usb: typec: fusb302: Fix masking of comparator and bc_lvl interrupts

The code that enables either BC_LVL or COMP_CHNG interrupt in tcpm_set_cc
wrongly assumes that the interrupt is unmasked by writing 1 to the apropriate
bit in the mask register. In fact, interrupts are enabled when the mask
is 0, so the tcpm_set_cc enables interrupt for COMP_CHNG when it expects
BC_LVL interrupt to be enabled.

This causes inability of the driver to recognize cable unplug events
in host mode (unplug is recognized only via a COMP_CHNG interrupt).

In device mode this bug was masked by simultaneous triggering of the VBUS
change interrupt, because of loss of VBUS when the port peer is providing
power.

Fixes: 48242e30 ("usb: typec: fusb302: Revert "Resolve fixed power role contract setup"")
Cc: stable <stable@vger.kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Link: https://lore.kernel.org/r/20211108102833.2793803-1-megous@megous.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/typec/tcpm/fusb302.c

@@ -669,25 +669,27 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
 					     FUSB_REG_MASK_BC_LVL |
 					     FUSB_REG_MASK_COMP_CHNG,
-					     FUSB_REG_MASK_COMP_CHNG);
+					     FUSB_REG_MASK_BC_LVL);
 		if (ret < 0) {
 			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
 				    ret);
 			goto done;
 		}
 		chip->intr_comp_chng = true;
+		chip->intr_bc_lvl = false;
 		break;
 	case TYPEC_CC_RD:
 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
 					     FUSB_REG_MASK_BC_LVL |
 					     FUSB_REG_MASK_COMP_CHNG,
-					     FUSB_REG_MASK_BC_LVL);
+					     FUSB_REG_MASK_COMP_CHNG);
 		if (ret < 0) {
 			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
 				    ret);
 			goto done;
 		}
 		chip->intr_bc_lvl = true;
+		chip->intr_comp_chng = false;
 		break;
 	default:
 		break;