Merge tag 'drm-misc-fixes-2022-07-07-1' of...

Merge tag 'drm-misc-fixes-2022-07-07-1' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes

Three mode setting fixes for fsl-ldb, a fbdev removal use-after-free fix,
a dma-buf fence use-after-free fix, a DMA setup fix for rockchip, an error
path fix and memory corruption fix for panfrost and one more orientation
quirk
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708054306.wr6jcfdunuypftbq@houat

drivers/dma-buf/dma-resv.c

@@ -343,7 +343,7 @@ void dma_resv_replace_fences(struct dma_resv *obj, uint64_t context,
 		if (old->context != context)
 			continue;
 
-		dma_resv_list_set(list, i, replacement, usage);
+		dma_resv_list_set(list, i, dma_fence_get(replacement), usage);
 		dma_fence_put(old);
 	}
 }

drivers/gpu/drm/bridge/fsl-ldb.c

@@ -74,22 +74,6 @@ static int fsl_ldb_attach(struct drm_bridge *bridge,
 				 bridge, flags);
 }
 
-static int fsl_ldb_atomic_check(struct drm_bridge *bridge,
-				struct drm_bridge_state *bridge_state,
-				struct drm_crtc_state *crtc_state,
-				struct drm_connector_state *conn_state)
-{
-	/* Invert DE signal polarity. */
-	bridge_state->input_bus_cfg.flags &= ~(DRM_BUS_FLAG_DE_LOW |
-					       DRM_BUS_FLAG_DE_HIGH);
-	if (bridge_state->output_bus_cfg.flags & DRM_BUS_FLAG_DE_LOW)
-		bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_HIGH;
-	else if (bridge_state->output_bus_cfg.flags & DRM_BUS_FLAG_DE_HIGH)
-		bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_LOW;
-
-	return 0;
-}
-
 static void fsl_ldb_atomic_enable(struct drm_bridge *bridge,
 				  struct drm_bridge_state *old_bridge_state)
 {
@@ -153,7 +137,7 @@ static void fsl_ldb_atomic_enable(struct drm_bridge *bridge,
 	reg = LDB_CTRL_CH0_ENABLE;
 
 	if (fsl_ldb->lvds_dual_link)
-		reg |= LDB_CTRL_CH1_ENABLE;
+		reg |= LDB_CTRL_CH1_ENABLE | LDB_CTRL_SPLIT_MODE;
 
 	if (lvds_format_24bpp) {
 		reg |= LDB_CTRL_CH0_DATA_WIDTH;
@@ -233,7 +217,7 @@ fsl_ldb_mode_valid(struct drm_bridge *bridge,
 {
 	struct fsl_ldb *fsl_ldb = to_fsl_ldb(bridge);
 
-	if (mode->clock > (fsl_ldb->lvds_dual_link ? 80000 : 160000))
+	if (mode->clock > (fsl_ldb->lvds_dual_link ? 160000 : 80000))
 		return MODE_CLOCK_HIGH;
 
 	return MODE_OK;
@@ -241,7 +225,6 @@ fsl_ldb_mode_valid(struct drm_bridge *bridge,
 
 static const struct drm_bridge_funcs funcs = {
 	.attach = fsl_ldb_attach,
-	.atomic_check = fsl_ldb_atomic_check,
 	.atomic_enable = fsl_ldb_atomic_enable,
 	.atomic_disable = fsl_ldb_atomic_disable,
 	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,

drivers/gpu/drm/drm_panel_orientation_quirks.c

@@ -286,6 +286,21 @@ static const struct dmi_system_id orientation_data[] = {
 		  DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
 		},
 		.driver_data = (void *)&lcd1200x1920_rightside_up,
+	}, {	/* Lenovo Yoga Tablet 2 830F / 830L */
+		.matches = {
+		 /*
+		  * Note this also matches the Lenovo Yoga Tablet 2 1050F/L
+		  * since that uses the same mainboard. The resolution match
+		  * will limit this to only matching on the 830F/L. Neither has
+		  * any external video outputs so those are not a concern.
+		  */
+		 DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."),
+		 DMI_MATCH(DMI_PRODUCT_NAME, "VALLEYVIEW C0 PLATFORM"),
+		 DMI_MATCH(DMI_BOARD_NAME, "BYT-T FFD8"),
+		 /* Partial match on beginning of BIOS version */
+		 DMI_MATCH(DMI_BIOS_VERSION, "BLADE_21"),
+		},
+		.driver_data = (void *)&lcd1200x1920_rightside_up,
 	}, {	/* OneGX1 Pro */
 		.matches = {
 		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "SYSTEM_MANUFACTURER"),

drivers/gpu/drm/panfrost/panfrost_drv.c

@@ -433,8 +433,8 @@ static int panfrost_ioctl_madvise(struct drm_device *dev, void *data,
 
 	if (args->retained) {
 		if (args->madv == PANFROST_MADV_DONTNEED)
-			list_add_tail(&bo->base.madv_list,
-				      &pfdev->shrinker_list);
+			list_move_tail(&bo->base.madv_list,
+				       &pfdev->shrinker_list);
 		else if (args->madv == PANFROST_MADV_WILLNEED)
 			list_del_init(&bo->base.madv_list);
 	}

drivers/gpu/drm/panfrost/panfrost_mmu.c

@@ -518,7 +518,7 @@ static int panfrost_mmu_map_fault_addr(struct panfrost_device *pfdev, int as,
 err_pages:
 	drm_gem_shmem_put_pages(&bo->base);
 err_bo:
-	drm_gem_object_put(&bo->base.base);
+	panfrost_gem_mapping_put(bomapping);
 	return ret;
 }
 

drivers/gpu/drm/rockchip/rockchip_drm_drv.c

@@ -23,6 +23,14 @@
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_vblank.h>
 
+#if defined(CONFIG_ARM_DMA_USE_IOMMU)
+#include <asm/dma-iommu.h>
+#else
+#define arm_iommu_detach_device(...)	({ })
+#define arm_iommu_release_mapping(...)	({ })
+#define to_dma_iommu_mapping(dev) NULL
+#endif
+
 #include "rockchip_drm_drv.h"
 #include "rockchip_drm_fb.h"
 #include "rockchip_drm_gem.h"
@@ -49,6 +57,15 @@ int rockchip_drm_dma_attach_device(struct drm_device *drm_dev,
 	if (!private->domain)
 		return 0;
 
+	if (IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)) {
+		struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
+
+		if (mapping) {
+			arm_iommu_detach_device(dev);
+			arm_iommu_release_mapping(mapping);
+		}
+	}
+
 	ret = iommu_attach_device(private->domain, dev);
 	if (ret) {
 		DRM_DEV_ERROR(dev, "Failed to attach iommu device\n");

drivers/gpu/drm/solomon/ssd130x.c

@@ -350,7 +350,7 @@ static int ssd130x_init(struct ssd130x_device *ssd130x)
 
 	/* Set precharge period in number of ticks from the internal clock */
 	precharge = (SSD130X_SET_PRECHARGE_PERIOD1_SET(ssd130x->prechargep1) |
-		     SSD130X_SET_PRECHARGE_PERIOD1_SET(ssd130x->prechargep2));
+		     SSD130X_SET_PRECHARGE_PERIOD2_SET(ssd130x->prechargep2));
 	ret = ssd130x_write_cmd(ssd130x, 2, SSD130X_SET_PRECHARGE_PERIOD, precharge);
 	if (ret < 0)
 		return ret;