usb/mtu3: power down device ip at setup

Originally, when dr_mode is USB_DR_MODE_HOST, it didn't power down device ip,
so host ip sleep will fail at ssusb_host_disable.

Power down device ip at ssusb_host_setup.
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

drivers/usb/mtu3/mtu3_plat.c

@@ -200,6 +200,14 @@ static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb)
 	mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
 	udelay(1);
 	mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
+
+	/*
+	 * device ip may be powered on in firmware/BROM stage before entering
+	 * kernel stage;
+	 * power down device ip, otherwise ip-sleep will fail when working as
+	 * host only mode
+	 */
+	mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
 }
 
 /* ignore the error if the clock does not exist */