Commit 3590b44b authored by Dave Airlie's avatar Dave Airlie

Merge tag 'drm-misc-fixes-2022-07-07-1' of...

Merge tag 'drm-misc-fixes-2022-07-07-1' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes

Three mode setting fixes for fsl-ldb, a fbdev removal use-after-free fix,
a dma-buf fence use-after-free fix, a DMA setup fix for rockchip, an error
path fix and memory corruption fix for panfrost and one more orientation
quirk
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708054306.wr6jcfdunuypftbq@houat
parents 42e0a872 b68277f1
......@@ -343,7 +343,7 @@ void dma_resv_replace_fences(struct dma_resv *obj, uint64_t context,
if (old->context != context)
continue;
dma_resv_list_set(list, i, replacement, usage);
dma_resv_list_set(list, i, dma_fence_get(replacement), usage);
dma_fence_put(old);
}
}
......
......@@ -74,22 +74,6 @@ static int fsl_ldb_attach(struct drm_bridge *bridge,
bridge, flags);
}
static int fsl_ldb_atomic_check(struct drm_bridge *bridge,
struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
/* Invert DE signal polarity. */
bridge_state->input_bus_cfg.flags &= ~(DRM_BUS_FLAG_DE_LOW |
DRM_BUS_FLAG_DE_HIGH);
if (bridge_state->output_bus_cfg.flags & DRM_BUS_FLAG_DE_LOW)
bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_HIGH;
else if (bridge_state->output_bus_cfg.flags & DRM_BUS_FLAG_DE_HIGH)
bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_LOW;
return 0;
}
static void fsl_ldb_atomic_enable(struct drm_bridge *bridge,
struct drm_bridge_state *old_bridge_state)
{
......@@ -153,7 +137,7 @@ static void fsl_ldb_atomic_enable(struct drm_bridge *bridge,
reg = LDB_CTRL_CH0_ENABLE;
if (fsl_ldb->lvds_dual_link)
reg |= LDB_CTRL_CH1_ENABLE;
reg |= LDB_CTRL_CH1_ENABLE | LDB_CTRL_SPLIT_MODE;
if (lvds_format_24bpp) {
reg |= LDB_CTRL_CH0_DATA_WIDTH;
......@@ -233,7 +217,7 @@ fsl_ldb_mode_valid(struct drm_bridge *bridge,
{
struct fsl_ldb *fsl_ldb = to_fsl_ldb(bridge);
if (mode->clock > (fsl_ldb->lvds_dual_link ? 80000 : 160000))
if (mode->clock > (fsl_ldb->lvds_dual_link ? 160000 : 80000))
return MODE_CLOCK_HIGH;
return MODE_OK;
......@@ -241,7 +225,6 @@ fsl_ldb_mode_valid(struct drm_bridge *bridge,
static const struct drm_bridge_funcs funcs = {
.attach = fsl_ldb_attach,
.atomic_check = fsl_ldb_atomic_check,
.atomic_enable = fsl_ldb_atomic_enable,
.atomic_disable = fsl_ldb_atomic_disable,
.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
......
......@@ -286,6 +286,21 @@ static const struct dmi_system_id orientation_data[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
},
.driver_data = (void *)&lcd1200x1920_rightside_up,
}, { /* Lenovo Yoga Tablet 2 830F / 830L */
.matches = {
/*
* Note this also matches the Lenovo Yoga Tablet 2 1050F/L
* since that uses the same mainboard. The resolution match
* will limit this to only matching on the 830F/L. Neither has
* any external video outputs so those are not a concern.
*/
DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."),
DMI_MATCH(DMI_PRODUCT_NAME, "VALLEYVIEW C0 PLATFORM"),
DMI_MATCH(DMI_BOARD_NAME, "BYT-T FFD8"),
/* Partial match on beginning of BIOS version */
DMI_MATCH(DMI_BIOS_VERSION, "BLADE_21"),
},
.driver_data = (void *)&lcd1200x1920_rightside_up,
}, { /* OneGX1 Pro */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "SYSTEM_MANUFACTURER"),
......
......@@ -433,7 +433,7 @@ static int panfrost_ioctl_madvise(struct drm_device *dev, void *data,
if (args->retained) {
if (args->madv == PANFROST_MADV_DONTNEED)
list_add_tail(&bo->base.madv_list,
list_move_tail(&bo->base.madv_list,
&pfdev->shrinker_list);
else if (args->madv == PANFROST_MADV_WILLNEED)
list_del_init(&bo->base.madv_list);
......
......@@ -518,7 +518,7 @@ static int panfrost_mmu_map_fault_addr(struct panfrost_device *pfdev, int as,
err_pages:
drm_gem_shmem_put_pages(&bo->base);
err_bo:
drm_gem_object_put(&bo->base.base);
panfrost_gem_mapping_put(bomapping);
return ret;
}
......
......@@ -23,6 +23,14 @@
#include <drm/drm_probe_helper.h>
#include <drm/drm_vblank.h>
#if defined(CONFIG_ARM_DMA_USE_IOMMU)
#include <asm/dma-iommu.h>
#else
#define arm_iommu_detach_device(...) ({ })
#define arm_iommu_release_mapping(...) ({ })
#define to_dma_iommu_mapping(dev) NULL
#endif
#include "rockchip_drm_drv.h"
#include "rockchip_drm_fb.h"
#include "rockchip_drm_gem.h"
......@@ -49,6 +57,15 @@ int rockchip_drm_dma_attach_device(struct drm_device *drm_dev,
if (!private->domain)
return 0;
if (IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)) {
struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
if (mapping) {
arm_iommu_detach_device(dev);
arm_iommu_release_mapping(mapping);
}
}
ret = iommu_attach_device(private->domain, dev);
if (ret) {
DRM_DEV_ERROR(dev, "Failed to attach iommu device\n");
......
......@@ -350,7 +350,7 @@ static int ssd130x_init(struct ssd130x_device *ssd130x)
/* Set precharge period in number of ticks from the internal clock */
precharge = (SSD130X_SET_PRECHARGE_PERIOD1_SET(ssd130x->prechargep1) |
SSD130X_SET_PRECHARGE_PERIOD1_SET(ssd130x->prechargep2));
SSD130X_SET_PRECHARGE_PERIOD2_SET(ssd130x->prechargep2));
ret = ssd130x_write_cmd(ssd130x, 2, SSD130X_SET_PRECHARGE_PERIOD, precharge);
if (ret < 0)
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment