[MIPS] Support for the RM9000-based Basler eXcite smart camera platform.

Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -119,6 +119,32 @@ config MIPS_MIRAGE
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
+config BASLER_EXCITE
+	bool "Basler eXcite smart camera support"
+	select DMA_COHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select IRQ_CPU_RM7K
+	select IRQ_CPU_RM9K
+	select SERIAL_RM9000
+	select SYS_HAS_CPU_RM9000
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	help
+	  The eXcite is a smart camera platform manufactured by
+	  Basler Vision Technologies AG
+
+config BASLER_EXCITE_PROTOTYPE
+	bool "Support for pre-release units"
+	depends on BASLER_EXCITE
+	default n
+	help
+	  Pre-series (prototype) units are different from later ones in
+	  some ways. Select this option if you have one of these. Please
+	  note that a kernel built with this option selected will not be
+	  able to run on normal units.
+
 config MIPS_COBALT
 	bool "Cobalt Server"
 	select DMA_NONCOHERENT

arch/mips/Makefile

@@ -387,6 +387,13 @@ core-$(CONFIG_MOMENCO_OCELOT_3) 	+= arch/mips/momentum/ocelot_3/
 cflags-$(CONFIG_MOMENCO_OCELOT_3)	+= -Iinclude/asm-mips/mach-ocelot3
 load-$(CONFIG_MOMENCO_OCELOT_3) 	+= 0xffffffff80100000
 
+#
+# Basler eXcite
+#
+core-$(CONFIG_BASLER_EXCITE)	+= arch/mips/basler/excite/
+cflags-$(CONFIG_BASLER_EXCITE)	+= -Iinclude/asm-mips/mach-excite
+load-$(CONFIG_BASLER_EXCITE)	+= 0x80100000
+
 #
 # Momentum Jaguar ATX
 #

arch/mips/basler/excite/Makefile

+#
+# Makefile for Basler eXcite
+#
+
+obj-$(CONFIG_BASLER_EXCITE)	+= excite_irq.o excite_prom.o excite_setup.o \
+				   excite_device.o excite_procfs.o
+
+obj-$(CONFIG_KGDB)		+= excite_dbg_io.o
+obj-m				+= excite_iodev.o

arch/mips/basler/excite/excite_dbg_io.c

+/*
+ *  Copyright (C) 2004 by Basler Vision Technologies AG
+ *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/gdb-stub.h>
+#include <asm/rm9k-ocd.h>
+#include <excite.h>
+
+#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1
+#error Debug port used by serial driver
+#endif
+
+#define UART_CLK		25000000
+#define BASE_BAUD		(UART_CLK / 16)
+#define REGISTER_BASE_0		0x0208UL
+#define REGISTER_BASE_1		0x0238UL
+
+#define REGISTER_BASE_DBG	REGISTER_BASE_1
+
+#define CPRR	0x0004
+#define UACFG	0x0200
+#define UAINTS	0x0204
+#define UARBR	(REGISTER_BASE_DBG + 0x0000)
+#define UATHR	(REGISTER_BASE_DBG + 0x0004)
+#define UADLL	(REGISTER_BASE_DBG + 0x0008)
+#define UAIER	(REGISTER_BASE_DBG + 0x000c)
+#define UADLH	(REGISTER_BASE_DBG + 0x0010)
+#define UAIIR	(REGISTER_BASE_DBG + 0x0014)
+#define UAFCR	(REGISTER_BASE_DBG + 0x0018)
+#define UALCR	(REGISTER_BASE_DBG + 0x001c)
+#define UAMCR	(REGISTER_BASE_DBG + 0x0020)
+#define UALSR	(REGISTER_BASE_DBG + 0x0024)
+#define UAMSR	(REGISTER_BASE_DBG + 0x0028)
+#define UASCR	(REGISTER_BASE_DBG + 0x002c)
+
+#define	PARITY_NONE	0
+#define	PARITY_ODD	0x08
+#define	PARITY_EVEN	0x18
+#define	PARITY_MARK	0x28
+#define	PARITY_SPACE	0x38
+
+#define	DATA_5BIT	0x0
+#define	DATA_6BIT	0x1
+#define	DATA_7BIT	0x2
+#define	DATA_8BIT	0x3
+
+#define	STOP_1BIT	0x0
+#define	STOP_2BIT	0x4
+
+#define BAUD_DBG	57600
+#define	PARITY_DBG	PARITY_NONE
+#define	DATA_DBG	DATA_8BIT
+#define	STOP_DBG	STOP_1BIT
+
+/* Initialize the serial port for KGDB debugging */
+void __init excite_kgdb_init(void)
+{
+	const u32 divisor = BASE_BAUD / BAUD_DBG;
+
+	/* Take the UART out of reset */
+	titan_writel(0x00ff1cff, CPRR);
+	titan_writel(0x00000000, UACFG);
+	titan_writel(0x00000002, UACFG);
+
+	titan_writel(0x0, UALCR);
+	titan_writel(0x0, UAIER);
+
+	/* Disable FIFOs */
+	titan_writel(0x00, UAFCR);
+
+	titan_writel(0x80, UALCR);
+	titan_writel(divisor & 0xff, UADLL);
+	titan_writel((divisor & 0xff00) >> 8, UADLH);
+	titan_writel(0x0, UALCR);
+
+	titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR);
+
+	/* Enable receiver interrupt */
+	titan_readl(UARBR);
+	titan_writel(0x1, UAIER);
+}
+
+int getDebugChar(void)
+{
+	while (!(titan_readl(UALSR) & 0x1));
+	return titan_readl(UARBR);
+}
+
+int putDebugChar(int data)
+{
+	while (!(titan_readl(UALSR) & 0x20));
+	titan_writel(data, UATHR);
+	return 1;
+}
+
+/* KGDB interrupt handler */
+asmlinkage void excite_kgdb_inthdl(struct pt_regs *regs)
+{
+	if (unlikely(
+		((titan_readl(UAIIR) & 0x7) == 4)
+		&& ((titan_readl(UARBR) & 0xff) == 0x3)))
+			set_async_breakpoint(&regs->cp0_epc);
+}

arch/mips/basler/excite/excite_flashtest.c

+/*
+*  Copyright (C) 2005 by Basler Vision Technologies AG
+*  Author: Thies Moeller <thies.moeller@baslerweb.com>
+*
+*  This program is free software; you can redistribute it and/or modify
+*  it under the terms of the GNU General Public License as published by
+*  the Free Software Foundation; either version 2 of the License, or
+*  (at your option) any later version.
+*
+*  This program is distributed in the hope that it will be useful,
+*  but WITHOUT ANY WARRANTY; without even the implied warranty of
+*  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+*  GNU General Public License for more details.
+*
+*  You should have received a copy of the GNU General Public License
+*  along with this program; if not, write to the Free Software
+*  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+
+#include <excite.h>
+
+#include <asm/io.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <asm/rm9k-ocd.h> // for ocd_write
+#include <linux/workqueue.h> // for queue
+
+#include "excite_nandflash.h"
+#include "nandflash.h"
+
+#define PFX "excite flashtest: "
+typedef void __iomem *io_reg_t;
+
+#define io_readb(__a__)		__raw_readb((__a__))
+#define io_writeb(__v__, __a__)	__raw_writeb((__v__), (__a__))
+
+
+
+static inline const struct resource *excite_nandflash_get_resource(
+	struct platform_device *d, unsigned long flags, const char *basename)
+{
+	const char fmt[] = "%s_%u";
+	char buf[80];
+
+	if (unlikely(snprintf(buf, sizeof buf, fmt, basename, d->id) >= sizeof buf))
+		return NULL;
+
+	return platform_get_resource_byname(d, flags, buf);
+}
+
+static inline io_reg_t
+excite_nandflash_map_regs(struct platform_device *d, const char *basename)
+{
+	void *result = NULL;
+	const struct resource *const r =
+	    excite_nandflash_get_resource(d, IORESOURCE_MEM, basename);
+	if (r)
+	   result = ioremap_nocache(r->start, r->end + 1 - r->start);
+	return result;
+}
+
+/* controller and mtd information */
+
+struct excite_nandflash_drvdata {
+	struct mtd_info board_mtd;
+	struct nand_chip board_chip;
+	io_reg_t regs;
+};
+
+
+/* command and control functions */
+static void excite_nandflash_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct nand_chip *this = mtd->priv;
+	io_reg_t regs = container_of(mtd,struct excite_nandflash_drvdata,board_mtd)->regs;
+
+	switch (cmd) {
+	/* Select the command latch */
+	case NAND_CTL_SETCLE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_CMD;
+		break;
+	/* Deselect the command latch */
+	case NAND_CTL_CLRCLE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_DATA;
+		break;
+	/* Select the address latch */
+	case NAND_CTL_SETALE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_ADDR;
+		break;
+	/* Deselect the address latch */
+	case NAND_CTL_CLRALE: this->IO_ADDR_W = regs  + EXCITE_NANDFLASH_DATA;
+		break;
+	/* Select the chip  -- not used */
+	case NAND_CTL_SETNCE:
+		break;
+	/* Deselect the chip -- not used */
+	case NAND_CTL_CLRNCE:
+		break;
+	}
+
+	this->IO_ADDR_R = this->IO_ADDR_W;
+}
+
+/* excite_nandflash_devready()
+ *
+ * returns 0 if the nand is busy, 1 if it is ready
+ */
+static int excite_nandflash_devready(struct mtd_info *mtd)
+{
+	struct excite_nandflash_drvdata *drvdata =
+	    container_of(mtd, struct excite_nandflash_drvdata, board_mtd);
+
+	return io_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS);
+}
+
+/* device management functions */
+
+/* excite_nandflash_remove
+ *
+ * called by device layer to remove the driver
+ * the binding to the mtd and all allocated
+ * resources are released
+ */
+static int excite_nandflash_remove(struct device *dev)
+{
+	struct excite_nandflash_drvdata *this = dev_get_drvdata(dev);
+
+	pr_info(PFX "remove");
+
+	dev_set_drvdata(dev, NULL);
+
+	if (this == NULL) {
+		pr_debug(PFX "call remove without private data!!");
+		return 0;
+	}
+
+
+	/* free the common resources */
+	if (this->regs != NULL) {
+		iounmap(this->regs);
+		this->regs = NULL;
+	}
+
+	kfree(this);
+
+	return 0;
+}
+
+static int elapsed;
+
+void my_workqueue_handler(void *arg)
+{
+	elapsed = 1;
+}
+
+DECLARE_WORK(sigElapsed, my_workqueue_handler, 0);
+
+
+/* excite_nandflash_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code checks to see if
+ * it can allocate all necessary resources then calls the
+ * nand layer to look for devices
+*/
+static int excite_nandflash_probe(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	struct excite_nandflash_drvdata *drvdata;	    /* private driver data     */
+	struct nand_chip              *board_chip;  /* private flash chip data */
+	struct mtd_info               *board_mtd;   /* mtd info for this board */
+
+	int err      = 0;
+	int count    = 0;
+	struct timeval tv,endtv;
+	unsigned int dt;
+
+	pr_info(PFX "probe dev: (%p)\n", dev);
+
+	pr_info(PFX "adjust LB timing\n");
+	ocd_writel(0x00000330, LDP2);
+
+	drvdata = kmalloc(sizeof(*drvdata), GFP_KERNEL);
+	if (unlikely(!drvdata)) {
+		printk(KERN_ERR PFX "no memory for drvdata\n");
+		err = -ENOMEM;
+		goto mem_error;
+	}
+
+	/* Initialize structures */
+	memset(drvdata, 0, sizeof(*drvdata));
+
+	/* bind private data into driver */
+	dev_set_drvdata(dev, drvdata);
+
+	/* allocate and map the resource */
+	drvdata->regs =
+	    excite_nandflash_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS);
+
+	if (unlikely(!drvdata->regs)) {
+		printk(KERN_ERR PFX "cannot reserve register region\n");
+		err = -ENXIO;
+		goto io_error;
+	}
+
+	/* initialise our chip */
+	board_chip = &drvdata->board_chip;
+
+	board_chip->IO_ADDR_R = drvdata->regs + EXCITE_NANDFLASH_DATA;
+	board_chip->IO_ADDR_W = drvdata->regs + EXCITE_NANDFLASH_DATA;
+
+	board_chip->hwcontrol = excite_nandflash_hwcontrol;
+	board_chip->dev_ready = excite_nandflash_devready;
+
+	board_chip->chip_delay = 25;
+	#if 0
+	/* TODO: speedup the initial scan */
+	board_chip->options = NAND_USE_FLASH_BBT;
+	#endif
+	board_chip->eccmode = NAND_ECC_SOFT;
+
+	/* link chip to mtd */
+	board_mtd = &drvdata->board_mtd;
+	board_mtd->priv = board_chip;
+
+
+	pr_info(PFX "FlashTest\n");
+	elapsed = 0;
+/*	schedule_delayed_work(&sigElapsed, 1*HZ);
+	while (!elapsed) {
+		io_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS);
+		count++;
+	}
+	pr_info(PFX "reads in 1 sec --> %d\n",count);
+*/
+	do_gettimeofday(&tv);
+	for (count = 0 ; count < 1000000; count ++) {
+		io_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS);
+	}
+	do_gettimeofday(&endtv);
+	dt = (endtv.tv_sec - tv.tv_sec) * 1000000 + endtv.tv_usec  - tv.tv_usec;
+	pr_info(PFX "%8d us timeval\n",dt);
+	pr_info(PFX "EndFlashTest\n");
+
+/*      return with error to unload everything
+*/
+io_error:
+	iounmap(drvdata->regs);
+
+mem_error:
+	kfree(drvdata);
+
+	if (err == 0)
+		err = -EINVAL;
+	return err;
+}
+
+static struct device_driver excite_nandflash_driver = {
+	.name = "excite_nand",
+	.bus = &platform_bus_type,
+	.probe = excite_nandflash_probe,
+	.remove = excite_nandflash_remove,
+};
+
+static int __init excite_nandflash_init(void)
+{
+	pr_info(PFX "register Driver (Rev: $Revision:$)\n");
+	return driver_register(&excite_nandflash_driver);
+}
+
+static void __exit excite_nandflash_exit(void)
+{
+	driver_unregister(&excite_nandflash_driver);
+	pr_info(PFX "Driver unregistered");
+}
+
+module_init(excite_nandflash_init);
+module_exit(excite_nandflash_exit);
+
+MODULE_AUTHOR("Thies Moeller <thies.moeller@baslerweb.com>");
+MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver");
+MODULE_LICENSE("GPL");

arch/mips/basler/excite/excite_fpga.h

+#ifndef EXCITE_FPGA_H_INCLUDED
+#define EXCITE_FPGA_H_INCLUDED
+
+
+/**
+ * Adress alignment of the individual FPGA bytes.
+ * The address arrangement of the individual bytes of the FPGA is two
+ * byte aligned at the embedded MK2 platform.
+ */
+#ifdef EXCITE_CCI_FPGA_MK2
+typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2)));
+#else
+typedef unsigned char excite_cci_fpga_align_t;
+#endif
+
+
+/**
+ * Size of Dual Ported RAM.
+ */
+#define EXCITE_DPR_SIZE 263
+
+
+/**
+ * Size of Reserved Status Fields in Dual Ported RAM.
+ */
+#define EXCITE_DPR_STATUS_SIZE 7
+
+
+
+/**
+ * FPGA.
+ * Hardware register layout of the FPGA interface. The FPGA must accessed
+ * byte wise solely.
+ * @see EXCITE_CCI_DPR_MK2
+ */
+typedef struct excite_fpga {
+
+	/**
+	 * Dual Ported RAM.
+	 */
+	excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE];
+
+	/**
+	 * Status.
+	 */
+	excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE];
+
+#ifdef EXCITE_CCI_FPGA_MK2
+	/**
+	 * RM9000 Interrupt.
+	 * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite.
+	 */
+	excite_cci_fpga_align_t rm9k_int;
+#else
+	/**
+	 * MK2 Interrupt.
+	 * Write access initiates interrupt at the ARM processor of the MK2.
+	 */
+	excite_cci_fpga_align_t mk2_int;
+
+	excite_cci_fpga_align_t gap[0x1000-0x10f];
+
+	/**
+	 * IRQ Source/Acknowledge.
+	 */
+	excite_cci_fpga_align_t rm9k_irq_src;
+
+	/**
+	 * IRQ Mask.
+	 * Set bits enable the related interrupt.
+	 */
+	excite_cci_fpga_align_t rm9k_irq_mask;
+#endif
+
+
+} excite_fpga;
+
+
+
+#endif	/* ndef EXCITE_FPGA_H_INCLUDED */

arch/mips/basler/excite/excite_iodev.c

+/*
+ *  Copyright (C) 2005 by Basler Vision Technologies AG
+ *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/poll.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/miscdevice.h>
+
+#include "excite_iodev.h"
+
+
+
+static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int);
+static int __init iodev_probe(struct device *);
+static int __exit iodev_remove(struct device *);
+static int iodev_open(struct inode *, struct file *);
+static int iodev_release(struct inode *, struct file *);
+static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *);
+static unsigned int iodev_poll(struct file *, struct poll_table_struct *);
+static irqreturn_t iodev_irqhdl(int, void *, struct pt_regs *);
+
+
+
+static const char iodev_name[] = "iodev";
+static unsigned int iodev_irq;
+static DECLARE_WAIT_QUEUE_HEAD(wq);
+
+
+
+static struct file_operations fops =
+{
+	.owner		= THIS_MODULE,
+	.open		= iodev_open,
+	.release	= iodev_release,
+	.read		= iodev_read,
+	.poll		= iodev_poll
+};
+
+static struct miscdevice miscdev =
+{
+	.minor		= MISC_DYNAMIC_MINOR,
+	.name		= iodev_name,
+	.fops		= &fops
+};
+
+static struct device_driver iodev_driver =
+{
+	.name		= (char *) iodev_name,
+	.bus		= &platform_bus_type,
+	.owner		= THIS_MODULE,
+	.probe		= iodev_probe,
+	.remove		= __exit_p(iodev_remove)
+};
+
+
+
+static const struct resource *
+iodev_get_resource(struct platform_device *pdv, const char *name,
+		     unsigned int type)
+{
+	char buf[80];
+	if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf)
+		return NULL;
+	return platform_get_resource_byname(pdv, type, buf);
+}
+
+
+
+/* No hotplugging on the platform bus - use __init */
+static int __init iodev_probe(struct device *dev)
+{
+	struct platform_device * const pdv = to_platform_device(dev);
+	const struct resource * const ri =
+		iodev_get_resource(pdv, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ);
+
+	if (unlikely(!ri))
+		return -ENXIO;
+
+	iodev_irq = ri->start;
+	return misc_register(&miscdev);
+}
+
+
+
+static int __exit iodev_remove(struct device *dev)
+{
+	return misc_deregister(&miscdev);
+}
+
+
+
+static int iodev_open(struct inode *i, struct file *f)
+{
+	return request_irq(iodev_irq, iodev_irqhdl, SA_INTERRUPT,
+			   iodev_name, &miscdev);
+}
+
+
+
+static int iodev_release(struct inode *i, struct file *f)
+{
+	free_irq(iodev_irq, &miscdev);
+	return 0;
+}
+
+
+
+
+static ssize_t
+iodev_read(struct file *f, char __user *d, size_t s, loff_t *o)
+{
+	ssize_t ret;
+	DEFINE_WAIT(w);
+
+	prepare_to_wait(&wq, &w, TASK_INTERRUPTIBLE);
+	if (!signal_pending(current))
+		schedule();
+	ret = signal_pending(current) ? -ERESTARTSYS : 0;
+	finish_wait(&wq, &w);
+	return ret;
+}
+
+
+static unsigned int iodev_poll(struct file *f, struct poll_table_struct *p)
+{
+	poll_wait(f, &wq, p);
+	return POLLOUT | POLLWRNORM;
+}
+
+
+
+
+static irqreturn_t iodev_irqhdl(int irq, void *ctxt, struct pt_regs *regs)
+{
+	wake_up(&wq);
+	return IRQ_HANDLED;
+}
+
+
+
+static int __init iodev_init_module(void)
+{
+	return driver_register(&iodev_driver);
+}
+
+
+
+static void __exit iodev_cleanup_module(void)
+{
+	driver_unregister(&iodev_driver);
+}
+
+module_init(iodev_init_module);
+module_exit(iodev_cleanup_module);
+
+
+
+MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
+MODULE_DESCRIPTION("Basler eXcite i/o interrupt handler");
+MODULE_VERSION("0.0");
+MODULE_LICENSE("GPL");

arch/mips/basler/excite/excite_iodev.h

+#ifndef __EXCITE_IODEV_H__
+#define __EXCITE_IODEV_H__
+
+/* Device name */
+#define IODEV_NAME		"iodev"
+
+/* Resource names */
+#define IODEV_RESOURCE_IRQ	"excite_iodev_irq"
+
+#endif /* __EXCITE_IODEV_H__ */

arch/mips/basler/excite/excite_irq.c

+/*
+ *  Copyright (C) by Basler Vision Technologies AG
+ *  Author: Thomas Koeller <thomas.koeller@baslereb.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/rm9k-ocd.h>
+
+#include <excite.h>
+
+extern asmlinkage void excite_handle_int(void);
+
+/*
+ * Initialize the interrupt handler
+ */
+void __init arch_init_irq(void)
+{
+	mips_cpu_irq_init(0);
+	rm7k_cpu_irq_init(8);
+	rm9k_cpu_irq_init(12);
+
+#ifdef CONFIG_KGDB
+	excite_kgdb_init();
+#endif
+}
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	const u32
+		interrupts = read_c0_cause() >> 8,
+		mask = ((read_c0_status() >> 8) & 0x000000ff) |
+		       (read_c0_intcontrol() & 0x0000ff00),
+		pending = interrupts & mask;
+	u32 msgintflags, msgintmask, msgint;
+
+	/* process timer interrupt */
+	if (pending & (1 << TIMER_IRQ)) {
+		do_IRQ(TIMER_IRQ, regs);
+		return;
+	}
+
+	/* Process PCI interrupts */
+#if USB_IRQ < 10
+	msgintflags = ocd_readl(INTP0Status0 + (USB_MSGINT / 0x20 * 0x10));
+	msgintmask  = ocd_readl(INTP0Mask0 + (USB_MSGINT / 0x20 * 0x10));
+	msgint	    = msgintflags & msgintmask & (0x1 << (USB_MSGINT % 0x20));
+	if ((pending & (1 << USB_IRQ)) && msgint) {
+#else
+	if (pending & (1 << USB_IRQ)) {
+#endif
+		do_IRQ(USB_IRQ, regs);
+		return;
+	}
+
+	/* Process TITAN interrupts */
+	msgintflags = ocd_readl(INTP0Status0 + (TITAN_MSGINT / 0x20 * 0x10));
+	msgintmask  = ocd_readl(INTP0Mask0 + (TITAN_MSGINT / 0x20 * 0x10));
+	msgint	    = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
+	if ((pending & (1 << TITAN_IRQ)) && msgint) {
+		ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
+#if defined(CONFIG_KGDB)
+		excite_kgdb_inthdl(regs);
+#endif
+		do_IRQ(TITAN_IRQ, regs);
+		return;
+	}
+
+	/* Process FPGA line #0 interrupts */
+	msgintflags = ocd_readl(INTP0Status0 + (FPGA0_MSGINT / 0x20 * 0x10));
+	msgintmask  = ocd_readl(INTP0Mask0 + (FPGA0_MSGINT / 0x20 * 0x10));
+	msgint	    = msgintflags & msgintmask & (0x1 << (FPGA0_MSGINT % 0x20));
+	if ((pending & (1 << FPGA0_IRQ)) && msgint) {
+		do_IRQ(FPGA0_IRQ, regs);
+		return;
+	}
+
+	/* Process FPGA line #1 interrupts */
+	msgintflags = ocd_readl(INTP0Status0 + (FPGA1_MSGINT / 0x20 * 0x10));
+	msgintmask  = ocd_readl(INTP0Mask0 + (FPGA1_MSGINT / 0x20 * 0x10));
+	msgint	    = msgintflags & msgintmask & (0x1 << (FPGA1_MSGINT % 0x20));
+	if ((pending & (1 << FPGA1_IRQ)) && msgint) {
+		do_IRQ(FPGA1_IRQ, regs);
+		return;
+	}
+
+	/* Process PHY interrupts */
+	msgintflags = ocd_readl(INTP0Status0 + (PHY_MSGINT / 0x20 * 0x10));
+	msgintmask  = ocd_readl(INTP0Mask0 + (PHY_MSGINT / 0x20 * 0x10));
+	msgint	    = msgintflags & msgintmask & (0x1 << (PHY_MSGINT % 0x20));
+	if ((pending & (1 << PHY_IRQ)) && msgint) {
+		do_IRQ(PHY_IRQ, regs);
+		return;
+	}
+
+	/* Process spurious interrupts */
+	spurious_interrupt(regs);
+}

arch/mips/basler/excite/excite_procfs.c

+/*
+ *  Copyright (C) 2004, 2005 by Basler Vision Technologies AG
+ *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ *  Procfs support for Basler eXcite
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/rm9k-ocd.h>
+
+#include <excite.h>
+
+static int excite_get_unit_id(char *buf, char **addr, off_t offs, int size)
+{
+	const int len = snprintf(buf, PAGE_SIZE, "%06x", unit_id);
+	const int w = len - offs;
+	*addr = buf + offs;
+	return w < size ? w : size;
+}
+
+static int
+excite_bootrom_read(char *page, char **start, off_t off, int count,
+		  int *eof, void *data)
+{
+	void __iomem * src;
+
+	if (off >= EXCITE_SIZE_BOOTROM) {
+		*eof = 1;
+		return 0;
+	}
+
+	if ((off + count) > EXCITE_SIZE_BOOTROM)
+		count = EXCITE_SIZE_BOOTROM - off;
+
+	src = ioremap(EXCITE_PHYS_BOOTROM + off, count);
+	if (src) {
+		memcpy_fromio(page, src, count);
+		iounmap(src);
+		*start = page;
+	} else {
+		count = -ENOMEM;
+	}
+
+	return count;
+}
+
+void excite_procfs_init(void)
+{
+	/* Create & populate /proc/excite */
+	struct proc_dir_entry * const pdir = proc_mkdir("excite", &proc_root);
+	if (pdir) {
+		struct proc_dir_entry * e;
+
+		e = create_proc_info_entry("unit_id", S_IRUGO, pdir,
+					   excite_get_unit_id);
+		if (e) e->size = 6;
+
+		e = create_proc_read_entry("bootrom", S_IRUGO, pdir,
+					   excite_bootrom_read, NULL);
+		if (e) e->size = EXCITE_SIZE_BOOTROM;
+	}
+}

arch/mips/basler/excite/excite_prom.c

+/*
+ *  Copyright (C) 2004, 2005 by Thomas Koeller (thomas.koeller@baslerweb.com)
+ *  Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
+ *  Manish Lachwani.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+#include <asm/bootinfo.h>
+#include <asm/string.h>
+
+#include <excite.h>
+
+/* This struct is used by Redboot to pass arguments to the kernel */
+typedef struct
+{
+	char *name;
+	char *val;
+} t_env_var;
+
+struct parmblock {
+	t_env_var memsize;
+	t_env_var modetty0;
+	t_env_var ethaddr;
+	t_env_var env_end;
+	char *argv[2];
+	char text[0];
+};
+
+static unsigned int prom_argc;
+static const char ** prom_argv;
+static const t_env_var * prom_env;
+
+static void prom_halt(void) __attribute__((noreturn));
+static void prom_exit(void) __attribute__((noreturn));
+
+
+
+const char *get_system_type(void)
+{
+	return "Basler eXcite";
+}
+
+/*
+ * Halt the system
+ */
+static void prom_halt(void)
+{
+	printk(KERN_NOTICE "\n** System halted.\n");
+	while (1)
+		asm volatile (
+			"\t.set\tmips3\n"
+			"\twait\n"
+			"\t.set\tmips0\n"
+		);
+}
+
+/*
+ * Reset the CPU and re-enter Redboot
+ */
+static void prom_exit(void)
+{
+	unsigned int i;
+	volatile unsigned char * const flg =
+		(volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_DPR);
+
+	/* Clear the watchdog reset flag, set the reboot flag */
+	*flg &= ~0x01;
+	*flg |= 0x80;
+
+	for (i = 0; i < 10; i++) {
+		*(volatile unsigned char *)  (EXCITE_ADDR_FPGA + EXCITE_FPGA_SYSCTL) = 0x02;
+		iob();
+		mdelay(1000);
+	}
+
+	printk(KERN_NOTICE "Reset failed\n");
+	prom_halt();
+}
+
+static const char __init *prom_getenv(char *name)
+{
+	const t_env_var * p;
+	for (p = prom_env; p->name != NULL; p++)
+		if(strcmp(name, p->name) == 0)
+			break;
+	return p->val;
+}
+
+/*
+ * Init routine which accepts the variables from Redboot
+ */
+void __init prom_init(void)
+{
+	const struct parmblock * const pb = (struct parmblock *) fw_arg2;
+
+	prom_argc = fw_arg0;
+	prom_argv = (const char **) fw_arg1;
+	prom_env = &pb->memsize;
+
+	/* Callbacks for halt, restart */
+	_machine_restart = (void (*)(char *)) prom_exit;
+	_machine_halt = prom_halt;
+
+#ifdef CONFIG_32BIT
+	/* copy command line */
+	strcpy(arcs_cmdline, prom_argv[1]);
+	memsize = simple_strtol(prom_getenv("memsize"), NULL, 16);
+	strcpy(modetty, prom_getenv("modetty0"));
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+#	error 64 bit support not implemented
+#endif /* CONFIG_64BIT */
+
+	mips_machgroup = MACH_GROUP_TITAN;
+	mips_machtype = MACH_TITAN_EXCITE;
+}
+
+/* This is called from free_initmem(), so we need to provide it */
+void __init prom_free_prom_memory(void)
+{
+	/* Nothing to do */
+}

arch/mips/basler/excite/excite_setup.c

+/*
+ *  Copyright (C) 2004, 2005 by Basler Vision Technologies AG
+ *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *  Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
+ *  Manish Lachwani.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/pgtable-32.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/rm9k-ocd.h>
+
+#include <excite.h>
+
+#define TITAN_UART_CLK	25000000
+
+#if 1
+/* normal serial port assignment */
+#define REGBASE_SER0	0x0208
+#define REGBASE_SER1	0x0238
+#define MASK_SER0	0x1
+#define MASK_SER1	0x2
+#else
+/* serial ports swapped */
+#define REGBASE_SER0	0x0238
+#define REGBASE_SER1	0x0208
+#define MASK_SER0	0x2
+#define MASK_SER1	0x1
+#endif
+
+unsigned long memsize;
+char modetty[30];
+unsigned int titan_irq = TITAN_IRQ;
+static void __iomem * ctl_regs;
+u32 unit_id;
+
+volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD);
+volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN);
+
+/* Protect access to shared GPI registers */
+spinlock_t titan_lock = SPIN_LOCK_UNLOCKED;
+int titan_irqflags;
+
+
+static void excite_timer_init(void)
+{
+	const u32 modebit5 = ocd_readl(0x00e4);
+	unsigned int
+		mult = ((modebit5 >> 11) & 0x1f) + 2,
+		div = ((modebit5 >> 16) & 0x1f) + 2;
+
+	if (div == 33) div = 1;
+	mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2;
+}
+
+static void excite_timer_setup(struct irqaction *irq)
+{
+	/* The eXcite platform uses the alternate timer interrupt */
+	set_c0_intcontrol(0x80);
+	setup_irq(TIMER_IRQ, irq);
+}
+
+static int __init excite_init_console(void)
+{
+#if defined(CONFIG_SERIAL_8250)
+	static __initdata char serr[] =
+		KERN_ERR "Serial port #%u setup failed\n";
+	struct uart_port up;
+
+	/* Take the DUART out of reset */
+	titan_writel(0x00ff1cff, CPRR);
+
+#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1)
+	/* Enable both ports */
+	titan_writel(MASK_SER0 | MASK_SER1, UACFG);
+#else
+	/* Enable port #0 only */
+	titan_writel(MASK_SER0, UACFG);
+#endif	/* defined(CONFIG_KGDB) */
+
+ 	/*
+	 * Set up serial port #0. Do not use autodetection; the result is
+	 * not what we want.
+ 	 */
+	memset(&up, 0, sizeof(up));
+	up.membase	= (char *) titan_addr(REGBASE_SER0);
+	up.irq		= TITAN_IRQ;
+	up.uartclk	= TITAN_UART_CLK;
+	up.regshift	= 0;
+	up.iotype	= UPIO_MEM32;
+	up.type		= PORT_RM9000;
+	up.flags	= UPF_SHARE_IRQ;
+	up.line		= 0;
+	if (early_serial_setup(&up))
+		printk(serr, up.line);
+
+#if CONFIG_SERIAL_8250_NR_UARTS > 1
+	/* And now for port #1. */
+	up.membase	= (char *) titan_addr(REGBASE_SER1);
+	up.line		= 1;
+ 	if (early_serial_setup(&up))
+		printk(serr, up.line);
+#endif /* CONFIG_SERIAL_8250_NR_UARTS > 1 */
+#else
+	/* Leave the DUART in reset */
+	titan_writel(0x00ff3cff, CPRR);
+#endif  /* defined(CONFIG_SERIAL_8250) */
+
+	return 0;
+}
+
+static int __init excite_platform_init(void)
+{
+	unsigned int i;
+	unsigned char buf[3];
+	u8 reg;
+	void __iomem * dpr;
+
+	/* BIU buffer allocations */
+	ocd_writel(8, CPURSLMT);	/* CPU */
+	titan_writel(4, CPGRWL);	/* GPI / Ethernet */
+
+	/* Map control registers located in FPGA */
+	ctl_regs = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_SYSCTL, 16);
+	if (!ctl_regs)
+		panic("eXcite: failed to map platform control registers\n");
+	memcpy_fromio(buf, ctl_regs + 2, ARRAY_SIZE(buf));
+	unit_id = buf[0] | (buf[1] << 8) | (buf[2] << 16);
+
+	/* Clear the reboot flag */
+	dpr = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_DPR, 1);
+	reg = __raw_readb(dpr);
+	__raw_writeb(reg & 0x7f, dpr);
+	iounmap(dpr);
+
+	/* Interrupt controller setup */
+	for (i = INTP0Status0; i < INTP0Status0 + 0x80; i += 0x10) {
+		ocd_writel(0x00000000, i + 0x04);
+		ocd_writel(0xffffffff, i + 0x0c);
+	}
+	ocd_writel(0x2, NMICONFIG);
+
+	ocd_writel(0x1 << (TITAN_MSGINT % 0x20),
+		   INTP0Mask0 + (0x10 * (TITAN_MSGINT / 0x20)));
+	ocd_writel((0x1 << (FPGA0_MSGINT % 0x20))
+		   | ocd_readl(INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))),
+		   INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20)));
+	ocd_writel((0x1 << (FPGA1_MSGINT % 0x20))
+		   | ocd_readl(INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))),
+		   INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20)));
+	ocd_writel((0x1 << (PHY_MSGINT % 0x20))
+		   | ocd_readl(INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))),
+		   INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20)));
+#if USB_IRQ < 10
+	ocd_writel((0x1 << (USB_MSGINT % 0x20))
+		   | ocd_readl(INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))),
+		   INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20)));
+#endif
+	/* Enable the packet FIFO, XDMA and XDMA arbiter */
+	titan_writel(0x00ff18ff, CPRR);
+
+	/*
+	 * Set up the PADMUX. Power down all ethernet slices,
+	 * they will be powered up and configured at device startup.
+	 */
+	titan_writel(0x00878206, CPTC1R);
+	titan_writel(0x00001100, CPTC0R); /* latch PADMUX, enable WCIMODE */
+
+	/* Reset and enable the FIFO block */
+	titan_writel(0x00000001, SDRXFCIE);
+	titan_writel(0x00000001, SDTXFCIE);
+	titan_writel(0x00000100, SDRXFCIE);
+	titan_writel(0x00000000, SDTXFCIE);
+
+	/*
+	 * Initialize the common interrupt shared by all components of
+	 * the GPI/Ethernet subsystem.
+	 */
+	titan_writel((EXCITE_PHYS_OCD >> 12), CPCFG0);
+	titan_writel(TITAN_MSGINT, CPCFG1);
+
+	/*
+	 * XDMA configuration.
+	 * In order for the XDMA to be sharable among multiple drivers,
+	 * the setup must be done here in the platform. The reason is that
+	 * this setup can only be done while the XDMA is in reset. If this
+	 * were done in a driver, it would interrupt all other drivers
+	 * using the XDMA.
+	 */
+	titan_writel(0x80021dff, GXCFG);	/* XDMA reset */
+	titan_writel(0x00000000, CPXCISRA);
+	titan_writel(0x00000000, CPXCISRB);	/* clear pending interrupts */
+#if defined (CONFIG_HIGHMEM)
+#	error change for HIGHMEM support!
+#else
+	titan_writel(0x00000000, GXDMADRPFX);	/* buffer address prefix */
+#endif
+	titan_writel(0, GXDMA_DESCADR);
+
+	for (i = 0x5040; i <= 0x5300; i += 0x0040)
+		titan_writel(0x80080000, i);	/* reset channel */
+
+	titan_writel((0x1 << 29)			/* no sparse tx descr. */
+		     | (0x1 << 28)			/* no sparse rx descr. */
+		     | (0x1 << 23) | (0x1 << 24)	/* descriptor coherency */
+		     | (0x1 << 21) | (0x1 << 22)	/* data coherency */
+		     | (0x1 << 17)
+		     | 0x1dff,
+		     GXCFG);
+
+#if defined(CONFIG_SMP)
+#	error No SMP support
+#else
+	/* All interrupts go to core #0 only. */
+	titan_writel(0x1f007fff, CPDST0A);
+	titan_writel(0x00000000, CPDST0B);
+	titan_writel(0x0000ff3f, CPDST1A);
+	titan_writel(0x00000000, CPDST1B);
+	titan_writel(0x00ffffff, CPXDSTA);
+	titan_writel(0x00000000, CPXDSTB);
+#endif
+
+	/* Enable DUART interrupts, disable everything else. */
+	titan_writel(0x04000000, CPGIG0ER);
+	titan_writel(0x000000c0, CPGIG1ER);
+
+	excite_procfs_init();
+	return 0;
+}
+
+void __init plat_setup(void)
+{
+	volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000;
+
+	/* Announce RAM to system */
+	add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
+
+	/* Set up timer initialization hooks */
+	board_time_init = excite_timer_init;
+	board_timer_setup = excite_timer_setup;
+
+	/* Set up the peripheral address map */
+	*(boot_ocd_base + (LKB9 / sizeof (u32))) = 0;
+	*(boot_ocd_base + (LKB10 / sizeof (u32))) = 0;
+	*(boot_ocd_base + (LKB11 / sizeof (u32))) = 0;
+	*(boot_ocd_base + (LKB12 / sizeof (u32))) = 0;
+	wmb();
+	*(boot_ocd_base + (LKB0 / sizeof (u32))) = EXCITE_PHYS_OCD >> 4;
+	wmb();
+
+	ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5);
+	ocd_writel(((EXCITE_SIZE_TITAN >> 4) & 0x7fffff00) - 0x100, LKM5);
+	ocd_writel((EXCITE_PHYS_SCRAM >> 4) | 0x1UL, LKB13);
+	ocd_writel(((EXCITE_SIZE_SCRAM >> 4) & 0xffffff00) - 0x100, LKM13);
+
+	/* Local bus slot #0 */
+	ocd_writel(0x00040510, LDP0);
+	ocd_writel((EXCITE_PHYS_BOOTROM >> 4) | 0x1UL, LKB9);
+	ocd_writel(((EXCITE_SIZE_BOOTROM >> 4) & 0x03ffff00) - 0x100, LKM9);
+
+	/* Local bus slot #2 */
+	ocd_writel(0x00000330, LDP2);
+	ocd_writel((EXCITE_PHYS_FPGA >> 4) | 0x1, LKB11);
+	ocd_writel(((EXCITE_SIZE_FPGA >> 4) - 0x100) & 0x03ffff00, LKM11);
+
+	/* Local bus slot #3 */
+	ocd_writel(0x00123413, LDP3);
+	ocd_writel((EXCITE_PHYS_NAND >> 4) | 0x1, LKB12);
+	ocd_writel(((EXCITE_SIZE_NAND >> 4) - 0x100) & 0x03ffff00, LKM12);
+}
+
+
+
+console_initcall(excite_init_console);
+arch_initcall(excite_platform_init);
+
+EXPORT_SYMBOL(titan_lock);
+EXPORT_SYMBOL(titan_irqflags);
+EXPORT_SYMBOL(titan_irq);
+EXPORT_SYMBOL(ocd_base);
+EXPORT_SYMBOL(titan_base);

arch/mips/pci/Makefile

@@ -23,6 +23,7 @@ obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
 #
 # These are still pretty much in the old state, watch, go blind.
 #
+obj-$(CONFIG_BASLER_EXCITE)	= ops-titan.o pci-excite.o fixup-excite.o
 obj-$(CONFIG_DDB5477)		+= fixup-ddb5477.o pci-ddb5477.o ops-ddb5477.o
 obj-$(CONFIG_LASAT)		+= pci-lasat.o
 obj-$(CONFIG_MIPS_ATLAS)	+= fixup-atlas.o

arch/mips/pci/fixup-excite.c

+/*
+ *  Copyright (C) 2004 by Basler Vision Technologies AG
+ *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <excite.h>
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (pin == 0)
+		return -1;
+
+	return USB_IRQ;		/* USB controller is the only PCI device */
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}

arch/mips/pci/ops-titan.c

@@ -26,8 +26,19 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 
-#include <asm/titan_dep.h>
+#include <asm/pci.h>
+#include <asm/io.h>
+#include <asm/rm9k-ocd.h>
 
+/*
+ * PCI specific defines
+ */
+#define	TITAN_PCI_0_CONFIG_ADDRESS	0x780
+#define	TITAN_PCI_0_CONFIG_DATA		0x784
+
+/*
+ * Titan PCI Config Read Byte
+ */
 static int titan_read_config(struct pci_bus *bus, unsigned int devfn, int reg,
 	int size, u32 * val)
 {
@@ -43,8 +54,8 @@ static int titan_read_config(struct pci_bus *bus, unsigned int devfn, int reg,
 
 
 	/* start the configuration cycle */
-	TITAN_WRITE(TITAN_PCI_0_CONFIG_ADDRESS, address);
-	tmp = TITAN_READ(TITAN_PCI_0_CONFIG_DATA) >> ((reg & 3) << 3);
+	ocd_writel(address, TITAN_PCI_0_CONFIG_ADDRESS);
+	tmp = ocd_readl(TITAN_PCI_0_CONFIG_DATA) >> ((reg & 3) << 3);
 
 	switch (size) {
 	case 1:
@@ -71,20 +82,20 @@ static int titan_write_config(struct pci_bus *bus, unsigned int devfn, int reg,
 		(reg & 0xfc) | 0x80000000;
 
 	/* start the configuration cycle */
-	TITAN_WRITE(TITAN_PCI_0_CONFIG_ADDRESS, address);
+	ocd_writel(address, TITAN_PCI_0_CONFIG_ADDRESS);
 
 	/* write the data */
 	switch (size) {
 	case 1:
-		TITAN_WRITE_8(TITAN_PCI_0_CONFIG_DATA + (~reg & 0x3), val);
+		ocd_writeb(val, TITAN_PCI_0_CONFIG_DATA + (~reg & 0x3));
 		break;
 
 	case 2:
-		TITAN_WRITE_16(TITAN_PCI_0_CONFIG_DATA + (~reg & 0x2), val);
+		ocd_writew(val, TITAN_PCI_0_CONFIG_DATA + (~reg & 0x2));
 		break;
 
 	case 4:
-		TITAN_WRITE(TITAN_PCI_0_CONFIG_DATA, val);
+		ocd_writel(val, TITAN_PCI_0_CONFIG_DATA);
 		break;
 	}
 

arch/mips/pci/pci-excite.c

+/*
+ *  Copyright (C) 2004 by Basler Vision Technologies AG
+ *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *  Based on the PMC-Sierra Yosemite board support by Ralf Baechle.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/bitops.h>
+#include <asm/rm9k-ocd.h>
+#include <excite.h>
+
+
+extern struct pci_ops titan_pci_ops;
+
+
+static struct resource
+	mem_resource = 	{
+		.name	= "PCI memory",
+		.start	= EXCITE_PHYS_PCI_MEM,
+		.end	= EXCITE_PHYS_PCI_MEM + EXCITE_SIZE_PCI_MEM - 1,
+		.flags	= IORESOURCE_MEM
+	},
+	io_resource = {
+		.name	= "PCI I/O",
+		.start	= EXCITE_PHYS_PCI_IO,
+		.end	= EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1,
+		.flags	= IORESOURCE_IO
+	};
+
+
+static struct pci_controller bx_controller = {
+	.pci_ops	= &titan_pci_ops,
+	.mem_resource	= &mem_resource,
+	.mem_offset	= 0x00000000UL,
+	.io_resource	= &io_resource,
+	.io_offset	= 0x00000000UL
+};
+
+
+static char
+	iopage_failed[] __initdata   = "Cannot allocate PCI I/O page",
+	modebits_no_pci[] __initdata = "PCI is not configured in mode bits";
+
+#define RM9000x2_OCD_HTSC	0x0604
+#define RM9000x2_OCD_HTBHL	0x060c
+#define RM9000x2_OCD_PCIHRST	0x078c
+
+#define RM9K_OCD_MODEBIT1	0x00d4 /* (MODEBIT1) Mode Bit 1 */
+#define RM9K_OCD_CPHDCR		0x00f4 /* CPU-PCI/HT Data Control. */
+
+#define PCISC_FB2B 		0x00000200
+#define PCISC_MWICG		0x00000010
+#define PCISC_EMC		0x00000004
+#define PCISC_ERMA		0x00000002
+
+
+
+static int __init basler_excite_pci_setup(void)
+{
+	const unsigned int fullbars = memsize / (256 << 20);
+	unsigned int i;
+
+	/* Check modebits to see if PCI is really enabled. */
+	if (!((ocd_readl(RM9K_OCD_MODEBIT1) >> (47-32)) & 0x1))
+		panic(modebits_no_pci);
+
+	if (NULL == request_mem_region(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO,
+				       "Memory-mapped PCI I/O page"))
+		panic(iopage_failed);
+
+	/* Enable PCI 0 as master for config cycles */
+	ocd_writel(PCISC_EMC | PCISC_ERMA, RM9000x2_OCD_HTSC);
+
+
+	/* Set up latency timer */
+	ocd_writel(0x8008, RM9000x2_OCD_HTBHL);
+
+	/*  Setup host IO and Memory space */
+	ocd_writel((EXCITE_PHYS_PCI_IO >> 4) | 1, LKB7);
+	ocd_writel(((EXCITE_SIZE_PCI_IO >> 4) & 0x7fffff00) - 0x100, LKM7);
+	ocd_writel((EXCITE_PHYS_PCI_MEM >> 4) | 1, LKB8);
+	ocd_writel(((EXCITE_SIZE_PCI_MEM >> 4) & 0x7fffff00) - 0x100, LKM8);
+
+	/* Set up PCI BARs to map all installed memory */
+	for (i = 0; i < 6; i++) {
+		const unsigned int bar = 0x610 + i * 4;
+
+	     	if (i < fullbars) {
+			ocd_writel(0x10000000 * i, bar);
+			ocd_writel(0x01000000 * i, bar + 0x140);
+			ocd_writel(0x0ffff029, bar + 0x100);
+			continue;
+		}
+
+	     	if (i == fullbars) {
+			int o;
+			u32 mask;
+
+			const unsigned long rem = memsize - i * 0x10000000;
+			if (!rem) {
+				ocd_writel(0x00000000, bar + 0x100);
+				continue;
+			}
+
+			o = ffs(rem) - 1;
+			if (rem & ~(0x1 << o))
+				o++;
+			mask = ((0x1 << o) & 0x0ffff000) - 0x1000;
+			ocd_writel(0x10000000 * i, bar);
+			ocd_writel(0x01000000 * i, bar + 0x140);
+			ocd_writel(0x00000029 | mask, bar + 0x100);
+			continue;
+		}
+
+		ocd_writel(0x00000000, bar + 0x100);
+	}
+
+	/* Finally, enable the PCI interupt */
+#if USB_IRQ > 7
+	set_c0_intcontrol(1 << USB_IRQ);
+#else
+	set_c0_status(1 << (USB_IRQ + 8));
+#endif
+
+	ioport_resource.start = EXCITE_PHYS_PCI_IO;
+	ioport_resource.end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1;
+	set_io_port_base((unsigned long) ioremap_nocache(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO));
+	register_pci_controller(&bx_controller);
+	return 0;
+}
+
+
+arch_initcall(basler_excite_pci_setup);

include/asm-mips/bootinfo.h

@@ -217,6 +217,7 @@
  */
 #define MACH_GROUP_TITAN       22	/* PMC-Sierra Titan		*/
 #define  MACH_TITAN_YOSEMITE	1	/* PMC-Sierra Yosemite		*/
+#define  MACH_TITAN_EXCITE	2	/* Basler eXcite		*/
 
 /*
  * Valid machtype for group NEC EMMA2RH

include/asm-mips/mach-excite/cpu-feature-overrides.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com>
+ */
+#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Basler eXcite has an RM9122 processor.
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_icache_snoops_remote_store	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_subset_pcaches	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */

include/asm-mips/mach-excite/excite.h

+#ifndef __EXCITE_H__
+#define __EXCITE_H__
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+
+#define EXCITE_CPU_EXT_CLOCK 100000000
+
+#if !defined(__ASSEMBLER__)
+void __init excite_kgdb_init(void);
+void excite_procfs_init(void);
+extern unsigned long memsize;
+extern char modetty[];
+extern u32 unit_id;
+#endif
+
+/* Base name for XICAP devices */
+#define XICAP_NAME	"xicap_gpi"
+
+/* OCD register offsets */
+#define LKB0		0x0038
+#define LKB5		0x0128
+#define LKM5		0x012C
+#define LKB7		0x0138
+#define LKM7		0x013c
+#define LKB8		0x0140
+#define LKM8		0x0144
+#define LKB9		0x0148
+#define LKM9		0x014c
+#define LKB10		0x0150
+#define LKM10		0x0154
+#define LKB11		0x0158
+#define LKM11		0x015c
+#define LKB12		0x0160
+#define LKM12		0x0164
+#define LKB13		0x0168
+#define LKM13		0x016c
+#define LDP0		0x0200
+#define LDP1		0x0210
+#define LDP2		0x0220
+#define LDP3		0x0230
+#define INTPIN0		0x0A40
+#define INTPIN1		0x0A44
+#define INTPIN2		0x0A48
+#define INTPIN3		0x0A4C
+#define INTPIN4		0x0A50
+#define INTPIN5		0x0A54
+#define INTPIN6		0x0A58
+#define INTPIN7		0x0A5C
+
+
+
+
+/* TITAN register offsets */
+#define CPRR		0x0004
+#define CPDSR		0x0008
+#define CPTC0R		0x000c
+#define CPTC1R		0x0010
+#define CPCFG0		0x0020
+#define CPCFG1		0x0024
+#define CPDST0A		0x0028
+#define CPDST0B		0x002c
+#define CPDST1A		0x0030
+#define CPDST1B		0x0034
+#define CPXDSTA		0x0038
+#define CPXDSTB		0x003c
+#define CPXCISRA	0x0048
+#define CPXCISRB	0x004c
+#define CPGIG0ER	0x0050
+#define CPGIG1ER	0x0054
+#define CPGRWL		0x0068
+#define CPURSLMT	0x00f8
+#define UACFG		0x0200
+#define UAINTS		0x0204
+#define SDRXFCIE	0x4828
+#define SDTXFCIE	0x4928
+#define INTP0Status0	0x1B00
+#define INTP0Mask0	0x1B04
+#define INTP0Set0	0x1B08
+#define INTP0Clear0	0x1B0C
+#define GXCFG		0x5000
+#define GXDMADRPFX	0x5018
+#define GXDMA_DESCADR	0x501c
+#define GXCH0TDESSTRT	0x5054
+
+/* IRQ definitions */
+#define NMICONFIG		0xac0
+#define TITAN_MSGINT	0xc4
+#define TITAN_IRQ	((TITAN_MSGINT / 0x20) + 2)
+#define FPGA0_MSGINT	0x5a
+#define FPGA0_IRQ	((FPGA0_MSGINT / 0x20) + 2)
+#define FPGA1_MSGINT	0x7b
+#define FPGA1_IRQ	((FPGA1_MSGINT / 0x20) + 2)
+#define PHY_MSGINT	0x9c
+#define PHY_IRQ		((PHY_MSGINT   / 0x20) + 2)
+
+#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE)
+/* Pre-release units used interrupt pin #9 */
+#define USB_IRQ		11
+#else
+/* Re-designed units use interrupt pin #1 */
+#define USB_MSGINT	0x39
+#define USB_IRQ		((USB_MSGINT / 0x20) + 2)
+#endif
+#define TIMER_IRQ	12
+
+
+/* Device address ranges */
+#define EXCITE_OFFS_OCD		0x1fffc000
+#define	EXCITE_SIZE_OCD		(16 * 1024)
+#define EXCITE_PHYS_OCD		CPHYSADDR(EXCITE_OFFS_OCD)
+#define EXCITE_ADDR_OCD		CKSEG1ADDR(EXCITE_OFFS_OCD)
+
+#define EXCITE_OFFS_SCRAM 	0x1fffa000
+#define	EXCITE_SIZE_SCRAM	(8 << 10)
+#define EXCITE_PHYS_SCRAM 	CPHYSADDR(EXCITE_OFFS_SCRAM)
+#define EXCITE_ADDR_SCRAM 	CKSEG1ADDR(EXCITE_OFFS_SCRAM)
+
+#define EXCITE_OFFS_PCI_IO	0x1fff8000
+#define	EXCITE_SIZE_PCI_IO	(8 << 10)
+#define EXCITE_PHYS_PCI_IO	CPHYSADDR(EXCITE_OFFS_PCI_IO)
+#define EXCITE_ADDR_PCI_IO 	CKSEG1ADDR(EXCITE_OFFS_PCI_IO)
+
+#define EXCITE_OFFS_TITAN	0x1fff0000
+#define EXCITE_SIZE_TITAN	(32 << 10)
+#define EXCITE_PHYS_TITAN	CPHYSADDR(EXCITE_OFFS_TITAN)
+#define EXCITE_ADDR_TITAN	CKSEG1ADDR(EXCITE_OFFS_TITAN)
+
+#define EXCITE_OFFS_PCI_MEM	0x1ffe0000
+#define EXCITE_SIZE_PCI_MEM	(64 << 10)
+#define EXCITE_PHYS_PCI_MEM	CPHYSADDR(EXCITE_OFFS_PCI_MEM)
+#define EXCITE_ADDR_PCI_MEM	CKSEG1ADDR(EXCITE_OFFS_PCI_MEM)
+
+#define EXCITE_OFFS_FPGA	0x1ffdc000
+#define EXCITE_SIZE_FPGA	(16 << 10)
+#define EXCITE_PHYS_FPGA	CPHYSADDR(EXCITE_OFFS_FPGA)
+#define EXCITE_ADDR_FPGA	CKSEG1ADDR(EXCITE_OFFS_FPGA)
+
+#define EXCITE_OFFS_NAND	0x1ffd8000
+#define EXCITE_SIZE_NAND	(16 << 10)
+#define EXCITE_PHYS_NAND	CPHYSADDR(EXCITE_OFFS_NAND)
+#define EXCITE_ADDR_NAND	CKSEG1ADDR(EXCITE_OFFS_NAND)
+
+#define EXCITE_OFFS_BOOTROM	0x1f000000
+#define EXCITE_SIZE_BOOTROM	(8 << 20)
+#define EXCITE_PHYS_BOOTROM	CPHYSADDR(EXCITE_OFFS_BOOTROM)
+#define EXCITE_ADDR_BOOTROM	CKSEG1ADDR(EXCITE_OFFS_BOOTROM)
+
+/* FPGA address offsets */
+#define EXCITE_FPGA_DPR		0x0104	/* dual-ported ram */
+#define EXCITE_FPGA_SYSCTL	0x0200	/* system control register block */
+
+#endif /* __EXCITE_H__ */

include/asm-mips/mach-excite/excite_nandflash.h

+#ifndef __EXCITE_NANDFLASH_H__
+#define __EXCITE_NANDFLASH_H__
+
+/* Resource names */
+#define EXCITE_NANDFLASH_RESOURCE_REGS	"excite_nandflash_regs"
+
+#endif /* __EXCITE_NANDFLASH_H__ */

include/asm-mips/mach-excite/rm9k_eth.h

+#if !defined(__RM9K_ETH_H__)
+#define __RM9K_ETH_H__
+
+#define RM9K_GE_NAME			"rm9k_ge"
+
+/* Resource names */
+#define RM9K_GE_RESOURCE_MAC      	"rm9k_ge_mac"
+#define RM9K_GE_RESOURCE_MSTAT      	"rm9k_ge_mstat"
+#define RM9K_GE_RESOURCE_PKTPROC	"rm9k_ge_pktproc"
+#define RM9K_GE_RESOURCE_XDMA		"rm9k_ge_xdma"
+#define RM9K_GE_RESOURCE_FIFO_RX  	"rm9k_ge_fifo_rx"
+#define RM9K_GE_RESOURCE_FIFO_TX  	"rm9k_ge_fifo_tx"
+#define RM9K_GE_RESOURCE_FIFOMEM_RX  	"rm9k_ge_fifo_memory_rx"
+#define RM9K_GE_RESOURCE_FIFOMEM_TX  	"rm9k_ge_fifo_memory_tx"
+#define RM9K_GE_RESOURCE_PHY      	"rm9k_ge_phy"
+#define RM9K_GE_RESOURCE_DMADESC_RX  	"rm9k_ge_dmadesc_rx"
+#define RM9K_GE_RESOURCE_DMADESC_TX  	"rm9k_ge_dmadesc_tx"
+#define RM9K_GE_RESOURCE_IRQ_MAIN	"rm9k_ge_irq_main"
+#define RM9K_GE_RESOURCE_IRQ_PHY	"rm9k_ge_irq_phy"
+#define RM9K_GE_RESOURCE_GPI_SLICE	"rm9k_ge_gpi_slice"
+#define RM9K_GE_RESOURCE_MDIO_CHANNEL	"rm9k_ge_mdio_channel"
+
+#endif /* !defined(__RM9K_ETH_H__) */

include/asm-mips/mach-excite/rm9k_wdt.h

+#ifndef __RM9K_WDT_H__
+#define __RM9K_WDT_H__
+
+/* Device name */
+#define WDT_NAME		"wdt_gpi"
+
+/* Resource names */
+#define WDT_RESOURCE_REGS	"excite_watchdog_regs"
+#define WDT_RESOURCE_IRQ	"excite_watchdog_irq"
+#define WDT_RESOURCE_COUNTER	"excite_watchdog_counter"
+
+#endif /* __RM9K_WDT_H__ */

include/asm-mips/mach-excite/rm9k_xicap.h

+#ifndef __EXCITE_XICAP_H__
+#define __EXCITE_XICAP_H__
+
+
+/* Resource names */
+#define XICAP_RESOURCE_FIFO_RX		"xicap_fifo_rx"
+#define XICAP_RESOURCE_FIFO_TX		"xicap_fifo_tx"
+#define XICAP_RESOURCE_XDMA 		"xicap_xdma"
+#define XICAP_RESOURCE_DMADESC		"xicap_dmadesc"
+#define XICAP_RESOURCE_PKTPROC  	"xicap_pktproc"
+#define XICAP_RESOURCE_IRQ		"xicap_irq"
+#define XICAP_RESOURCE_GPI_SLICE	"xicap_gpi_slice"
+#define XICAP_RESOURCE_FIFO_BLK		"xicap_fifo_blocks"
+#define XICAP_RESOURCE_PKT_STREAM	"xicap_pkt_stream"
+
+#endif /* __EXCITE_XICAP_H__ */

include/asm-mips/rm9k-ocd.h

+/*
+ *  Copyright (C) 2004 by Basler Vision Technologies AG
+ *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(_ASM_RM9K_OCD_H)
+#define _ASM_RM9K_OCD_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+extern volatile void __iomem * const ocd_base;
+extern volatile void __iomem * const titan_base;
+
+#define ocd_addr(__x__)		(ocd_base + (__x__))
+#define titan_addr(__x__)	(titan_base + (__x__))
+#define scram_addr(__x__)	(scram_base + (__x__))
+
+/* OCD register access */
+#define ocd_readl(__offs__) __raw_readl(ocd_addr(__offs__))
+#define ocd_readw(__offs__) __raw_readw(ocd_addr(__offs__))
+#define ocd_readb(__offs__) __raw_readb(ocd_addr(__offs__))
+#define ocd_writel(__val__, __offs__) \
+	__raw_writel((__val__), ocd_addr(__offs__))
+#define ocd_writew(__val__, __offs__) \
+	__raw_writew((__val__), ocd_addr(__offs__))
+#define ocd_writeb(__val__, __offs__) \
+	__raw_writeb((__val__), ocd_addr(__offs__))
+
+/* TITAN register access - 32 bit-wide only */
+#define titan_readl(__offs__) __raw_readl(titan_addr(__offs__))
+#define titan_writel(__val__, __offs__) \
+	__raw_writel((__val__), titan_addr(__offs__))
+
+/* Protect access to shared TITAN registers */
+extern spinlock_t titan_lock;
+extern int titan_irqflags;
+#define lock_titan_regs() spin_lock_irqsave(&titan_lock, titan_irqflags)
+#define unlock_titan_regs() spin_unlock_irqrestore(&titan_lock, titan_irqflags)
+
+#endif	/* !defined(_ASM_RM9K_OCD_H) */

include/asm-mips/war.h

@@ -172,7 +172,8 @@
  * On the RM9000 there is a problem which makes the CreateDirtyExclusive
  * cache operation unusable on SMP systems.
  */
-#if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_PMC_YOSEMITE)
+#if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_PMC_YOSEMITE) || \
+    defined(CONFIG_BASLER_EXCITE)
 #define  RM9000_CDEX_SMP_WAR		1
 #endif
 
@@ -182,7 +183,7 @@
  * being fetched may case spurious exceptions.
  */
 #if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_MOMENCO_OCELOT_3) || \
-    defined(CONFIG_PMC_YOSEMITE)
+    defined(CONFIG_PMC_YOSEMITE) || defined(CONFIG_BASLER_EXCITE)
 #define ICACHE_REFILLS_WORKAROUND_WAR	1
 #endif