Commit 369e1231 authored by Bill Pemberton's avatar Bill Pemberton Committed by Greg Kroah-Hartman

sis900: remove __dev* attributes

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: default avatarBill Pemberton <wfp5p@virginia.edu>
Cc: Daniele Venzano <venza@brownhat.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent fe80f565
......@@ -81,7 +81,7 @@
#define SIS900_MODULE_NAME "sis900"
#define SIS900_DRV_VERSION "v1.08.10 Apr. 2 2006"
static const char version[] __devinitconst =
static const char version[] =
KERN_INFO "sis900.c: " SIS900_DRV_VERSION "\n";
static int max_interrupt_work = 40;
......@@ -251,7 +251,8 @@ static const struct ethtool_ops sis900_ethtool_ops;
* @net_dev->perm_addr.
*/
static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev)
static int sis900_get_mac_addr(struct pci_dev *pci_dev,
struct net_device *net_dev)
{
struct sis900_private *sis_priv = netdev_priv(net_dev);
void __iomem *ioaddr = sis_priv->ioaddr;
......@@ -287,8 +288,8 @@ static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_de
* @net_dev->perm_addr.
*/
static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
struct net_device *net_dev)
static int sis630e_get_mac_addr(struct pci_dev *pci_dev,
struct net_device *net_dev)
{
struct pci_dev *isa_bridge = NULL;
u8 reg;
......@@ -330,8 +331,8 @@ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
* @net_dev->dev_addr and @net_dev->perm_addr.
*/
static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
struct net_device *net_dev)
static int sis635_get_mac_addr(struct pci_dev *pci_dev,
struct net_device *net_dev)
{
struct sis900_private *sis_priv = netdev_priv(net_dev);
void __iomem *ioaddr = sis_priv->ioaddr;
......@@ -377,8 +378,8 @@ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
* MAC address is read into @net_dev->dev_addr and @net_dev->perm_addr.
*/
static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev,
struct net_device *net_dev)
static int sis96x_get_mac_addr(struct pci_dev *pci_dev,
struct net_device *net_dev)
{
struct sis900_private *sis_priv = netdev_priv(net_dev);
void __iomem *ioaddr = sis_priv->ioaddr;
......@@ -433,7 +434,7 @@ static const struct net_device_ops sis900_netdev_ops = {
* ie: sis900_open(), sis900_start_xmit(), sis900_close(), etc.
*/
static int __devinit sis900_probe(struct pci_dev *pci_dev,
static int sis900_probe(struct pci_dev *pci_dev,
const struct pci_device_id *pci_id)
{
struct sis900_private *sis_priv;
......@@ -605,7 +606,7 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev,
* return error if it failed to found.
*/
static int __devinit sis900_mii_probe(struct net_device * net_dev)
static int sis900_mii_probe(struct net_device *net_dev)
{
struct sis900_private *sis_priv = netdev_priv(net_dev);
const char *dev_name = pci_name(sis_priv->pci_dev);
......@@ -824,7 +825,7 @@ static void sis900_set_capability(struct net_device *net_dev, struct mii_phy *ph
* Note that location is in word (16 bits) unit
*/
static u16 __devinit read_eeprom(void __iomem *ioaddr, int location)
static u16 read_eeprom(void __iomem *ioaddr, int location)
{
u32 read_cmd = location | EEread;
int i;
......@@ -2410,7 +2411,7 @@ static void sis900_reset(struct net_device *net_dev)
* remove and release SiS900 net device
*/
static void __devexit sis900_remove(struct pci_dev *pci_dev)
static void sis900_remove(struct pci_dev *pci_dev)
{
struct net_device *net_dev = pci_get_drvdata(pci_dev);
struct sis900_private *sis_priv = netdev_priv(net_dev);
......@@ -2496,7 +2497,7 @@ static struct pci_driver sis900_pci_driver = {
.name = SIS900_MODULE_NAME,
.id_table = sis900_pci_tbl,
.probe = sis900_probe,
.remove = __devexit_p(sis900_remove),
.remove = sis900_remove,
#ifdef CONFIG_PM
.suspend = sis900_suspend,
.resume = sis900_resume,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment