Commit 352c4cf4 authored by He Zhe's avatar He Zhe Committed by Greg Kroah-Hartman

serial: 8250: Fix serial8250 initialization crash

The initialization code of interrupt backoff work might reference NULL
pointer and cause the following crash, if no port was found.

[   10.017727] CPU 0 Unable to handle kernel paging request at virtual address 000001b0, epc == 807088e0, ra == 8070863c
---- snip ----
[   11.704470] [<807088e0>] serial8250_register_8250_port+0x318/0x4ac
[   11.747251] [<80708d74>] serial8250_probe+0x148/0x1c0
[   11.789301] [<80728450>] platform_drv_probe+0x40/0x94
[   11.830515] [<807264f8>] really_probe+0xf8/0x318
[   11.870876] [<80726b7c>] __driver_attach+0x110/0x12c
[   11.910960] [<80724374>] bus_for_each_dev+0x78/0xcc
[   11.951134] [<80725958>] bus_add_driver+0x200/0x234
[   11.989756] [<807273d8>] driver_register+0x84/0x148
[   12.029832] [<80d72f84>] serial8250_init+0x138/0x198
[   12.070447] [<80100e6c>] do_one_initcall+0x5c/0x2a0
[   12.110104] [<80d3a208>] kernel_init_freeable+0x370/0x484
[   12.150722] [<80a49420>] kernel_init+0x10/0xf8
[   12.191517] [<8010756c>] ret_from_kernel_thread+0x14/0x1c

This patch makes sure the initialization code can be reached only if a port
is found.

Fixes: 6d7f677a ("serial: 8250: Rate limit serial port rx interrupts during input overruns")
Signed-off-by: default avatarHe Zhe <zhe.he@windriver.com>
Reviewed-by: default avatarDarwin Dingel <darwin.dingel@alliedtelesis.co.nz>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent aff9cf59
......@@ -1070,15 +1070,16 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
ret = 0;
}
}
/* Initialise interrupt backoff work if required */
if (up->overrun_backoff_time_ms > 0) {
uart->overrun_backoff_time_ms = up->overrun_backoff_time_ms;
INIT_DELAYED_WORK(&uart->overrun_backoff,
serial_8250_overrun_backoff_work);
} else {
uart->overrun_backoff_time_ms = 0;
/* Initialise interrupt backoff work if required */
if (up->overrun_backoff_time_ms > 0) {
uart->overrun_backoff_time_ms =
up->overrun_backoff_time_ms;
INIT_DELAYED_WORK(&uart->overrun_backoff,
serial_8250_overrun_backoff_work);
} else {
uart->overrun_backoff_time_ms = 0;
}
}
mutex_unlock(&serial_mutex);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment