Commit 366a3270 authored by Tiberiu Breana's avatar Tiberiu Breana Committed by Jonathan Cameron

iio: humidity: Add support for AM2315

Add basic support for the Aosong AM2315 relative humidity
and ambient temperature sensor.
Includes support for raw readings and ACPI detection.

Datasheet:
http://www.aosong.com/asp_bin/Products/en/AM2315.pdfSigned-off-by: default avatarTiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent d8469e93
...@@ -3,6 +3,16 @@ ...@@ -3,6 +3,16 @@
# #
menu "Humidity sensors" menu "Humidity sensors"
config AM2315
tristate "Aosong AM2315 relative humidity and temperature sensor"
depends on I2C
help
If you say yes here you get support for the Aosong AM2315
relative humidity and ambient temperature sensor.
This driver can also be built as a module. If so, the module will
be called am2315.
config DHT11 config DHT11
tristate "DHT11 (and compatible sensors) driver" tristate "DHT11 (and compatible sensors) driver"
depends on GPIOLIB || COMPILE_TEST depends on GPIOLIB || COMPILE_TEST
......
...@@ -2,6 +2,7 @@ ...@@ -2,6 +2,7 @@
# Makefile for IIO humidity sensor drivers # Makefile for IIO humidity sensor drivers
# #
obj-$(CONFIG_AM2315) += am2315.o
obj-$(CONFIG_DHT11) += dht11.o obj-$(CONFIG_DHT11) += dht11.o
obj-$(CONFIG_HDC100X) += hdc100x.o obj-$(CONFIG_HDC100X) += hdc100x.o
obj-$(CONFIG_HTU21) += htu21.o obj-$(CONFIG_HTU21) += htu21.o
......
/**
* Aosong AM2315 relative humidity and temperature
*
* Copyright (c) 2016, Intel Corporation.
*
* This file is subject to the terms and conditions of version 2 of
* the GNU General Public License. See the file COPYING in the main
* directory of this archive for more details.
*
* 7-bit I2C address: 0x5C.
*/
#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#define AM2315_REG_HUM_MSB 0x00
#define AM2315_REG_HUM_LSB 0x01
#define AM2315_REG_TEMP_MSB 0x02
#define AM2315_REG_TEMP_LSB 0x03
#define AM2315_FUNCTION_READ 0x03
#define AM2315_HUM_OFFSET 2
#define AM2315_TEMP_OFFSET 4
#define AM2315_DRIVER_NAME "am2315"
struct am2315_data {
struct i2c_client *client;
struct mutex lock;
};
struct am2315_sensor_data {
s16 hum_data;
s16 temp_data;
};
static const struct iio_chan_spec am2315_channels[] = {
{
.type = IIO_HUMIDITYRELATIVE,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE)
},
{
.type = IIO_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE)
},
};
/* CRC calculation algorithm, as specified in the datasheet (page 13). */
static u16 am2315_crc(u8 *data, u8 nr_bytes)
{
int i;
u16 crc = 0xffff;
while (nr_bytes--) {
crc ^= *data++;
for (i = 0; i < 8; i++) {
if (crc & 0x01) {
crc >>= 1;
crc ^= 0xA001;
} else {
crc >>= 1;
}
}
}
return crc;
}
/* Simple function that sends a few bytes to the device to wake it up. */
static void am2315_ping(struct i2c_client *client)
{
i2c_smbus_read_byte_data(client, AM2315_REG_HUM_MSB);
}
static int am2315_read_data(struct am2315_data *data,
struct am2315_sensor_data *sensor_data)
{
int ret;
/* tx_buf format: <function code> <start addr> <nr of regs to read> */
u8 tx_buf[3] = { AM2315_FUNCTION_READ, AM2315_REG_HUM_MSB, 4 };
/*
* rx_buf format:
* <function code> <number of registers read>
* <humidity MSB> <humidity LSB> <temp MSB> <temp LSB>
* <CRC LSB> <CRC MSB>
*/
u8 rx_buf[8];
u16 crc;
/* First wake up the device. */
am2315_ping(data->client);
mutex_lock(&data->lock);
ret = i2c_master_send(data->client, tx_buf, sizeof(tx_buf));
if (ret < 0) {
dev_err(&data->client->dev, "failed to send read request\n");
goto exit_unlock;
}
/* Wait 2-3 ms, then read back the data sent by the device. */
usleep_range(2000, 3000);
/* Do a bulk data read, then pick out what we need. */
ret = i2c_master_recv(data->client, rx_buf, sizeof(rx_buf));
if (ret < 0) {
dev_err(&data->client->dev, "failed to read sensor data\n");
goto exit_unlock;
}
mutex_unlock(&data->lock);
/*
* Do a CRC check on the data and compare it to the value
* calculated by the device.
*/
crc = am2315_crc(rx_buf, sizeof(rx_buf) - 2);
if ((crc & 0xff) != rx_buf[6] || (crc >> 8) != rx_buf[7]) {
dev_err(&data->client->dev, "failed to verify sensor data\n");
return -EIO;
}
sensor_data->hum_data = (rx_buf[AM2315_HUM_OFFSET] << 8) |
rx_buf[AM2315_HUM_OFFSET + 1];
sensor_data->temp_data = (rx_buf[AM2315_TEMP_OFFSET] << 8) |
rx_buf[AM2315_TEMP_OFFSET + 1];
return ret;
exit_unlock:
mutex_unlock(&data->lock);
return ret;
}
static int am2315_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
int ret;
struct am2315_sensor_data sensor_data;
struct am2315_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = am2315_read_data(data, &sensor_data);
if (ret < 0)
return ret;
*val = (chan->type == IIO_HUMIDITYRELATIVE) ?
sensor_data.hum_data : sensor_data.temp_data;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 100;
return IIO_VAL_INT;
}
return -EINVAL;
}
static const struct iio_info am2315_info = {
.driver_module = THIS_MODULE,
.read_raw = am2315_read_raw,
};
static int am2315_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct iio_dev *indio_dev;
struct am2315_data *data;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev) {
dev_err(&client->dev, "iio allocation failed!\n");
return -ENOMEM;
}
data = iio_priv(indio_dev);
data->client = client;
i2c_set_clientdata(client, indio_dev);
mutex_init(&data->lock);
indio_dev->dev.parent = &client->dev;
indio_dev->info = &am2315_info;
indio_dev->name = AM2315_DRIVER_NAME;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = am2315_channels;
indio_dev->num_channels = ARRAY_SIZE(am2315_channels);
return iio_device_register(indio_dev);
}
static int am2315_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
iio_device_unregister(indio_dev);
return 0;
}
static const struct i2c_device_id am2315_i2c_id[] = {
{"am2315", 0},
{}
};
static const struct acpi_device_id am2315_acpi_id[] = {
{"AOS2315", 0},
{}
};
MODULE_DEVICE_TABLE(acpi, am2315_acpi_id);
static struct i2c_driver am2315_driver = {
.driver = {
.name = "am2315",
.acpi_match_table = ACPI_PTR(am2315_acpi_id),
},
.probe = am2315_probe,
.remove = am2315_remove,
.id_table = am2315_i2c_id,
};
module_i2c_driver(am2315_driver);
MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@intel.com>");
MODULE_DESCRIPTION("Aosong AM2315 relative humidity and temperature");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment