release;
@@ -827,12 +846,45 @@ static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link)
 		ret_val =
 		    e1000e_write_kmrn_reg_locked(hw,
 						 E1000_KMRNCTRLSTA_K1_CONFIG,
-						 kmrn_reg);
+						 reg);
 release:
 		hw->phy.ops.release(hw);
 	} else {
 		/* clear FEXTNVM6 bit 8 on link down or 10/100 */
-		ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
+		fextnvm6 &= ~E1000_FEXTNVM6_REQ_PLL_CLK;
+
+		if (!link || ((status & E1000_STATUS_SPEED_100) &&
+			      (status & E1000_STATUS_FD)))
+			goto update_fextnvm6;
+
+		ret_val = e1e_rphy(hw, I217_INBAND_CTRL, &reg);
+		if (ret_val)
+			return ret_val;
+
+		/* Clear link status transmit timeout */
+		reg &= ~I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK;
+
+		if (status & E1000_STATUS_SPEED_100) {
+			/* Set inband Tx timeout to 5x10us for 100Half */
+			reg |= 5 << I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT;
+
+			/* Do not extend the K1 entry latency for 100Half */
+			fextnvm6 &= ~E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION;
+		} else {
+			/* Set inband Tx timeout to 50x10us for 10Full/Half */
+			reg |= 50 <<
+			    I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT;
+
+			/* Extend the K1 entry latency for 10 Mbps */
+			fextnvm6 |= E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION;
+		}
+
+		ret_val = e1e_wphy(hw, I217_INBAND_CTRL, reg);
+		if (ret_val)
+			return ret_val;
+
+update_fextnvm6:
+		ew32(FEXTNVM6, fextnvm6);
 	}
 
 	return ret_val;
@@ -993,7 +1045,9 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 
 	/* Work-around I218 hang issue */
 	if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
-	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM3) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V3)) {
 		ret_val = e1000_k1_workaround_lpt_lp(hw, link);
 		if (ret_val)
 			return ret_val;
@@ -4168,7 +4222,9 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
 		u16 phy_reg, device_id = hw->adapter->pdev->device;
 
 		if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
-		    (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+		    (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V) ||
+		    (device_id == E1000_DEV_ID_PCH_I218_LM3) ||
+		    (device_id == E1000_DEV_ID_PCH_I218_V3)) {
 			u32 fextnvm6 = er32(FEXTNVM6);
 
 			ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);

drivers/net/ethernet/intel/e1000e/ich8lan.h

@@ -93,6 +93,7 @@
 #define E1000_FEXTNVM4_BEACON_DURATION_16USEC	0x3
 
 #define E1000_FEXTNVM6_REQ_PLL_CLK	0x00000100
+#define E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION	0x00000200
 
 #define PCIE_ICH8_SNOOP_ALL	PCIE_NO_SNOOP_ALL
 
@@ -197,6 +198,11 @@
 
 #define SW_FLAG_TIMEOUT		1000	/* SW Semaphore flag timeout in ms */
 
+/* Inband Control */
+#define I217_INBAND_CTRL				PHY_REG(770, 18)
+#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK	0x3F00
+#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT	8
+
 /* PHY Low Power Idle Control */
 #define I82579_LPI_CTRL				PHY_REG(772, 20)
 #define I82579_LPI_CTRL_100_ENABLE		0x2000

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -2979,17 +2979,10 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 	u32 pages = 0;
 
 	/* Workaround Si errata on PCHx - configure jumbo frame flow */
-	if (hw->mac.type >= e1000_pch2lan) {
-		s32 ret_val;
-
-		if (adapter->netdev->mtu > ETH_DATA_LEN)
-			ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
-		else
-			ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
-
-		if (ret_val)
-			e_dbg("failed to enable jumbo frame workaround mode\n");
-	}
+	if ((hw->mac.type >= e1000_pch2lan) &&
+	    (adapter->netdev->mtu > ETH_DATA_LEN) &&
+	    e1000_lv_jumbo_workaround_ich8lan(hw, true))
+		e_dbg("failed to enable jumbo frame workaround mode\n");
 
 	/* Program MC offset vector base */
 	rctl = er32(RCTL);
@@ -3826,6 +3819,8 @@ void e1000e_reset(struct e1000_adapter *adapter)
 			break;
 		}
 
+		pba = 14;
+		ew32(PBA, pba);
 		fc->high_water = ((pba << 10) * 9 / 10) & E1000_FCRTH_RTH;
 		fc->low_water = ((pba << 10) * 8 / 10) & E1000_FCRTL_RTL;
 		break;
@@ -4034,6 +4029,12 @@ void e1000e_down(struct e1000_adapter *adapter)
 	adapter->link_speed = 0;
 	adapter->link_duplex = 0;
 
+	/* Disable Si errata workaround on PCHx for jumbo frame flow */
+	if ((hw->mac.type >= e1000_pch2lan) &&
+	    (adapter->netdev->mtu > ETH_DATA_LEN) &&
+	    e1000_lv_jumbo_workaround_ich8lan(hw, false))
+		e_dbg("failed to disable jumbo frame workaround mode\n");
+
 	if (!pci_channel_offline(adapter->pdev))
 		e1000e_reset(adapter);
 
@@ -4683,11 +4684,11 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_phy_regs *phy = &adapter->phy_regs;
 
-	if ((er32(STATUS) & E1000_STATUS_LU) &&
+	if (!pm_runtime_suspended((&adapter->pdev->dev)->parent) &&
+	    (er32(STATUS) & E1000_STATUS_LU) &&
 	    (adapter->hw.phy.media_type == e1000_media_type_copper)) {
 		int ret_val;
 
-		pm_runtime_get_sync(&adapter->pdev->dev);
 		ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
 		ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
 		ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);
@@ -4698,7 +4699,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 		ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
 		if (ret_val)
 			e_warn("Error reading PHY register\n");
-		pm_runtime_put_sync(&adapter->pdev->dev);
 	} else {
 		/* Do not read PHY registers if link is not up
 		 * Set values to typical power-on defaults
@@ -5995,6 +5995,8 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 	 */
 	e1000e_release_hw_control(adapter);
 
+	pci_clear_master(pdev);
+
 	/* The pci-e switch on some quad port adapters will report a
 	 * correctable error when the MAC transitions from D0 to D3.  To
 	 * prevent this we need to mask off the correctable errors on the
@@ -6723,10 +6725,6 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->hw.fc.current_mode = e1000_fc_default;
 	adapter->hw.phy.autoneg_advertised = 0x2f;
 
-	/* ring size defaults */
-	adapter->rx_ring->count = E1000_DEFAULT_RXD;
-	adapter->tx_ring->count = E1000_DEFAULT_TXD;
-
 	/* Initial Wake on LAN setting - If APM wake is enabled in
 	 * the EEPROM, enable the ACPI Magic Packet filter
 	 */
@@ -6976,6 +6974,10 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_V), board_pch_lpt },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_LM), board_pch_lpt },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_V), board_pch_lpt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM2), board_pch_lpt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V2), board_pch_lpt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM3), board_pch_lpt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V3), board_pch_lpt },
 
 	{ 0, 0, 0, 0, 0, 0, 0 }	/* terminate list */
 };