Commit 35eb8f7b authored by Jouni Malinen's avatar Jouni Malinen Committed by Johannes Berg

cfg80211: Improve Connect/Associate command documentation

The roaming cases for the Connect command were not fully covered and
neither Connect nor Associate command uses of the prev_bssid parameter
were very clear. Add details to describe how the prev_bssid argument is
supposed to be used and when the driver should use association or
reassociation.
Signed-off-by: default avatarJouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent bddf5904
......@@ -1750,7 +1750,12 @@ enum cfg80211_assoc_req_flags {
* @ie_len: Length of ie buffer in octets
* @use_mfp: Use management frame protection (IEEE 802.11w) in this association
* @crypto: crypto settings
* @prev_bssid: previous BSSID, if not %NULL use reassociate frame
* @prev_bssid: previous BSSID, if not %NULL use reassociate frame. This is used
* to indicate a request to reassociate within the ESS instead of a request
* do the initial association with the ESS. When included, this is set to
* the BSSID of the current association, i.e., to the value that is
* included in the Current AP address field of the Reassociation Request
* frame.
* @flags: See &enum cfg80211_assoc_req_flags
* @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask
* will be used in ht_capa. Un-supported values will be ignored.
......@@ -1925,7 +1930,12 @@ struct cfg80211_bss_selection {
* @pbss: if set, connect to a PCP instead of AP. Valid for DMG
* networks.
* @bss_select: criteria to be used for BSS selection.
* @prev_bssid: previous BSSID, if not %NULL use reassociate frame
* @prev_bssid: previous BSSID, if not %NULL use reassociate frame. This is used
* to indicate a request to reassociate within the ESS instead of a request
* do the initial association with the ESS. When included, this is set to
* the BSSID of the current association, i.e., to the value that is
* included in the Current AP address field of the Reassociation Request
* frame.
*/
struct cfg80211_connect_params {
struct ieee80211_channel *channel;
......@@ -2377,7 +2387,17 @@ struct cfg80211_qos_map {
* @connect: Connect to the ESS with the specified parameters. When connected,
* call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS.
* If the connection fails for some reason, call cfg80211_connect_result()
* with the status from the AP.
* with the status from the AP. The driver is allowed to roam to other
* BSSes within the ESS when the other BSS matches the connect parameters.
* When such roaming is initiated by the driver, the driver is expected to
* verify that the target matches the configured security parameters and
* to use Reassociation Request frame instead of Association Request frame.
* The connect function can also be used to request the driver to perform
* a specific roam when connected to an ESS. In that case, the prev_bssid
* parameter is set to the BSSID of the currently associated BSS as an
* indication of requesting reassociation. In both the driver-initiated and
* new connect() call initiated roaming cases, the result of roaming is
* indicated with a call to cfg80211_roamed() or cfg80211_roamed_bss().
* (invoked with the wireless_dev mutex held)
* @disconnect: Disconnect from the BSS/ESS.
* (invoked with the wireless_dev mutex held)
......
......@@ -429,7 +429,11 @@
* @NL80211_CMD_ASSOCIATE: association request and notification; like
* NL80211_CMD_AUTHENTICATE but for Association and Reassociation
* (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
* MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
* MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The
* %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
* request is for the initial association to an ESS (that attribute not
* included) or for reassociation within the ESS (that attribute is
* included).
* @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
* NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
* MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
......@@ -479,6 +483,9 @@
* set of BSSID,frequency parameters is used (i.e., either the enforcing
* %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
* %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
* %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
* the ESS in case the device is already associated and an association with
* a different BSS is desired.
* Background scan period can optionally be
* specified in %NL80211_ATTR_BG_SCAN_PERIOD,
* if not specified default background scan configuration
......@@ -1287,8 +1294,11 @@ enum nl80211_commands {
* @NL80211_ATTR_RESP_IE: (Re)association response information elements as
* sent by peer, for ROAM and successful CONNECT events.
*
* @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
* commands to specify using a reassociate frame
* @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT
* commands to specify a request to reassociate within an ESS, i.e., to use
* Reassociate Request frame (with the value of this attribute in the
* Current AP address field) instead of Association Request frame which is
* used for the initial association to an ESS.
*
* @NL80211_ATTR_KEY: key information in a nested attribute with
* %NL80211_KEY_* sub-attributes
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment