Commit 36ba3eae authored by Paul Cercueil's avatar Paul Cercueil Committed by Paul Burton

MIPS: DTS: jz4740: Add missing nodes

Add nodes for the MMC, AIC, ADC, CODEC, MUSB, LCD, memory,
and BCH controllers.
Signed-off-by: default avatarPaul Cercueil <paul@crapouillou.net>
Tested-by: default avatarArtur Rojek <contact@artur-rojek.eu>
Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
parent f066fa60
...@@ -132,6 +132,35 @@ gpd: gpio@3 { ...@@ -132,6 +132,35 @@ gpd: gpio@3 {
}; };
}; };
aic: audio-controller@10020000 {
compatible = "ingenic,jz4740-i2s";
reg = <0x10020000 0x38>;
#sound-dai-cells = <0>;
interrupt-parent = <&intc>;
interrupts = <18>;
clocks = <&cgu JZ4740_CLK_AIC>,
<&cgu JZ4740_CLK_I2S>,
<&cgu JZ4740_CLK_EXT>,
<&cgu JZ4740_CLK_PLL_HALF>;
clock-names = "aic", "i2s", "ext", "pll half";
dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
dma-names = "rx", "tx";
};
codec: audio-codec@100200a4 {
compatible = "ingenic,jz4740-codec";
reg = <0x10020080 0x8>;
#sound-dai-cells = <0>;
clocks = <&cgu JZ4740_CLK_AIC>;
clock-names = "aic";
};
mmc: mmc@10021000 { mmc: mmc@10021000 {
compatible = "ingenic,jz4740-mmc"; compatible = "ingenic,jz4740-mmc";
reg = <0x10021000 0x1000>; reg = <0x10021000 0x1000>;
...@@ -172,6 +201,38 @@ uart1: serial@10031000 { ...@@ -172,6 +201,38 @@ uart1: serial@10031000 {
clock-names = "baud", "module"; clock-names = "baud", "module";
}; };
adc: adc@10070000 {
compatible = "ingenic,jz4740-adc";
reg = <0x10070000 0x30>;
#io-channel-cells = <1>;
clocks = <&cgu JZ4740_CLK_ADC>;
clock-names = "adc";
interrupt-parent = <&intc>;
interrupts = <12>;
};
nemc: memory-controller@13010000 {
compatible = "ingenic,jz4740-nemc";
reg = <0x13010000 0x54>;
#address-cells = <2>;
#size-cells = <1>;
ranges = <1 0 0x18000000 0x4000000
2 0 0x14000000 0x4000000
3 0 0x0c000000 0x4000000
4 0 0x08000000 0x4000000>;
clocks = <&cgu JZ4740_CLK_MCLK>;
};
ecc: ecc-controller@13010100 {
compatible = "ingenic,jz4740-ecc";
reg = <0x13010100 0x2C>;
clocks = <&cgu JZ4740_CLK_MCLK>;
};
dmac: dma-controller@13020000 { dmac: dma-controller@13020000 {
compatible = "ingenic,jz4740-dma"; compatible = "ingenic,jz4740-dma";
reg = <0x13020000 0xbc reg = <0x13020000 0xbc
...@@ -197,4 +258,27 @@ uhc: uhc@13030000 { ...@@ -197,4 +258,27 @@ uhc: uhc@13030000 {
status = "disabled"; status = "disabled";
}; };
udc: usb@13040000 {
compatible = "ingenic,jz4740-musb";
reg = <0x13040000 0x10000>;
interrupt-parent = <&intc>;
interrupts = <24>;
interrupt-names = "mc";
clocks = <&cgu JZ4740_CLK_UDC>;
clock-names = "udc";
};
lcd: lcd-controller@13050000 {
compatible = "ingenic,jz4740-lcd";
reg = <0x13050000 0x1000>;
interrupt-parent = <&intc>;
interrupts = <30>;
clocks = <&cgu JZ4740_CLK_LCD_PCLK>, <&cgu JZ4740_CLK_LCD>;
clock-names = "lcd_pclk", "lcd";
};
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment