scsi: arm64: dts: add ufs dts node

arm64: dts: add ufs node for Hisilicon.
Signed-off-by: Li Wei <liwei213@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

arch/arm64/boot/dts/hisilicon/hi3660.dtsi

@@ -1000,6 +1000,24 @@ &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
 			reset-gpios = <&gpio11 1 0 >;
 		};
 
+		/* UFS */
+		ufs: ufs@ff3b0000 {
+			compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+			/* 0: HCI standard */
+			/* 1: UFS SYS CTRL */
+			reg = <0x0 0xff3b0000 0x0 0x1000>,
+				<0x0 0xff3b1000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+				<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+			clock-names = "ref_clk", "phy_clk";
+			freq-table-hz = <0 0>, <0 0>;
+			/* offset: 0x84; bit: 12 */
+			resets = <&crg_rst 0x84 12>;
+			reset-names = "rst";
+		};
+
 		/* SD */
 		dwmmc1: dwmmc1@ff37f000 {
 			#address-cells = <1>;