[PATCH] chelsio: add 1G swcixw aupport

Add support for 1G versions of Chelsio devices.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/net/Kconfig

@@ -2376,6 +2376,13 @@ config CHELSIO_T1
           To compile this driver as a module, choose M here: the module
           will be called cxgb.
 
+config CHELSIO_T1_1G
+        bool "Chelsio gigabit Ethernet support"
+        depends on CHELSIO_T1
+        help
+          Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
+          are using only 10G cards say 'N' here.
+
 config EHEA
 	tristate "eHEA Ethernet support"
 	depends on IBMEBUS

drivers/net/chelsio/Makefile

@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_CHELSIO_T1) += cxgb.o
 
+cxgb-$(CONFIG_CHELSIO_T1_1G) += ixf1010.o mac.o mv88e1xxx.o vsc7326.o vsc8244.o
 cxgb-objs := cxgb2.o espi.o tp.o pm3393.o sge.o subr.o \
 	     mv88x201x.o my3126.o $(cxgb-y)
 

drivers/net/chelsio/common.h

@@ -283,6 +283,8 @@ struct adapter {
 
 	spinlock_t tpi_lock;
 	spinlock_t work_lock;
+	spinlock_t mac_lock;
+
 	/* guards async operations */
 	spinlock_t async_lock ____cacheline_aligned;
 	u32 slow_intr_mask;

drivers/net/chelsio/cxgb2.c

@@ -1094,6 +1094,7 @@ static int __devinit init_one(struct pci_dev *pdev,
 			spin_lock_init(&adapter->tpi_lock);
 			spin_lock_init(&adapter->work_lock);
 			spin_lock_init(&adapter->async_lock);
+			spin_lock_init(&adapter->mac_lock);
 
 			INIT_WORK(&adapter->ext_intr_handler_task,
 				  ext_intr_task, adapter);

drivers/net/chelsio/mac.c

+/* $Date: 2005/10/22 00:42:59 $ $RCSfile: mac.c,v $ $Revision: 1.32 $ */
+#include "gmac.h"
+#include "regs.h"
+#include "fpga_defs.h"
+
+#define MAC_CSR_INTERFACE_GMII      0x0
+#define MAC_CSR_INTERFACE_TBI       0x1
+#define MAC_CSR_INTERFACE_MII       0x2
+#define MAC_CSR_INTERFACE_RMII      0x3
+
+/* Chelsio's MAC statistics. */
+struct mac_statistics {
+
+	/* Transmit */
+	u32 TxFramesTransmittedOK;
+	u32 TxReserved1;
+	u32 TxReserved2;
+	u32 TxOctetsTransmittedOK;
+	u32 TxFramesWithDeferredXmissions;
+	u32 TxLateCollisions;
+	u32 TxFramesAbortedDueToXSCollisions;
+	u32 TxFramesLostDueToIntMACXmitError;
+	u32 TxReserved3;
+	u32 TxMulticastFrameXmittedOK;
+	u32 TxBroadcastFramesXmittedOK;
+	u32 TxFramesWithExcessiveDeferral;
+	u32 TxPAUSEMACCtrlFramesTransmitted;
+
+	/* Receive */
+	u32 RxFramesReceivedOK;
+	u32 RxFrameCheckSequenceErrors;
+	u32 RxAlignmentErrors;
+	u32 RxOctetsReceivedOK;
+	u32 RxFramesLostDueToIntMACRcvError;
+	u32 RxMulticastFramesReceivedOK;
+	u32 RxBroadcastFramesReceivedOK;
+	u32 RxInRangeLengthErrors;
+	u32 RxTxOutOfRangeLengthField;
+	u32 RxFrameTooLongErrors;
+	u32 RxPAUSEMACCtrlFramesReceived;
+};
+
+static int static_aPorts[] = {
+	FPGA_GMAC_INTERRUPT_PORT0,
+	FPGA_GMAC_INTERRUPT_PORT1,
+	FPGA_GMAC_INTERRUPT_PORT2,
+	FPGA_GMAC_INTERRUPT_PORT3
+};
+
+struct _cmac_instance {
+	u32 index;
+};
+
+static int mac_intr_enable(struct cmac *mac)
+{
+	u32 mac_intr;
+
+	if (t1_is_asic(mac->adapter)) {
+		/* ASIC */
+
+		/* We don't use the on chip MAC for ASIC products. */
+	} else {
+		/* FPGA */
+
+		/* Set parent gmac interrupt. */
+		mac_intr = readl(mac->adapter->regs + A_PL_ENABLE);
+		mac_intr |= FPGA_PCIX_INTERRUPT_GMAC;
+		writel(mac_intr, mac->adapter->regs + A_PL_ENABLE);
+
+		mac_intr = readl(mac->adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_ENABLE);
+		mac_intr |= static_aPorts[mac->instance->index];
+		writel(mac_intr,
+		       mac->adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_ENABLE);
+	}
+
+	return 0;
+}
+
+static int mac_intr_disable(struct cmac *mac)
+{
+	u32 mac_intr;
+
+	if (t1_is_asic(mac->adapter)) {
+		/* ASIC */
+
+		/* We don't use the on chip MAC for ASIC products. */
+	} else {
+		/* FPGA */
+
+		/* Set parent gmac interrupt. */
+		mac_intr = readl(mac->adapter->regs + A_PL_ENABLE);
+		mac_intr &= ~FPGA_PCIX_INTERRUPT_GMAC;
+		writel(mac_intr, mac->adapter->regs + A_PL_ENABLE);
+
+		mac_intr = readl(mac->adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_ENABLE);
+		mac_intr &= ~(static_aPorts[mac->instance->index]);
+		writel(mac_intr,
+		       mac->adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_ENABLE);
+	}
+
+	return 0;
+}
+
+static int mac_intr_clear(struct cmac *mac)
+{
+	u32 mac_intr;
+
+	if (t1_is_asic(mac->adapter)) {
+		/* ASIC */
+
+		/* We don't use the on chip MAC for ASIC products. */
+	} else {
+		/* FPGA */
+
+		/* Set parent gmac interrupt. */
+		writel(FPGA_PCIX_INTERRUPT_GMAC,
+		       mac->adapter->regs +  A_PL_CAUSE);
+		mac_intr = readl(mac->adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE);
+		mac_intr |= (static_aPorts[mac->instance->index]);
+		writel(mac_intr,
+		       mac->adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE);
+	}
+
+	return 0;
+}
+
+static int mac_get_address(struct cmac *mac, u8 addr[6])
+{
+	u32 data32_lo, data32_hi;
+
+	data32_lo = readl(mac->adapter->regs
+			  + MAC_REG_IDLO(mac->instance->index));
+	data32_hi = readl(mac->adapter->regs
+			  + MAC_REG_IDHI(mac->instance->index));
+
+	addr[0] = (u8) ((data32_hi >> 8) & 0xFF);
+	addr[1] = (u8) ((data32_hi) & 0xFF);
+	addr[2] = (u8) ((data32_lo >> 24) & 0xFF);
+	addr[3] = (u8) ((data32_lo >> 16) & 0xFF);
+	addr[4] = (u8) ((data32_lo >> 8) & 0xFF);
+	addr[5] = (u8) ((data32_lo) & 0xFF);
+	return 0;
+}
+
+static int mac_reset(struct cmac *mac)
+{
+	u32 data32;
+	int mac_in_reset, time_out = 100;
+	int idx = mac->instance->index;
+
+	data32 = readl(mac->adapter->regs + MAC_REG_CSR(idx));
+	writel(data32 | F_MAC_RESET,
+	       mac->adapter->regs + MAC_REG_CSR(idx));
+
+	do {
+		data32 = readl(mac->adapter->regs + MAC_REG_CSR(idx));
+
+		mac_in_reset = data32 & F_MAC_RESET;
+		if (mac_in_reset)
+			udelay(1);
+	} while (mac_in_reset && --time_out);
+
+	if (mac_in_reset) {
+		CH_ERR("%s: MAC %d reset timed out\n",
+		       mac->adapter->name, idx);
+		return 2;
+	}
+
+	return 0;
+}
+
+static int mac_set_rx_mode(struct cmac *mac, struct t1_rx_mode *rm)
+{
+	u32 val;
+
+	val = readl(mac->adapter->regs
+			    + MAC_REG_CSR(mac->instance->index));
+	val &= ~(F_MAC_PROMISC | F_MAC_MC_ENABLE);
+	val |= V_MAC_PROMISC(t1_rx_mode_promisc(rm) != 0);
+	val |= V_MAC_MC_ENABLE(t1_rx_mode_allmulti(rm) != 0);
+	writel(val,
+	       mac->adapter->regs + MAC_REG_CSR(mac->instance->index));
+
+	return 0;
+}
+
+static int mac_set_speed_duplex_fc(struct cmac *mac, int speed, int duplex,
+				   int fc)
+{
+	u32 data32;
+
+	data32 = readl(mac->adapter->regs
+			       + MAC_REG_CSR(mac->instance->index));
+	data32 &= ~(F_MAC_HALF_DUPLEX | V_MAC_SPEED(M_MAC_SPEED) |
+		V_INTERFACE(M_INTERFACE) | F_MAC_TX_PAUSE_ENABLE |
+		F_MAC_RX_PAUSE_ENABLE);
+
+	switch (speed) {
+	case SPEED_10:
+	case SPEED_100:
+		data32 |= V_INTERFACE(MAC_CSR_INTERFACE_MII);
+		data32 |= V_MAC_SPEED(speed == SPEED_10 ? 0 : 1);
+		break;
+	case SPEED_1000:
+		data32 |= V_INTERFACE(MAC_CSR_INTERFACE_GMII);
+		data32 |= V_MAC_SPEED(2);
+		break;
+	}
+
+	if (duplex >= 0)
+		data32 |= V_MAC_HALF_DUPLEX(duplex == DUPLEX_HALF);
+
+	if (fc >= 0) {
+		data32 |= V_MAC_RX_PAUSE_ENABLE((fc & PAUSE_RX) != 0);
+		data32 |= V_MAC_TX_PAUSE_ENABLE((fc & PAUSE_TX) != 0);
+	}
+
+	writel(data32,
+	       mac->adapter->regs + MAC_REG_CSR(mac->instance->index));
+	return 0;
+}
+
+static int mac_enable(struct cmac *mac, int which)
+{
+	u32 val;
+
+	val = readl(mac->adapter->regs
+			    + MAC_REG_CSR(mac->instance->index));
+	if (which & MAC_DIRECTION_RX)
+		val |= F_MAC_RX_ENABLE;
+	if (which & MAC_DIRECTION_TX)
+		val |= F_MAC_TX_ENABLE;
+	writel(val,
+	       mac->adapter->regs + MAC_REG_CSR(mac->instance->index));
+	return 0;
+}
+
+static int mac_disable(struct cmac *mac, int which)
+{
+	u32 val;
+
+	val = readl(mac->adapter->regs
+			    + MAC_REG_CSR(mac->instance->index));
+	if (which & MAC_DIRECTION_RX)
+		val &= ~F_MAC_RX_ENABLE;
+	if (which & MAC_DIRECTION_TX)
+		val &= ~F_MAC_TX_ENABLE;
+	writel(val,
+	       mac->adapter->regs + MAC_REG_CSR(mac->instance->index));
+	return 0;
+}
+
+#if 0
+static int mac_set_ifs(struct cmac *mac, u32 mode)
+{
+	t1_write_reg_4(mac->adapter,
+		       MAC_REG_IFS(mac->instance->index),
+		       mode);
+	return 0;
+}
+
+static int mac_enable_isl(struct cmac *mac)
+{
+	u32 data32 = readl(mac->adapter->regs
+				   + MAC_REG_CSR(mac->instance->index));
+	data32 |= F_MAC_RX_ENABLE | F_MAC_TX_ENABLE;
+	t1_write_reg_4(mac->adapter,
+		       MAC_REG_CSR(mac->instance->index),
+		       data32);
+	return 0;
+}
+#endif
+
+static int mac_set_mtu(struct cmac *mac, int mtu)
+{
+	if (mtu > 9600)
+		return -EINVAL;
+	writel(mtu + ETH_HLEN + VLAN_HLEN,
+	       mac->adapter->regs + MAC_REG_LARGEFRAMELENGTH(mac->instance->index));
+
+	return 0;
+}
+
+static const struct cmac_statistics *mac_update_statistics(struct cmac *mac,
+							   int flag)
+{
+	struct mac_statistics st;
+	u32 *p = (u32 *) & st, i;
+
+	writel(0,
+	       mac->adapter->regs + MAC_REG_RMCNT(mac->instance->index));
+
+	for (i = 0; i < sizeof(st) / sizeof(u32); i++)
+		*p++ = readl(mac->adapter->regs
+			     + MAC_REG_RMDATA(mac->instance->index));
+
+	/* XXX convert stats */
+	return &mac->stats;
+}
+
+static void mac_destroy(struct cmac *mac)
+{
+	kfree(mac);
+}
+
+static struct cmac_ops chelsio_mac_ops = {
+	.destroy                 = mac_destroy,
+	.reset                   = mac_reset,
+	.interrupt_enable        = mac_intr_enable,
+	.interrupt_disable       = mac_intr_disable,
+	.interrupt_clear         = mac_intr_clear,
+	.enable                  = mac_enable,
+	.disable                 = mac_disable,
+	.set_mtu                 = mac_set_mtu,
+	.set_rx_mode             = mac_set_rx_mode,
+	.set_speed_duplex_fc     = mac_set_speed_duplex_fc,
+	.macaddress_get          = mac_get_address,
+	.statistics_update       = mac_update_statistics,
+};
+
+static struct cmac *mac_create(adapter_t *adapter, int index)
+{
+	struct cmac *mac;
+	u32 data32;
+
+	if (index >= 4)
+		return NULL;
+
+	mac = kzalloc(sizeof(*mac) + sizeof(cmac_instance), GFP_KERNEL);
+	if (!mac)
+		return NULL;
+
+	mac->ops = &chelsio_mac_ops;
+	mac->instance = (cmac_instance *) (mac + 1);
+
+	mac->instance->index = index;
+	mac->adapter = adapter;
+
+	data32 = readl(adapter->regs + MAC_REG_CSR(mac->instance->index));
+	data32 &= ~(F_MAC_RESET | F_MAC_PROMISC | F_MAC_PROMISC |
+		    F_MAC_LB_ENABLE | F_MAC_RX_ENABLE | F_MAC_TX_ENABLE);
+	data32 |= F_MAC_JUMBO_ENABLE;
+	writel(data32, adapter->regs + MAC_REG_CSR(mac->instance->index));
+
+	/* Initialize the random backoff seed. */
+	data32 = 0x55aa + (3 * index);
+	writel(data32,
+	       adapter->regs + MAC_REG_GMRANDBACKOFFSEED(mac->instance->index));
+
+	/* Check to see if the mac address needs to be set manually. */
+	data32 = readl(adapter->regs + MAC_REG_IDLO(mac->instance->index));
+	if (data32 == 0 || data32 == 0xffffffff) {
+		/*
+		 * Add a default MAC address if we can't read one.
+		 */
+		writel(0x43FFFFFF - index,
+		       adapter->regs + MAC_REG_IDLO(mac->instance->index));
+		writel(0x0007,
+		       adapter->regs + MAC_REG_IDHI(mac->instance->index));
+	}
+
+	(void) mac_set_mtu(mac, 1500);
+	return mac;
+}
+
+struct gmac t1_chelsio_mac_ops = {
+	.create = mac_create
+};

drivers/net/chelsio/subr.c

@@ -185,6 +185,66 @@ static int t1_pci_intr_handler(adapter_t *adapter)
 	return 0;
 }
 
+#ifdef CONFIG_CHELSIO_T1_COUGAR
+#include "cspi.h"
+#endif
+#ifdef CONFIG_CHELSIO_T1_1G
+#include "fpga_defs.h"
+
+/*
+ * PHY interrupt handler for FPGA boards.
+ */
+static int fpga_phy_intr_handler(adapter_t *adapter)
+{
+	int p;
+	u32 cause = readl(adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE);
+
+	for_each_port(adapter, p)
+		if (cause & (1 << p)) {
+			struct cphy *phy = adapter->port[p].phy;
+			int phy_cause = phy->ops->interrupt_handler(phy);
+
+			if (phy_cause & cphy_cause_link_change)
+				t1_link_changed(adapter, p);
+		}
+	writel(cause, adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE);
+	return 0;
+}
+
+/*
+ * Slow path interrupt handler for FPGAs.
+ */
+static int fpga_slow_intr(adapter_t *adapter)
+{
+	u32 cause = readl(adapter->regs + A_PL_CAUSE);
+
+	cause &= ~F_PL_INTR_SGE_DATA;
+	if (cause & F_PL_INTR_SGE_ERR)
+		t1_sge_intr_error_handler(adapter->sge);
+
+	if (cause & FPGA_PCIX_INTERRUPT_GMAC)
+                fpga_phy_intr_handler(adapter);
+
+	if (cause & FPGA_PCIX_INTERRUPT_TP) {
+                /*
+		 * FPGA doesn't support MC4 interrupts and it requires
+		 * this odd layer of indirection for MC5.
+                 */
+		u32 tp_cause = readl(adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE);
+
+		/* Clear TP interrupt */
+		writel(tp_cause, adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE);
+	}
+	if (cause & FPGA_PCIX_INTERRUPT_PCIX)
+		t1_pci_intr_handler(adapter);
+
+	/* Clear the interrupts just processed. */
+	if (cause)
+		writel(cause, adapter->regs + A_PL_CAUSE);
+
+	return cause != 0;
+}
+#endif
 
 /*
  * Wait until Elmer's MI1 interface is ready for new operations.
@@ -221,6 +281,56 @@ static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi)
 	t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val);
 }
 
+#if defined(CONFIG_CHELSIO_T1_1G) || defined(CONFIG_CHELSIO_T1_COUGAR)
+/*
+ * Elmer MI1 MDIO read/write operations.
+ */
+static int mi1_mdio_read(adapter_t *adapter, int phy_addr, int mmd_addr,
+			 int reg_addr, unsigned int *valp)
+{
+	u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr);
+
+	if (mmd_addr)
+		return -EINVAL;
+
+	spin_lock(&adapter->tpi_lock);
+	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
+	__t1_tpi_write(adapter,
+			A_ELMER0_PORT0_MI1_OP, MI1_OP_DIRECT_READ);
+	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
+	__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
+	spin_unlock(&adapter->tpi_lock);
+	return 0;
+}
+
+static int mi1_mdio_write(adapter_t *adapter, int phy_addr, int mmd_addr,
+			  int reg_addr, unsigned int val)
+{
+	u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr);
+
+	if (mmd_addr)
+		return -EINVAL;
+
+	spin_lock(&adapter->tpi_lock);
+	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
+	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
+	__t1_tpi_write(adapter,
+			A_ELMER0_PORT0_MI1_OP, MI1_OP_DIRECT_WRITE);
+	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
+	spin_unlock(&adapter->tpi_lock);
+	return 0;
+}
+
+#if defined(CONFIG_CHELSIO_T1_1G) || defined(CONFIG_CHELSIO_T1_COUGAR)
+static struct mdio_ops mi1_mdio_ops = {
+	mi1_mdio_init,
+	mi1_mdio_read,
+	mi1_mdio_write
+};
+#endif
+
+#endif
+
 static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
 			     int reg_addr, unsigned int *valp)
 {
@@ -330,6 +440,17 @@ static struct board_info t1_board[] = {
   &t1_my3126_ops, &mi1_mdio_ext_ops,
   "Chelsio T210 1x10GBase-CX4 TOE" },
 
+#ifdef CONFIG_CHELSIO_T1_1G
+{ CHBT_BOARD_CHN204, 4/*ports#*/,
+  SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half |
+  SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
+  SUPPORTED_PAUSE | SUPPORTED_TP /*caps*/, CHBT_TERM_T2, CHBT_MAC_VSC7321, CHBT_PHY_88E1111,
+  100000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
+  4/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
+  0/*mdiinv*/, 1/*mdc*/, 4/*phybaseaddr*/, &t1_vsc7326_ops,
+  &t1_mv88e1xxx_ops, &mi1_mdio_ops,
+  "Chelsio N204 4x100/1000BaseT NIC" },
+#endif
 
 };
 
@@ -483,6 +604,48 @@ int t1_elmer0_ext_intr_handler(adapter_t *adapter)
 	t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
 
 	switch (board_info(adapter)->board) {
+#ifdef CONFIG_CHELSIO_T1_1G
+        case CHBT_BOARD_CHT204:
+        case CHBT_BOARD_CHT204E:
+        case CHBT_BOARD_CHN204:
+        case CHBT_BOARD_CHT204V: {
+                int i, port_bit;
+		for_each_port(adapter, i) {
+			port_bit = i + 1;
+			if (!(cause & (1 << port_bit))) continue;
+
+	                phy = adapter->port[i].phy;
+			phy_cause = phy->ops->interrupt_handler(phy);
+			if (phy_cause & cphy_cause_link_change)
+				t1_link_changed(adapter, i);
+		}
+                break;
+        }
+	case CHBT_BOARD_CHT101:
+		if (cause & ELMER0_GP_BIT1) { /* Marvell 88E1111 interrupt */
+			phy = adapter->port[0].phy;
+			phy_cause = phy->ops->interrupt_handler(phy);
+			if (phy_cause & cphy_cause_link_change)
+				t1_link_changed(adapter, 0);
+		}
+		break;
+	case CHBT_BOARD_7500: {
+		int p;
+    		/*
+		 * Elmer0's interrupt cause isn't useful here because there is
+		 * only one bit that can be set for all 4 ports.  This means
+		 * we are forced to check every PHY's interrupt status
+		 * register to see who initiated the interrupt.
+     		 */
+    		for_each_port(adapter, p) {
+			phy = adapter->port[p].phy;
+			phy_cause = phy->ops->interrupt_handler(phy);
+			if (phy_cause & cphy_cause_link_change)
+			    t1_link_changed(adapter, p);
+		}
+		break;
+	}
+#endif
 	case CHBT_BOARD_CHT210:
 	case CHBT_BOARD_N210:
 	case CHBT_BOARD_N110:
@@ -511,6 +674,30 @@ int t1_elmer0_ext_intr_handler(adapter_t *adapter)
 			       mod_detect ? "removed" : "inserted");
     		}
 		break;
+#ifdef CONFIG_CHELSIO_T1_COUGAR
+	case CHBT_BOARD_COUGAR:
+		if (adapter->params.nports == 1) {
+			if (cause & ELMER0_GP_BIT1) {         /* Vitesse MAC */
+				struct cmac *mac = adapter->port[0].mac;
+				mac->ops->interrupt_handler(mac);
+			}
+			if (cause & ELMER0_GP_BIT5) {     /* XPAK MOD_DETECT */
+			}
+		} else {
+			int i, port_bit;
+
+			for_each_port(adapter, i) {
+				port_bit = i ? i + 1 : 0;
+				if (!(cause & (1 << port_bit))) continue;
+
+				phy = adapter->port[i].phy;
+				phy_cause = phy->ops->interrupt_handler(phy);
+				if (phy_cause & cphy_cause_link_change)
+					t1_link_changed(adapter, i);
+			}
+		}
+		break;
+#endif
 	}
 	t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause);
 	return 0;
@@ -633,6 +820,10 @@ static int asic_slow_intr(adapter_t *adapter)
 
 int t1_slow_intr_handler(adapter_t *adapter)
 {
+#ifdef CONFIG_CHELSIO_T1_1G
+	if (!t1_is_asic(adapter))
+		return fpga_slow_intr(adapter);
+#endif
 	return asic_slow_intr(adapter);
 }
 
@@ -698,6 +889,21 @@ static int board_init(adapter_t *adapter, const struct board_info *bi)
      		 */
     		power_sequence_xpak(adapter);
 		break;
+#ifdef CONFIG_CHELSIO_T1_1G
+    case CHBT_BOARD_CHT204E:
+		        /* add config space write here */
+	case CHBT_BOARD_CHT204:
+	case CHBT_BOARD_CHT204V:
+	case CHBT_BOARD_CHN204:
+                t1_tpi_par(adapter, 0xf);
+                t1_tpi_write(adapter, A_ELMER0_GPO, 0x804);
+                break;
+	case CHBT_BOARD_CHT101:
+	case CHBT_BOARD_7500:
+    		t1_tpi_par(adapter, 0xf);
+    		t1_tpi_write(adapter, A_ELMER0_GPO, 0x1804);
+		break;
+#endif
 	}
 	return 0;
 }
@@ -719,6 +925,10 @@ int t1_init_hw_modules(adapter_t *adapter)
 		       adapter->regs + A_MC5_CONFIG);
 	}
 
+#ifdef CONFIG_CHELSIO_T1_COUGAR
+	if (adapter->cspi && t1_cspi_init(adapter->cspi))
+		goto out_err;
+#endif
 	if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac,
 					  bi->espi_nports))
 		goto out_err;
@@ -772,6 +982,10 @@ void t1_free_sw_modules(adapter_t *adapter)
 		t1_tp_destroy(adapter->tp);
 	if (adapter->espi)
 		t1_espi_destroy(adapter->espi);
+#ifdef CONFIG_CHELSIO_T1_COUGAR
+        if (adapter->cspi)
+		t1_cspi_destroy(adapter->cspi);
+#endif
 }
 
 static void __devinit init_link_config(struct link_config *lc,
@@ -791,6 +1005,13 @@ static void __devinit init_link_config(struct link_config *lc,
 	}
 }
 
+#ifdef CONFIG_CHELSIO_T1_COUGAR
+	if (bi->clock_cspi && !(adapter->cspi = t1_cspi_create(adapter))) {
+		CH_ERR("%s: CSPI initialization failed\n",
+		       adapter->name);
+		goto error;
+        }
+#endif
 
 /*
  * Allocate and initialize the data structures that hold the SW state of

drivers/net/chelsio/tp.c

@@ -2,6 +2,9 @@
 #include "common.h"
 #include "regs.h"
 #include "tp.h"
+#ifdef CONFIG_CHELSIO_T1_1G
+#include "fpga_defs.h"
+#endif
 
 struct petp {
 	adapter_t *adapter;
@@ -70,6 +73,15 @@ void t1_tp_intr_enable(struct petp *tp)
 {
 	u32 tp_intr = readl(tp->adapter->regs + A_PL_ENABLE);
 
+#ifdef CONFIG_CHELSIO_T1_1G
+	if (!t1_is_asic(tp->adapter)) {
+		/* FPGA */
+		writel(0xffffffff,
+		       tp->adapter->regs + FPGA_TP_ADDR_INTERRUPT_ENABLE);
+		writel(tp_intr | FPGA_PCIX_INTERRUPT_TP,
+		       tp->adapter->regs + A_PL_ENABLE);
+	} else
+#endif
 	{
 		/* We don't use any TP interrupts */
 		writel(0, tp->adapter->regs + A_TP_INT_ENABLE);
@@ -82,6 +94,14 @@ void t1_tp_intr_disable(struct petp *tp)
 {
 	u32 tp_intr = readl(tp->adapter->regs + A_PL_ENABLE);
 
+#ifdef CONFIG_CHELSIO_T1_1G
+	if (!t1_is_asic(tp->adapter)) {
+		/* FPGA */
+		writel(0, tp->adapter->regs + FPGA_TP_ADDR_INTERRUPT_ENABLE);
+		writel(tp_intr & ~FPGA_PCIX_INTERRUPT_TP,
+		       tp->adapter->regs + A_PL_ENABLE);
+	} else
+#endif
 	{
 		writel(0, tp->adapter->regs + A_TP_INT_ENABLE);
 		writel(tp_intr & ~F_PL_INTR_TP,
@@ -91,6 +111,14 @@ void t1_tp_intr_disable(struct petp *tp)
 
 void t1_tp_intr_clear(struct petp *tp)
 {
+#ifdef CONFIG_CHELSIO_T1_1G
+	if (!t1_is_asic(tp->adapter)) {
+		writel(0xffffffff,
+		       tp->adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE);
+		writel(FPGA_PCIX_INTERRUPT_TP, tp->adapter->regs + A_PL_CAUSE);
+		return;
+	}
+#endif
 	writel(0xffffffff, tp->adapter->regs + A_TP_INT_CAUSE);
 	writel(F_PL_INTR_TP, tp->adapter->regs + A_PL_CAUSE);
 }
@@ -99,6 +127,11 @@ int t1_tp_intr_handler(struct petp *tp)
 {
 	u32 cause;
 
+#ifdef CONFIG_CHELSIO_T1_1G
+	/* FPGA doesn't support TP interrupts. */
+	if (!t1_is_asic(tp->adapter))
+		return 1;
+#endif
 
 	cause = readl(tp->adapter->regs + A_TP_INT_CAUSE);
 	writel(cause, tp->adapter->regs + A_TP_INT_CAUSE);

drivers/net/chelsio/vsc8244.c

+/*
+ * This file is part of the Chelsio T2 Ethernet driver.
+ *
+ * Copyright (C) 2005 Chelsio Communications.  All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the LICENSE file included in this
+ * release for licensing terms and conditions.
+ */
+
+#include "common.h"
+#include "cphy.h"
+#include "elmer0.h"
+
+#ifndef ADVERTISE_PAUSE_CAP
+# define ADVERTISE_PAUSE_CAP 0x400
+#endif
+#ifndef ADVERTISE_PAUSE_ASYM
+# define ADVERTISE_PAUSE_ASYM 0x800
+#endif
+
+/* Gigabit MII registers */
+#ifndef MII_CTRL1000
+# define MII_CTRL1000 9
+#endif
+
+#ifndef ADVERTISE_1000FULL
+# define ADVERTISE_1000FULL 0x200
+# define ADVERTISE_1000HALF 0x100
+#endif
+
+/* VSC8244 PHY specific registers. */
+enum {
+	VSC8244_INTR_ENABLE   = 25,
+	VSC8244_INTR_STATUS   = 26,
+	VSC8244_AUX_CTRL_STAT = 28,
+};
+
+enum {
+	VSC_INTR_RX_ERR     = 1 << 0,
+	VSC_INTR_MS_ERR     = 1 << 1,  /* master/slave resolution error */
+	VSC_INTR_CABLE      = 1 << 2,  /* cable impairment */
+	VSC_INTR_FALSE_CARR = 1 << 3,  /* false carrier */
+	VSC_INTR_MEDIA_CHG  = 1 << 4,  /* AMS media change */
+	VSC_INTR_RX_FIFO    = 1 << 5,  /* Rx FIFO over/underflow */
+	VSC_INTR_TX_FIFO    = 1 << 6,  /* Tx FIFO over/underflow */
+	VSC_INTR_DESCRAMBL  = 1 << 7,  /* descrambler lock-lost */
+	VSC_INTR_SYMBOL_ERR = 1 << 8,  /* symbol error */
+	VSC_INTR_NEG_DONE   = 1 << 10, /* autoneg done */
+	VSC_INTR_NEG_ERR    = 1 << 11, /* autoneg error */
+	VSC_INTR_LINK_CHG   = 1 << 13, /* link change */
+	VSC_INTR_ENABLE     = 1 << 15, /* interrupt enable */
+};
+
+#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \
+	 		   VSC_INTR_NEG_DONE)
+#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \
+		   VSC_INTR_ENABLE)
+
+/* PHY specific auxiliary control & status register fields */
+#define S_ACSR_ACTIPHY_TMR    0
+#define M_ACSR_ACTIPHY_TMR    0x3
+#define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR)
+
+#define S_ACSR_SPEED    3
+#define M_ACSR_SPEED    0x3
+#define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED)
+
+#define S_ACSR_DUPLEX 5
+#define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX)
+
+#define S_ACSR_ACTIPHY 6
+#define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY)
+
+/*
+ * Reset the PHY.  This PHY completes reset immediately so we never wait.
+ */
+static int vsc8244_reset(struct cphy *cphy, int wait)
+{
+	int err;
+	unsigned int ctl;
+
+	err = simple_mdio_read(cphy, MII_BMCR, &ctl);
+	if (err)
+		return err;
+
+	ctl &= ~BMCR_PDOWN;
+	ctl |= BMCR_RESET;
+	return simple_mdio_write(cphy, MII_BMCR, ctl);
+}
+
+static int vsc8244_intr_enable(struct cphy *cphy)
+{
+	simple_mdio_write(cphy, VSC8244_INTR_ENABLE, INTR_MASK);
+
+    /* Enable interrupts through Elmer */
+	if (t1_is_asic(cphy->adapter)) {
+		u32 elmer;
+
+		t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+		elmer |= ELMER0_GP_BIT1;
+		if (is_T2(cphy->adapter)) {
+		    elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
+                }
+		t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+	}
+
+    return 0;
+}
+
+static int vsc8244_intr_disable(struct cphy *cphy)
+{
+	simple_mdio_write(cphy, VSC8244_INTR_ENABLE, 0);
+
+	if (t1_is_asic(cphy->adapter)) {
+		u32 elmer;
+
+		t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+		elmer &= ~ELMER0_GP_BIT1;
+		if (is_T2(cphy->adapter)) {
+		    elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4);
+                }
+		t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+	}
+
+    return 0;
+}
+
+static int vsc8244_intr_clear(struct cphy *cphy)
+{
+	u32 val;
+    u32 elmer;
+
+	/* Clear PHY interrupts by reading the register. */
+	simple_mdio_read(cphy, VSC8244_INTR_ENABLE, &val);
+
+	if (t1_is_asic(cphy->adapter)) {
+		t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
+		elmer |= ELMER0_GP_BIT1;
+		if (is_T2(cphy->adapter)) {
+		    elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
+                }
+		t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
+	}
+
+    return 0;
+}
+
+/*
+ * Force the PHY speed and duplex.  This also disables auto-negotiation, except
+ * for 1Gb/s, where auto-negotiation is mandatory.
+ */
+static int vsc8244_set_speed_duplex(struct cphy *phy, int speed, int duplex)
+{
+	int err;
+	unsigned int ctl;
+
+	err = simple_mdio_read(phy, MII_BMCR, &ctl);
+	if (err)
+		return err;
+
+	if (speed >= 0) {
+		ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
+		if (speed == SPEED_100)
+			ctl |= BMCR_SPEED100;
+		else if (speed == SPEED_1000)
+			ctl |= BMCR_SPEED1000;
+	}
+	if (duplex >= 0) {
+		ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE);
+		if (duplex == DUPLEX_FULL)
+			ctl |= BMCR_FULLDPLX;
+	}
+	if (ctl & BMCR_SPEED1000)  /* auto-negotiation required for 1Gb/s */
+		ctl |= BMCR_ANENABLE;
+	return simple_mdio_write(phy, MII_BMCR, ctl);
+}
+
+int t1_mdio_set_bits(struct cphy *phy, int mmd, int reg, unsigned int bits)
+{
+    int ret;
+    unsigned int val;
+
+    ret = mdio_read(phy, mmd, reg, &val);
+    if (!ret)
+        ret = mdio_write(phy, mmd, reg, val | bits);
+    return ret;
+}
+
+static int vsc8244_autoneg_enable(struct cphy *cphy)
+{
+	return t1_mdio_set_bits(cphy, 0, MII_BMCR,
+				BMCR_ANENABLE | BMCR_ANRESTART);
+}
+
+static int vsc8244_autoneg_restart(struct cphy *cphy)
+{
+	return t1_mdio_set_bits(cphy, 0, MII_BMCR, BMCR_ANRESTART);
+}
+
+static int vsc8244_advertise(struct cphy *phy, unsigned int advertise_map)
+{
+	int err;
+	unsigned int val = 0;
+
+	err = simple_mdio_read(phy, MII_CTRL1000, &val);
+	if (err)
+		return err;
+
+	val &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
+	if (advertise_map & ADVERTISED_1000baseT_Half)
+		val |= ADVERTISE_1000HALF;
+	if (advertise_map & ADVERTISED_1000baseT_Full)
+		val |= ADVERTISE_1000FULL;
+
+	err = simple_mdio_write(phy, MII_CTRL1000, val);
+	if (err)
+		return err;
+
+	val = 1;
+	if (advertise_map & ADVERTISED_10baseT_Half)
+		val |= ADVERTISE_10HALF;
+	if (advertise_map & ADVERTISED_10baseT_Full)
+		val |= ADVERTISE_10FULL;
+	if (advertise_map & ADVERTISED_100baseT_Half)
+		val |= ADVERTISE_100HALF;
+	if (advertise_map & ADVERTISED_100baseT_Full)
+		val |= ADVERTISE_100FULL;
+	if (advertise_map & ADVERTISED_PAUSE)
+		val |= ADVERTISE_PAUSE_CAP;
+	if (advertise_map & ADVERTISED_ASYM_PAUSE)
+		val |= ADVERTISE_PAUSE_ASYM;
+	return simple_mdio_write(phy, MII_ADVERTISE, val);
+}
+
+static int vsc8244_get_link_status(struct cphy *cphy, int *link_ok,
+				     int *speed, int *duplex, int *fc)
+{
+	unsigned int bmcr, status, lpa, adv;
+	int err, sp = -1, dplx = -1, pause = 0;
+
+	err = simple_mdio_read(cphy, MII_BMCR, &bmcr);
+	if (!err)
+		err = simple_mdio_read(cphy, MII_BMSR, &status);
+	if (err)
+		return err;
+
+	if (link_ok) {
+		/*
+		 * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
+		 * once more to get the current link state.
+		 */
+		if (!(status & BMSR_LSTATUS))
+			err = simple_mdio_read(cphy, MII_BMSR, &status);
+		if (err)
+			return err;
+		*link_ok = (status & BMSR_LSTATUS) != 0;
+	}
+	if (!(bmcr & BMCR_ANENABLE)) {
+		dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+		if (bmcr & BMCR_SPEED1000)
+			sp = SPEED_1000;
+		else if (bmcr & BMCR_SPEED100)
+			sp = SPEED_100;
+		else
+			sp = SPEED_10;
+	} else if (status & BMSR_ANEGCOMPLETE) {
+		err = simple_mdio_read(cphy, VSC8244_AUX_CTRL_STAT, &status);
+		if (err)
+			return err;
+
+		dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
+		sp = G_ACSR_SPEED(status);
+		if (sp == 0)
+			sp = SPEED_10;
+		else if (sp == 1)
+			sp = SPEED_100;
+		else
+			sp = SPEED_1000;
+
+		if (fc && dplx == DUPLEX_FULL) {
+			err = simple_mdio_read(cphy, MII_LPA, &lpa);
+			if (!err)
+				err = simple_mdio_read(cphy, MII_ADVERTISE,
+						       &adv);
+			if (err)
+				return err;
+
+			if (lpa & adv & ADVERTISE_PAUSE_CAP)
+				pause = PAUSE_RX | PAUSE_TX;
+			else if ((lpa & ADVERTISE_PAUSE_CAP) &&
+				 (lpa & ADVERTISE_PAUSE_ASYM) &&
+				 (adv & ADVERTISE_PAUSE_ASYM))
+				pause = PAUSE_TX;
+			else if ((lpa & ADVERTISE_PAUSE_ASYM) &&
+				 (adv & ADVERTISE_PAUSE_CAP))
+				pause = PAUSE_RX;
+		}
+	}
+	if (speed)
+		*speed = sp;
+	if (duplex)
+		*duplex = dplx;
+	if (fc)
+		*fc = pause;
+	return 0;
+}
+
+static int vsc8244_intr_handler(struct cphy *cphy)
+{
+	unsigned int cause;
+	int err, cphy_cause = 0;
+
+	err = simple_mdio_read(cphy, VSC8244_INTR_STATUS, &cause);
+	if (err)
+		return err;
+
+	cause &= INTR_MASK;
+	if (cause & CFG_CHG_INTR_MASK)
+		cphy_cause |= cphy_cause_link_change;
+	if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO))
+		cphy_cause |= cphy_cause_fifo_error;
+	return cphy_cause;
+}
+
+static void vsc8244_destroy(struct cphy *cphy)
+{
+	kfree(cphy);
+}
+
+static struct cphy_ops vsc8244_ops = {
+	.destroy              = vsc8244_destroy,
+	.reset                = vsc8244_reset,
+	.interrupt_enable     = vsc8244_intr_enable,
+	.interrupt_disable    = vsc8244_intr_disable,
+	.interrupt_clear      = vsc8244_intr_clear,
+	.interrupt_handler    = vsc8244_intr_handler,
+	.autoneg_enable       = vsc8244_autoneg_enable,
+	.autoneg_restart      = vsc8244_autoneg_restart,
+	.advertise            = vsc8244_advertise,
+	.set_speed_duplex     = vsc8244_set_speed_duplex,
+	.get_link_status      = vsc8244_get_link_status
+};
+
+static struct cphy* vsc8244_phy_create(adapter_t *adapter, int phy_addr, struct mdio_ops *mdio_ops)
+{
+	struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL);
+
+	if (!cphy) return NULL;
+
+	cphy_init(cphy, adapter, phy_addr, &vsc8244_ops, mdio_ops);
+
+	return cphy;
+}
+
+
+static int vsc8244_phy_reset(adapter_t* adapter)
+{
+	return 0;
+}
+
+struct gphy t1_vsc8244_ops = {
+	vsc8244_phy_create,
+	vsc8244_phy_reset
+};
+
+

drivers/net/chelsio/vsc8244_reg.h

+/* $Date: 2005/11/23 16:28:53 $ $RCSfile: vsc8244_reg.h,v $ $Revision: 1.1 $ */
+#ifndef CHELSIO_MV8E1XXX_H
+#define CHELSIO_MV8E1XXX_H
+
+#ifndef BMCR_SPEED1000
+# define BMCR_SPEED1000 0x40
+#endif
+
+#ifndef ADVERTISE_PAUSE
+# define ADVERTISE_PAUSE 0x400
+#endif
+#ifndef ADVERTISE_PAUSE_ASYM
+# define ADVERTISE_PAUSE_ASYM 0x800
+#endif
+
+/* Gigabit MII registers */
+#define MII_GBMR 1       /* 1000Base-T mode register */
+#define MII_GBCR 9       /* 1000Base-T control register */
+#define MII_GBSR 10      /* 1000Base-T status register */
+
+/* 1000Base-T control register fields */
+#define GBCR_ADV_1000HALF         0x100
+#define GBCR_ADV_1000FULL         0x200
+#define GBCR_PREFER_MASTER        0x400
+#define GBCR_MANUAL_AS_MASTER     0x800
+#define GBCR_MANUAL_CONFIG_ENABLE 0x1000
+
+/* 1000Base-T status register fields */
+#define GBSR_LP_1000HALF  0x400
+#define GBSR_LP_1000FULL  0x800
+#define GBSR_REMOTE_OK    0x1000
+#define GBSR_LOCAL_OK     0x2000
+#define GBSR_LOCAL_MASTER 0x4000
+#define GBSR_MASTER_FAULT 0x8000
+
+/* Vitesse PHY interrupt status bits. */
+#if 0
+#define VSC8244_INTR_JABBER          0x0001
+#define VSC8244_INTR_POLARITY_CHNG   0x0002
+#define VSC8244_INTR_ENG_DETECT_CHNG 0x0010
+#define VSC8244_INTR_DOWNSHIFT       0x0020
+#define VSC8244_INTR_MDI_XOVER_CHNG  0x0040
+#define VSC8244_INTR_FIFO_OVER_UNDER 0x0080
+#define VSC8244_INTR_FALSE_CARRIER   0x0100
+#define VSC8244_INTR_SYMBOL_ERROR    0x0200
+#define VSC8244_INTR_LINK_CHNG       0x0400
+#define VSC8244_INTR_AUTONEG_DONE    0x0800
+#define VSC8244_INTR_PAGE_RECV       0x1000
+#define VSC8244_INTR_DUPLEX_CHNG     0x2000
+#define VSC8244_INTR_SPEED_CHNG      0x4000
+#define VSC8244_INTR_AUTONEG_ERR     0x8000
+#else
+//#define VSC8244_INTR_JABBER          0x0001
+//#define VSC8244_INTR_POLARITY_CHNG   0x0002
+//#define VSC8244_INTR_BIT2            0x0004
+//#define VSC8244_INTR_BIT3            0x0008
+#define VSC8244_INTR_RX_ERR          0x0001
+#define VSC8244_INTR_MASTER_SLAVE    0x0002
+#define VSC8244_INTR_CABLE_IMPAIRED  0x0004
+#define VSC8244_INTR_FALSE_CARRIER   0x0008
+//#define VSC8244_INTR_ENG_DETECT_CHNG 0x0010
+//#define VSC8244_INTR_DOWNSHIFT       0x0020
+//#define VSC8244_INTR_MDI_XOVER_CHNG  0x0040
+//#define VSC8244_INTR_FIFO_OVER_UNDER 0x0080
+#define VSC8244_INTR_BIT4            0x0010
+#define VSC8244_INTR_FIFO_RX         0x0020
+#define VSC8244_INTR_FIFO_OVER_UNDER 0x0040
+#define VSC8244_INTR_LOCK_LOST       0x0080
+//#define VSC8244_INTR_FALSE_CARRIER   0x0100
+//#define VSC8244_INTR_SYMBOL_ERROR    0x0200
+//#define VSC8244_INTR_LINK_CHNG       0x0400
+//#define VSC8244_INTR_AUTONEG_DONE    0x0800
+#define VSC8244_INTR_SYMBOL_ERROR    0x0100
+#define VSC8244_INTR_ENG_DETECT_CHNG 0x0200
+#define VSC8244_INTR_AUTONEG_DONE    0x0400
+#define VSC8244_INTR_AUTONEG_ERR     0x0800
+//#define VSC8244_INTR_PAGE_RECV       0x1000
+//#define VSC8244_INTR_DUPLEX_CHNG     0x2000
+//#define VSC8244_INTR_SPEED_CHNG      0x4000
+//#define VSC8244_INTR_AUTONEG_ERR     0x8000
+#define VSC8244_INTR_DUPLEX_CHNG     0x1000
+#define VSC8244_INTR_LINK_CHNG       0x2000
+#define VSC8244_INTR_SPEED_CHNG      0x4000
+#define VSC8244_INTR_STATUS          0x8000
+#endif
+
+
+/* Vitesse PHY specific registers. */
+#define VSC8244_SPECIFIC_CNTRL_REGISTER               16
+#define VSC8244_SPECIFIC_STATUS_REGISTER              0x1c
+#define VSC8244_INTERRUPT_ENABLE_REGISTER             0x19
+#define VSC8244_INTERRUPT_STATUS_REGISTER             0x1a
+#define VSC8244_EXT_PHY_SPECIFIC_CNTRL_REGISTER       20
+#define VSC8244_RECV_ERR_CNTR_REGISTER                21
+#define VSC8244_RES_REGISTER                          22
+#define VSC8244_GLOBAL_STATUS_REGISTER                23
+#define VSC8244_LED_CONTROL_REGISTER                  24
+#define VSC8244_MANUAL_LED_OVERRIDE_REGISTER          25
+#define VSC8244_EXT_PHY_SPECIFIC_CNTRL_2_REGISTER     26
+#define VSC8244_EXT_PHY_SPECIFIC_STATUS_REGISTER      27
+#define VSC8244_VIRTUAL_CABLE_TESTER_REGISTER         28
+#define VSC8244_EXTENDED_ADDR_REGISTER                29
+#define VSC8244_EXTENDED_REGISTER                     30
+
+/* PHY specific control register fields */
+#define S_PSCR_MDI_XOVER_MODE    5
+#define M_PSCR_MDI_XOVER_MODE    0x3
+#define V_PSCR_MDI_XOVER_MODE(x) ((x) << S_PSCR_MDI_XOVER_MODE)
+#define G_PSCR_MDI_XOVER_MODE(x) (((x) >> S_PSCR_MDI_XOVER_MODE) & M_PSCR_MDI_XOVER_MODE)
+
+/* Extended PHY specific control register fields */
+#define S_DOWNSHIFT_ENABLE 8
+#define V_DOWNSHIFT_ENABLE (1 << S_DOWNSHIFT_ENABLE)
+
+#define S_DOWNSHIFT_CNT    9
+#define M_DOWNSHIFT_CNT    0x7
+#define V_DOWNSHIFT_CNT(x) ((x) << S_DOWNSHIFT_CNT)
+#define G_DOWNSHIFT_CNT(x) (((x) >> S_DOWNSHIFT_CNT) & M_DOWNSHIFT_CNT)
+
+/* PHY specific status register fields */
+#define S_PSSR_JABBER 0
+#define V_PSSR_JABBER (1 << S_PSSR_JABBER)
+
+#define S_PSSR_POLARITY 1
+#define V_PSSR_POLARITY (1 << S_PSSR_POLARITY)
+
+#define S_PSSR_RX_PAUSE 2
+#define V_PSSR_RX_PAUSE (1 << S_PSSR_RX_PAUSE)
+
+#define S_PSSR_TX_PAUSE 3
+#define V_PSSR_TX_PAUSE (1 << S_PSSR_TX_PAUSE)
+
+#define S_PSSR_ENERGY_DETECT 4
+#define V_PSSR_ENERGY_DETECT (1 << S_PSSR_ENERGY_DETECT)
+
+#define S_PSSR_DOWNSHIFT_STATUS 5
+#define V_PSSR_DOWNSHIFT_STATUS (1 << S_PSSR_DOWNSHIFT_STATUS)
+
+#define S_PSSR_MDI 6
+#define V_PSSR_MDI (1 << S_PSSR_MDI)
+
+#define S_PSSR_CABLE_LEN    7
+#define M_PSSR_CABLE_LEN    0x7
+#define V_PSSR_CABLE_LEN(x) ((x) << S_PSSR_CABLE_LEN)
+#define G_PSSR_CABLE_LEN(x) (((x) >> S_PSSR_CABLE_LEN) & M_PSSR_CABLE_LEN)
+
+//#define S_PSSR_LINK 10
+//#define S_PSSR_LINK 13
+#define S_PSSR_LINK 2
+#define V_PSSR_LINK (1 << S_PSSR_LINK)
+
+//#define S_PSSR_STATUS_RESOLVED 11
+//#define S_PSSR_STATUS_RESOLVED 10
+#define S_PSSR_STATUS_RESOLVED 15
+#define V_PSSR_STATUS_RESOLVED (1 << S_PSSR_STATUS_RESOLVED)
+
+#define S_PSSR_PAGE_RECEIVED 12
+#define V_PSSR_PAGE_RECEIVED (1 << S_PSSR_PAGE_RECEIVED)
+
+//#define S_PSSR_DUPLEX 13
+//#define S_PSSR_DUPLEX 12
+#define S_PSSR_DUPLEX 5
+#define V_PSSR_DUPLEX (1 << S_PSSR_DUPLEX)
+
+//#define S_PSSR_SPEED    14
+//#define S_PSSR_SPEED    14
+#define S_PSSR_SPEED    3
+#define M_PSSR_SPEED    0x3
+#define V_PSSR_SPEED(x) ((x) << S_PSSR_SPEED)
+#define G_PSSR_SPEED(x) (((x) >> S_PSSR_SPEED) & M_PSSR_SPEED)
+
+#endif