Commit 35ee52be authored by Oleg Ivanov's avatar Oleg Ivanov Committed by Kevin Hilman

ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus

The Tronsmart MXIII Plus is an Android TV box which uses the Amlogic
S812 (Meson8m2) SoC. It uses a Realtek RTL8211F RGMII Ethernet PHY as
well as a Ricoh RN5T618 system power controller. It also comes with an
Ampak AP6330 SDIO wifi/Bluetooth combo chip (support for wifi and
Bluetooth is currently not added because the Linux drivers currently
only support one MMC controller and that is used for the SD card).
Signed-off-by: default avatarOleg Ivanov <balbes-150@yandex.ru>
Signed-off-by: default avatarMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: default avatarKevin Hilman <khilman@baylibre.com>
parent e981e459
...@@ -312,7 +312,8 @@ dtb-$(CONFIG_ARCH_NPCM7XX) += \ ...@@ -312,7 +312,8 @@ dtb-$(CONFIG_ARCH_NPCM7XX) += \
dtb-$(CONFIG_MACH_MESON6) += \ dtb-$(CONFIG_MACH_MESON6) += \
meson6-atv1200.dtb meson6-atv1200.dtb
dtb-$(CONFIG_MACH_MESON8) += \ dtb-$(CONFIG_MACH_MESON8) += \
meson8-minix-neo-x8.dtb meson8-minix-neo-x8.dtb \
meson8m2-mxiii-plus.dtb
dtb-$(CONFIG_ARCH_MMP) += \ dtb-$(CONFIG_ARCH_MMP) += \
pxa168-aspenite.dtb \ pxa168-aspenite.dtb \
pxa910-dkb.dtb \ pxa910-dkb.dtb \
......
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Oleg Ivanov <balbes-150@yandex.ru>
* Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*/
/dts-v1/;
#include "meson8m2.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Tronsmart MXIII Plus";
compatible = "tronsmart,mxiii-plus", "amlogic,meson8m2";
aliases {
ethernet0 = &ethmac;
i2c0 = &i2c_AO;
serial0 = &uart_AO;
serial1 = &uart_A;
mmc0 = &sd_card_slot;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
reg = <0x40000000 0x80000000>;
};
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1710000>;
button-function {
label = "Function";
linux,code = <KEY_FN>;
press-threshold-microvolt = <10000>;
};
};
vcc_3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&cpu0 {
cpu-supply = <&vcck>;
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
phy-handle = <&eth_phy0>;
phy-mode = "rgmii";
amlogic,tx-delay-ns = <4>;
snps,reset-gpio = <&gpio GPIOH_4 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
};
};
};
&ir_receiver {
status = "okay";
pinctrl-0 = <&ir_recv_pins>;
pinctrl-names = "default";
};
&i2c_AO {
status = "okay";
pinctrl-0 = <&i2c_ao_pins>;
pinctrl-names = "default";
pmic@32 {
compatible = "ricoh,rn5t618";
reg = <0x32>;
system-power-controller;
regulators {
vcck: DCDC1 {
regulator-name = "VCCK";
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
DCDC2 {
regulator-name = "VDDAO";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
DCDC3 {
regulator-name = "VDD_DDR";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
LDO1 {
regulator-name = "VDDIO_AO28";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
regulator-always-on;
};
vddio_ao1v8: LDO2 {
regulator-name = "VDDIO_AO18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
LDO3 {
regulator-name = "VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
LDO4 {
regulator-name = "VCC2V8";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-boot-on;
regulator-always-on;
};
LDO5 {
regulator-name = "AVDD1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
LDORTC1 {
regulator-name = "VDD_LDO";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
regulator-boot-on;
regulator-always-on;
};
LDORTC2 {
regulator-name = "RTC_0V9";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
&saradc {
status = "okay";
vref-supply = <&vddio_ao1v8>;
};
&sdio {
status = "okay";
pinctrl-0 = <&sd_b_pins>;
pinctrl-names = "default";
/* SD card */
sd_card_slot: slot@1 {
compatible = "mmc-slot";
reg = <1>;
status = "okay";
bus-width = <4>;
no-sdio;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vcc_3v3>;
};
};
/* connected to the Bluetooth module */
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
&usb0_phy {
status = "okay";
};
&usb1_phy {
status = "okay";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment