Commit 3557c9ae authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge tag 'for-usb-linus-2012-08-09' of...

Merge tag 'for-usb-linus-2012-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus

Intel xhci: Work around immediate reboot on shutdown.

Hi Greg,

I'm cleaning out my queue before I leave on vacation tomorrow, so here's
one more patch for 3.6.  It works around an issue on a couple Intel
Panther Point desktop systems that cause them to reboot about 10 seconds
after the user shutdowns the system.

Sarah Sharp
parents ded737fe e95829f4
...@@ -800,6 +800,13 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) ...@@ -800,6 +800,13 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
} }
EXPORT_SYMBOL_GPL(usb_enable_xhci_ports); EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
{
pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0);
pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0);
}
EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
/** /**
* PCI Quirks for xHCI. * PCI Quirks for xHCI.
* *
......
...@@ -10,6 +10,7 @@ void usb_amd_quirk_pll_disable(void); ...@@ -10,6 +10,7 @@ void usb_amd_quirk_pll_disable(void);
void usb_amd_quirk_pll_enable(void); void usb_amd_quirk_pll_enable(void);
bool usb_is_intel_switchable_xhci(struct pci_dev *pdev); bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
void usb_enable_xhci_ports(struct pci_dev *xhci_pdev); void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
#else #else
static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {} static inline void usb_amd_quirk_pll_enable(void) {}
......
...@@ -94,6 +94,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) ...@@ -94,6 +94,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
xhci->quirks |= XHCI_EP_LIMIT_QUIRK; xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
xhci->limit_active_eps = 64; xhci->limit_active_eps = 64;
xhci->quirks |= XHCI_SW_BW_CHECKING; xhci->quirks |= XHCI_SW_BW_CHECKING;
/*
* PPT desktop boards DH77EB and DH77DF will power back on after
* a few seconds of being shutdown. The fix for this is to
* switch the ports from xHCI to EHCI on shutdown. We can't use
* DMI information to find those particular boards (since each
* vendor will change the board name), so we have to key off all
* PPT chipsets.
*/
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
} }
if (pdev->vendor == PCI_VENDOR_ID_ETRON && if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
pdev->device == PCI_DEVICE_ID_ASROCK_P67) { pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
......
...@@ -659,6 +659,9 @@ void xhci_shutdown(struct usb_hcd *hcd) ...@@ -659,6 +659,9 @@ void xhci_shutdown(struct usb_hcd *hcd)
{ {
struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct xhci_hcd *xhci = hcd_to_xhci(hcd);
if (xhci->quirks && XHCI_SPURIOUS_REBOOT)
usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
spin_lock_irq(&xhci->lock); spin_lock_irq(&xhci->lock);
xhci_halt(xhci); xhci_halt(xhci);
spin_unlock_irq(&xhci->lock); spin_unlock_irq(&xhci->lock);
......
...@@ -1494,6 +1494,7 @@ struct xhci_hcd { ...@@ -1494,6 +1494,7 @@ struct xhci_hcd {
#define XHCI_TRUST_TX_LENGTH (1 << 10) #define XHCI_TRUST_TX_LENGTH (1 << 10)
#define XHCI_LPM_SUPPORT (1 << 11) #define XHCI_LPM_SUPPORT (1 << 11)
#define XHCI_INTEL_HOST (1 << 12) #define XHCI_INTEL_HOST (1 << 12)
#define XHCI_SPURIOUS_REBOOT (1 << 13)
unsigned int num_active_eps; unsigned int num_active_eps;
unsigned int limit_active_eps; unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */ /* There are two roothubs to keep track of bus suspend info for */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment