MIPS: Netlogic: Move device-trees to arch/mips/boot/dts/

Move the Netlogic XLP device-trees to arch/mips/boot/dts/ and update the
Makefiles accordingly.  A built-in device-tree is optional, so select
BUILTIN_DTB when it is requested.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Jayachandran C <jchandra@broadcom.com>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7560/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/boot/dts/Makefile

 dtb-$(CONFIG_CAVIUM_OCTEON_SOC)		+= octeon_3xxx.dtb octeon_68xx.dtb
 dtb-$(CONFIG_DT_EASY50712)		+= easy50712.dtb
+dtb-$(CONFIG_DT_XLP_EVP)		+= xlp_evp.dtb
+dtb-$(CONFIG_DT_XLP_SVP)		+= xlp_svp.dtb
+dtb-$(CONFIG_DT_XLP_FVP)		+= xlp_fvp.dtb
+dtb-$(CONFIG_DT_XLP_GVP)		+= xlp_gvp.dtb
 dtb-$(CONFIG_MIPS_SEAD3)		+= sead3.dtb
 
 obj-y		+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))

arch/mips/netlogic/Kconfig

@@ -4,6 +4,7 @@ if NLM_XLP_BOARD
 config DT_XLP_EVP
 	bool "Built-in device tree for XLP EVP boards"
 	default y
+	select BUILTIN_DTB
 	help
 	  Add an FDT blob for XLP EVP boards into the kernel.
 	  This DTB will be used if the firmware does not pass in a DTB
@@ -13,6 +14,7 @@ config DT_XLP_EVP
 config DT_XLP_SVP
 	bool "Built-in device tree for XLP SVP boards"
 	default y
+	select BUILTIN_DTB
 	help
 	  Add an FDT blob for XLP VP boards into the kernel.
 	  This DTB will be used if the firmware does not pass in a DTB
@@ -22,6 +24,7 @@ config DT_XLP_SVP
 config DT_XLP_FVP
 	bool "Built-in device tree for XLP FVP boards"
 	default y
+	select BUILTIN_DTB
 	help
 	  Add an FDT blob for XLP FVP board into the kernel.
 	  This DTB will be used if the firmware does not pass in a DTB
@@ -31,6 +34,7 @@ config DT_XLP_FVP
 config DT_XLP_GVP
 	bool "Built-in device tree for XLP GVP boards"
 	default y
+	select BUILTIN_DTB
 	help
 	  Add an FDT blob for XLP GVP board into the kernel.
 	  This DTB will be used if the firmware does not pass in a DTB

arch/mips/netlogic/Makefile

 obj-$(CONFIG_NLM_COMMON)	+=	common/
 obj-$(CONFIG_CPU_XLR)		+=	xlr/
 obj-$(CONFIG_CPU_XLP)		+=	xlp/
-obj-$(CONFIG_CPU_XLP)		+=	dts/

arch/mips/netlogic/dts/Makefile

-obj-$(CONFIG_DT_XLP_EVP) := xlp_evp.dtb.o
-obj-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb.o
-obj-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb.o
-obj-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb.o