Commit 377ecca9 authored by Giuseppe CAVALLARO's avatar Giuseppe CAVALLARO Committed by David S. Miller

phy: add the IC+ IP1001 driver

This patch adds the IC+ IP1001 (Gigabit Ethernet Transceiver) driver.
I've had to add an additional delay (2ns) to adjust RX clock phase at
GMII/ RGMII interface (according to the PHY data-sheet). This helps to
have the RGMII working on some ST platforms.
Signed-off-by: default avatarGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d9ca676b
...@@ -64,7 +64,7 @@ config BCM63XX_PHY ...@@ -64,7 +64,7 @@ config BCM63XX_PHY
config ICPLUS_PHY config ICPLUS_PHY
tristate "Drivers for ICPlus PHYs" tristate "Drivers for ICPlus PHYs"
---help--- ---help---
Currently supports the IP175C PHY. Currently supports the IP175C and IP1001 PHYs.
config REALTEK_PHY config REALTEK_PHY
tristate "Drivers for Realtek PHYs" tristate "Drivers for Realtek PHYs"
......
...@@ -30,7 +30,7 @@ ...@@ -30,7 +30,7 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/uaccess.h> #include <asm/uaccess.h>
MODULE_DESCRIPTION("ICPlus IP175C PHY driver"); MODULE_DESCRIPTION("ICPlus IP175C/IC1001 PHY drivers");
MODULE_AUTHOR("Michael Barkowski"); MODULE_AUTHOR("Michael Barkowski");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
...@@ -89,6 +89,33 @@ static int ip175c_config_init(struct phy_device *phydev) ...@@ -89,6 +89,33 @@ static int ip175c_config_init(struct phy_device *phydev)
return 0; return 0;
} }
static int ip1001_config_init(struct phy_device *phydev)
{
int err, value;
/* Software Reset PHY */
value = phy_read(phydev, MII_BMCR);
value |= BMCR_RESET;
err = phy_write(phydev, MII_BMCR, value);
if (err < 0)
return err;
do {
value = phy_read(phydev, MII_BMCR);
} while (value & BMCR_RESET);
/* Additional delay (2ns) used to adjust RX clock phase
* at GMII/ RGMII interface */
value = phy_read(phydev, 16);
value |= 0x3;
err = phy_write(phydev, 16, value);
if (err < 0)
return err;
return err;
}
static int ip175c_read_status(struct phy_device *phydev) static int ip175c_read_status(struct phy_device *phydev)
{ {
if (phydev->addr == 4) /* WAN port */ if (phydev->addr == 4) /* WAN port */
...@@ -121,21 +148,43 @@ static struct phy_driver ip175c_driver = { ...@@ -121,21 +148,43 @@ static struct phy_driver ip175c_driver = {
.driver = { .owner = THIS_MODULE,}, .driver = { .owner = THIS_MODULE,},
}; };
static int __init ip175c_init(void) static struct phy_driver ip1001_driver = {
.phy_id = 0x02430d90,
.name = "ICPlus IP1001",
.phy_id_mask = 0x0ffffff0,
.features = PHY_GBIT_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause,
.config_init = &ip1001_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
.driver = { .owner = THIS_MODULE,},
};
static int __init icplus_init(void)
{ {
int ret = 0;
ret = phy_driver_register(&ip1001_driver);
if (ret < 0)
return -ENODEV;
return phy_driver_register(&ip175c_driver); return phy_driver_register(&ip175c_driver);
} }
static void __exit ip175c_exit(void) static void __exit icplus_exit(void)
{ {
phy_driver_unregister(&ip1001_driver);
phy_driver_unregister(&ip175c_driver); phy_driver_unregister(&ip175c_driver);
} }
module_init(ip175c_init); module_init(icplus_init);
module_exit(ip175c_exit); module_exit(icplus_exit);
static struct mdio_device_id __maybe_unused icplus_tbl[] = { static struct mdio_device_id __maybe_unused icplus_tbl[] = {
{ 0x02430d80, 0x0ffffff0 }, { 0x02430d80, 0x0ffffff0 },
{ 0x02430d90, 0x0ffffff0 },
{ } { }
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment