mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz

O2 SD Host HS200 mode clock frequency current is 208MHz, should be changed
to 200MHz to meet specification.
Signed-off-by: ernest.zhang <ernest.zhang@bayhubtech.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/sdhci-pci-o2micro.c

@@ -311,9 +311,8 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 
 			/* Check Whether subId is 0x11 or 0x12 */
 			if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
-				scratch_32 = 0x2c280000;
+				scratch_32 = 0x25100000;
 
-				/* Set Base Clock to 208MZ */
 				o2_pci_set_baseclk(chip, scratch_32);
 				ret = pci_read_config_dword(chip->pdev,
 							    O2_SD_FUNC_REG4,
@@ -406,7 +405,7 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 					       O2_SD_PLL_SETTING, scratch_32);
 		} else {
 			scratch_32 &= 0x0000FFFF;
-			scratch_32 |= 0x2c280000;
+			scratch_32 |= 0x25100000;
 
 			pci_write_config_dword(chip->pdev,
 					       O2_SD_PLL_SETTING, scratch_32);