Commit 3677a3a7 authored by James Smart's avatar James Smart Committed by James Bottomley

[SCSI] lpfc 8.3.17: Replace function reset methodology

Replace graceful teardown steps with the singular function reset command.
Signed-off-by: default avatarAlex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: default avatarJames Smart <james.smart@emulex.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
parent eee8877e
......@@ -2887,65 +2887,6 @@ lpfc_stop_port(struct lpfc_hba *phba)
phba->lpfc_stop_port(phba);
}
/**
* lpfc_sli4_remove_dflt_fcf - Remove the driver default fcf record from the port.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to remove the driver default fcf record from
* the port. This routine currently acts on FCF Index 0.
*
**/
void
lpfc_sli_remove_dflt_fcf(struct lpfc_hba *phba)
{
int rc = 0;
LPFC_MBOXQ_t *mboxq;
struct lpfc_mbx_del_fcf_tbl_entry *del_fcf_record;
uint32_t mbox_tmo, req_len;
uint32_t shdr_status, shdr_add_status;
mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2020 Failed to allocate mbox for ADD_FCF cmd\n");
return;
}
req_len = sizeof(struct lpfc_mbx_del_fcf_tbl_entry) -
sizeof(struct lpfc_sli4_cfg_mhdr);
rc = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
LPFC_MBOX_OPCODE_FCOE_DELETE_FCF,
req_len, LPFC_SLI4_MBX_EMBED);
/*
* In phase 1, there is a single FCF index, 0. In phase2, the driver
* supports multiple FCF indices.
*/
del_fcf_record = &mboxq->u.mqe.un.del_fcf_entry;
bf_set(lpfc_mbx_del_fcf_tbl_count, del_fcf_record, 1);
bf_set(lpfc_mbx_del_fcf_tbl_index, del_fcf_record,
phba->fcf.current_rec.fcf_indx);
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
else {
mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
}
/* The IOCTL status is embedded in the mailbox subheader. */
shdr_status = bf_get(lpfc_mbox_hdr_status,
&del_fcf_record->header.cfg_shdr.response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
&del_fcf_record->header.cfg_shdr.response);
if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2516 DEL FCF of default FCF Index failed "
"mbx status x%x, status x%x add_status x%x\n",
rc, shdr_status, shdr_add_status);
}
if (rc != MBX_TIMEOUT)
mempool_free(mboxq, phba->mbox_mem_pool);
}
/**
* lpfc_fcf_redisc_wait_start_timer - Start fcf rediscover wait timer
* @phba: Pointer to hba for which this call is being executed.
......@@ -4288,12 +4229,6 @@ lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
{
struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
/* unregister default FCFI from the HBA */
lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
/* Free the default FCR table */
lpfc_sli_remove_dflt_fcf(phba);
/* Free memory allocated for msi-x interrupt vector entries */
kfree(phba->sli4_hba.msix_entries);
......@@ -4321,9 +4256,6 @@ lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
lpfc_sli4_cq_event_release_all(phba);
lpfc_sli4_cq_event_pool_destroy(phba);
/* Reset SLI4 HBA FCoE function */
lpfc_pci_function_reset(phba);
/* Free the bsmbx region. */
lpfc_destroy_bootstrap_mbox(phba);
......@@ -4550,7 +4482,6 @@ lpfc_free_sgl_list(struct lpfc_hba *phba)
{
struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
LIST_HEAD(sglq_list);
int rc = 0;
spin_lock_irq(&phba->hbalock);
list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
......@@ -4563,11 +4494,6 @@ lpfc_free_sgl_list(struct lpfc_hba *phba)
kfree(sglq_entry);
phba->sli4_hba.total_sglq_bufs--;
}
rc = lpfc_sli4_remove_all_sgl_pages(phba);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2005 Unable to deregister pages from HBA: %x\n", rc);
}
kfree(phba->sli4_hba.lpfc_els_sgl_array);
}
......@@ -6596,50 +6522,6 @@ lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt)
return cmdsent;
}
/**
* lpfc_sli4_fcfi_unreg - Unregister fcfi to device
* @phba: pointer to lpfc hba data structure.
* @fcfi: fcf index.
*
* This routine is invoked to unregister a FCFI from device.
**/
void
lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
{
LPFC_MBOXQ_t *mbox;
uint32_t mbox_tmo;
int rc;
unsigned long flags;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
return;
lpfc_unreg_fcfi(mbox, fcfi);
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
if (rc != MBX_TIMEOUT)
mempool_free(mbox, phba->mbox_mem_pool);
if (rc != MBX_SUCCESS)
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2517 Unregister FCFI command failed "
"status %d, mbxStatus x%x\n", rc,
bf_get(lpfc_mqe_status, &mbox->u.mqe));
else {
spin_lock_irqsave(&phba->hbalock, flags);
/* Mark the FCFI is no longer registered */
phba->fcf.fcf_flag &=
~(FCF_AVAILABLE | FCF_REGISTERED | FCF_SCAN_DONE);
spin_unlock_irqrestore(&phba->hbalock, flags);
}
}
/**
* lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space.
* @phba: pointer to lpfc hba data structure.
......@@ -7377,10 +7259,14 @@ lpfc_sli4_unset_hba(struct lpfc_hba *phba)
phba->pport->work_port_events = 0;
lpfc_sli4_hba_down(phba);
/* Stop the SLI4 device port */
lpfc_stop_port(phba);
lpfc_sli4_disable_intr(phba);
/* Reset SLI4 HBA FCoE function */
lpfc_pci_function_reset(phba);
return;
}
......@@ -7429,15 +7315,15 @@ lpfc_sli4_hba_unset(struct lpfc_hba *phba)
spin_unlock_irq(&phba->hbalock);
}
/* Tear down the queues in the HBA */
lpfc_sli4_queue_unset(phba);
/* Disable PCI subsystem interrupt */
lpfc_sli4_disable_intr(phba);
/* Stop kthread signal shall trigger work_done one more time */
kthread_stop(phba->worker_thread);
/* Reset SLI4 HBA FCoE function */
lpfc_pci_function_reset(phba);
/* Stop the SLI4 device port */
phba->pport->work_port_events = 0;
}
......@@ -8373,7 +8259,7 @@ lpfc_pci_remove_one_s4(struct pci_dev *pdev)
list_del_init(&vport->listentry);
spin_unlock_irq(&phba->hbalock);
/* Call scsi_free before lpfc_sli4_driver_resource_unset since scsi
/* Perform scsi free before driver resource_unset since scsi
* buffers are released to their corresponding pools here.
*/
lpfc_scsi_free(phba);
......
......@@ -6929,37 +6929,6 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
return 1;
}
/**
* lpfc_sli4_hba_down - PCI function resource cleanup for the SLI4 HBA
* @phba: Pointer to HBA context object.
*
* This function cleans up all queues, iocb, buffers, mailbox commands while
* shutting down the SLI4 HBA FCoE function. This function is called with no
* lock held and always returns 1.
*
* This function does the following to cleanup driver FCoE function resources:
* - Free discovery resources for each virtual port
* - Cleanup any pending fabric iocbs
* - Iterate through the iocb txq and free each entry in the list.
* - Free up any buffer posted to the HBA.
* - Clean up all the queue entries: WQ, RQ, MQ, EQ, CQ, etc.
* - Free mailbox commands in the mailbox queue.
**/
int
lpfc_sli4_hba_down(struct lpfc_hba *phba)
{
/* Stop the SLI4 device port */
lpfc_stop_port(phba);
/* Tear down the queues in the HBA */
lpfc_sli4_queue_unset(phba);
/* unregister default FCFI from the HBA */
lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
return 1;
}
/**
* lpfc_sli_pcimem_bcopy - SLI memory copy function
* @srcp: Source memory pointer.
......@@ -10788,51 +10757,6 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba,
}
return 0;
}
/**
* lpfc_sli4_remove_all_sgl_pages - Post scatter gather list for an XRI to HBA
* @phba: The virtual port for which this call being executed.
*
* This routine will remove all of the sgl pages registered with the hba.
*
* Return codes:
* 0 - Success
* -ENXIO, -ENOMEM - Failure
**/
int
lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *phba)
{
LPFC_MBOXQ_t *mbox;
int rc;
uint32_t shdr_status, shdr_add_status;
union lpfc_sli4_cfg_shdr *shdr;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
return -ENOMEM;
lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES, 0,
LPFC_SLI4_MBX_EMBED);
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else
rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
/* The IOCTL status is embedded in the mailbox subheader. */
shdr = (union lpfc_sli4_cfg_shdr *)
&mbox->u.mqe.un.sli4_config.header.cfg_shdr;
shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
if (rc != MBX_TIMEOUT)
mempool_free(mbox, phba->mbox_mem_pool);
if (shdr_status || shdr_add_status || rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2512 REMOVE_ALL_SGL_PAGES mailbox failed with "
"status x%x add_status x%x, mbx status x%x\n",
shdr_status, shdr_add_status, rc);
rc = -ENXIO;
}
return rc;
}
/**
* lpfc_sli4_next_xritag - Get an xritag for the io
......
......@@ -481,7 +481,6 @@ struct lpfc_rpi_hdr {
*/
int lpfc_pci_function_reset(struct lpfc_hba *);
int lpfc_sli4_hba_setup(struct lpfc_hba *);
int lpfc_sli4_hba_down(struct lpfc_hba *);
int lpfc_sli4_config(struct lpfc_hba *, struct lpfcMboxq *, uint8_t,
uint8_t, uint32_t, bool);
void lpfc_sli4_mbox_cmd_free(struct lpfc_hba *, struct lpfcMboxq *);
......@@ -514,7 +513,6 @@ int lpfc_sli4_queue_setup(struct lpfc_hba *);
void lpfc_sli4_queue_unset(struct lpfc_hba *);
int lpfc_sli4_post_sgl(struct lpfc_hba *, dma_addr_t, dma_addr_t, uint16_t);
int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
int lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *);
uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
int lpfc_sli4_post_async_mbox(struct lpfc_hba *);
int lpfc_sli4_post_sgl_list(struct lpfc_hba *phba);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment