Commit 3672bc70 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven

Revert "pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit30 when using SSI_SCK2 and SSI_WS2"

This reverts commit e87882eb.

According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of Aug
24, 2018, the SEL_SSI2_{0,1} definition was to be deleted.  However,
this errata merely fixed an accidental double definition in the Hardware
User's Manual Rev. 1.00.  The real definition is still present in later
revisions of the manual (Rev. 1.50 and Rev. 2.00).

Hence revert the commit to recover the definition.

Based on a patch in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: default avatarSimon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190904121658.2617-3-geert+renesas@glider.be
parent 05f841d2
......@@ -448,6 +448,7 @@ FM(IP12_31_28) IP12_31_28 FM(IP13_31_28) IP13_31_28 FM(IP14_31_28) IP14_31_28 FM
#define MOD_SEL0_1_0 REV4(FM(SEL_SPEED_PULSE_IF_0), FM(SEL_SPEED_PULSE_IF_1), FM(SEL_SPEED_PULSE_IF_2), F_(0, 0))
/* MOD_SEL1 */ /* 0 */ /* 1 */ /* 2 */ /* 3 */ /* 4 */ /* 5 */ /* 6 */ /* 7 */
#define MOD_SEL1_30 FM(SEL_SSI2_0) FM(SEL_SSI2_1)
#define MOD_SEL1_29 FM(SEL_TIMER_TMU_0) FM(SEL_TIMER_TMU_1)
#define MOD_SEL1_28 FM(SEL_USB_20_CH0_0) FM(SEL_USB_20_CH0_1)
#define MOD_SEL1_26 FM(SEL_DRIF2_0) FM(SEL_DRIF2_1)
......@@ -468,7 +469,7 @@ FM(IP12_31_28) IP12_31_28 FM(IP13_31_28) IP13_31_28 FM(IP14_31_28) IP14_31_28 FM
#define PINMUX_MOD_SELS \
\
MOD_SEL0_30_29 \
MOD_SEL0_30_29 MOD_SEL1_30 \
MOD_SEL1_29 \
MOD_SEL0_28 MOD_SEL1_28 \
MOD_SEL0_27_26 \
......@@ -1058,7 +1059,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP10_27_24, RIF0_CLK_B, SEL_DRIF0_1),
PINMUX_IPSR_MSEL(IP10_27_24, SCL2_B, SEL_I2C2_1),
PINMUX_IPSR_MSEL(IP10_27_24, TCLK1_A, SEL_TIMER_TMU_0),
PINMUX_IPSR_GPSR(IP10_27_24, SSI_SCK2_B),
PINMUX_IPSR_MSEL(IP10_27_24, SSI_SCK2_B, SEL_SSI2_1),
PINMUX_IPSR_GPSR(IP10_27_24, TS_SCK0),
PINMUX_IPSR_GPSR(IP10_31_28, SD0_WP),
......@@ -1067,7 +1068,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP10_31_28, RIF0_D0_B, SEL_DRIF0_1),
PINMUX_IPSR_MSEL(IP10_31_28, SDA2_B, SEL_I2C2_1),
PINMUX_IPSR_MSEL(IP10_31_28, TCLK2_A, SEL_TIMER_TMU_0),
PINMUX_IPSR_GPSR(IP10_31_28, SSI_WS2_B),
PINMUX_IPSR_MSEL(IP10_31_28, SSI_WS2_B, SEL_SSI2_1),
PINMUX_IPSR_GPSR(IP10_31_28, TS_SDAT0),
/* IPSR11 */
......@@ -1085,13 +1086,13 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP11_11_8, RX0_A, SEL_SCIF0_0),
PINMUX_IPSR_MSEL(IP11_11_8, HRX1_A, SEL_HSCIF1_0),
PINMUX_IPSR_GPSR(IP11_11_8, SSI_SCK2_A),
PINMUX_IPSR_MSEL(IP11_11_8, SSI_SCK2_A, SEL_SSI2_0),
PINMUX_IPSR_GPSR(IP11_11_8, RIF1_SYNC),
PINMUX_IPSR_GPSR(IP11_11_8, TS_SCK1),
PINMUX_IPSR_MSEL(IP11_15_12, TX0_A, SEL_SCIF0_0),
PINMUX_IPSR_GPSR(IP11_15_12, HTX1_A),
PINMUX_IPSR_GPSR(IP11_15_12, SSI_WS2_A),
PINMUX_IPSR_MSEL(IP11_15_12, SSI_WS2_A, SEL_SSI2_0),
PINMUX_IPSR_GPSR(IP11_15_12, RIF1_D0),
PINMUX_IPSR_GPSR(IP11_15_12, TS_SDAT1),
......@@ -4957,11 +4958,12 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
MOD_SEL0_1_0 ))
},
{ PINMUX_CFG_REG_VAR("MOD_SEL1", 0xe6060504, 32,
GROUP(2, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1, 1,
2, 2, 2, 1, 1, 2, 1, 4),
GROUP(1, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1,
1, 2, 2, 2, 1, 1, 2, 1, 4),
GROUP(
/* RESERVED 31, 30 */
0, 0, 0, 0,
/* RESERVED 31 */
0, 0,
MOD_SEL1_30
MOD_SEL1_29
MOD_SEL1_28
/* RESERVED 27 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment