arm64: dts: qcom: msm8916-pins: move sdhc2 cd node with its siblings

Nodes relative to the first sdhc node were interlaced with node of the
second sdhc. Move sdhc2_cd_pin with its siblings to prevent that. Also
rename the grouping node from sdhc2_cd_pin to pmx_sdc2_cd_pin, as
"pmx_sdc" is the prefix used by other nodes.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

arch/arm64/boot/dts/qcom/msm8916-pins.dtsi

@@ -342,31 +342,6 @@ pinconf {
 		};
 	};
 
-	sdhc2_cd_pin {
-		sdc2_cd_on: cd_on {
-			pinmux {
-				function = "gpio";
-				pins = "gpio38";
-			};
-			pinconf {
-				pins = "gpio38";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-		};
-		sdc2_cd_off: cd_off {
-			pinmux {
-				function = "gpio";
-				pins = "gpio38";
-			};
-			pinconf {
-				pins = "gpio38";
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-	};
-
 	pmx_sdc1_clk {
 		sdc1_clk_on: clk_on {
 			pinmux {
@@ -505,6 +480,31 @@ pinconf {
 		};
 	};
 
+	pmx_sdc2_cd_pin {
+		sdc2_cd_on: cd_on {
+			pinmux {
+				function = "gpio";
+				pins = "gpio38";
+			};
+			pinconf {
+				pins = "gpio38";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+		sdc2_cd_off: cd_off {
+			pinmux {
+				function = "gpio";
+				pins = "gpio38";
+			};
+			pinconf {
+				pins = "gpio38";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
 	cdc-pdm-lines {
 		cdc_pdm_lines_act: pdm_lines_on {
 			pinmux {