Commit 35eecd10 authored by Felix Fietkau's avatar Felix Fietkau Committed by Florian Fainelli

ARM: BCM5301X: Add DT for Buffalo WXR-1900DHP

Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
parent 35ad0e50
...@@ -63,6 +63,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ ...@@ -63,6 +63,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47081-asus-rt-n18u.dtb \ bcm47081-asus-rt-n18u.dtb \
bcm47081-buffalo-wzr-600dhp2.dtb \ bcm47081-buffalo-wzr-600dhp2.dtb \
bcm47081-buffalo-wzr-900dhp.dtb \ bcm47081-buffalo-wzr-900dhp.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r8000.dtb bcm4709-netgear-r8000.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \ dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb bcm963138dvt.dtb
......
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Buffalo WXR-1900DHP
*
* Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
/dts-v1/;
#include "bcm4708.dtsi"
/ {
compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708";
model = "Buffalo WXR-1900DHP";
chosen {
bootargs = "console=ttyS0,115200";
};
memory {
reg = <0x00000000 0x08000000>;
};
leds {
compatible = "gpio-leds";
usb {
label = "bcm53xx:green:usb";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
power-white {
label = "bcm53xx:white:power";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
router-amber {
label = "bcm53xx:amber:router";
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
router-white {
label = "bcm53xx:white:router";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
wan-white {
label = "bcm53xx:white:wan";
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
wireless-amber {
label = "bcm53xx:amber:wireless";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
wireless-white {
label = "bcm53xx:white:wireless";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
power {
label = "Power";
linux,code = <KEY_POWER>;
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
};
restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
};
aoss {
label = "AOSS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
};
/* Commit mode set by switch? */
mode {
label = "Mode";
linux,code = <KEY_SETUP>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
};
/* Switch: AP mode */
sw_ap {
label = "AP";
linux,code = <BTN_0>;
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
};
eject {
label = "USB eject";
linux,code = <KEY_EJECTCD>;
gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment