drm/amd/pm: enable Sienna Cichlid overdrive support

Enable Sienna Cichlid gfxclk/uclk overdrive support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/pm/amdgpu_pm.c

@@ -730,7 +730,8 @@ static ssize_t amdgpu_set_pp_table(struct device *dev,
  *
  * - minimum and maximum engine clock labeled OD_SCLK
  *
- * - maximum memory clock labeled OD_MCLK
+ * - minimum(not available for Vega20 and Navi1x) and maximum memory
+ *   clock labeled OD_MCLK
  *
  * - three <frequency, voltage> points labeled OD_VDDC_CURVE.
  *   They can be used to calibrate the sclk voltage curve.

drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c

@@ -913,6 +913,22 @@ static bool sienna_cichlid_is_support_fine_grained_dpm(struct smu_context *smu,
 	return dpm_desc->SnapToDiscrete == 0 ? true : false;
 }
 
+static bool sienna_cichlid_is_od_feature_supported(struct smu_11_0_7_overdrive_table *od_table,
+						   enum SMU_11_0_7_ODFEATURE_CAP cap)
+{
+	return od_table->cap[cap];
+}
+
+static void sienna_cichlid_get_od_setting_range(struct smu_11_0_7_overdrive_table *od_table,
+						enum SMU_11_0_7_ODSETTING_ID setting,
+						uint32_t *min, uint32_t *max)
+{
+	if (min)
+		*min = od_table->min[setting];
+	if (max)
+		*max = od_table->max[setting];
+}
+
 static int sienna_cichlid_print_clk_levels(struct smu_context *smu,
 			enum smu_clk_type clk_type, char *buf)
 {
@@ -921,11 +937,15 @@ static int sienna_cichlid_print_clk_levels(struct smu_context *smu,
 	struct smu_dpm_context *smu_dpm = &smu->smu_dpm;
 	struct smu_11_0_dpm_context *dpm_context = smu_dpm->dpm_context;
 	PPTable_t *pptable = (PPTable_t *)table_context->driver_pptable;
+	struct smu_11_0_7_overdrive_table *od_settings = smu->od_settings;
+	OverDriveTable_t *od_table =
+		(OverDriveTable_t *)table_context->overdrive_table;
 	int i, size = 0, ret = 0;
 	uint32_t cur_value = 0, value = 0, count = 0;
 	uint32_t freq_values[3] = {0};
 	uint32_t mark_index = 0;
 	uint32_t gen_speed, lane_width;
+	uint32_t min_value, max_value;
 
 	switch (clk_type) {
 	case SMU_GFXCLK:
@@ -1001,6 +1021,53 @@ static int sienna_cichlid_print_clk_levels(struct smu_context *smu,
 					(lane_width == dpm_context->dpm_tables.pcie_table.pcie_lane[i]) ?
 					"*" : "");
 		break;
+	case SMU_OD_SCLK:
+		if (!smu->od_enabled || !od_table || !od_settings)
+			break;
+
+		if (!sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_GFXCLK_LIMITS))
+			break;
+
+		size += sprintf(buf + size, "OD_SCLK:\n");
+		size += sprintf(buf + size, "0: %uMhz\n1: %uMhz\n", od_table->GfxclkFmin, od_table->GfxclkFmax);
+		break;
+
+	case SMU_OD_MCLK:
+		if (!smu->od_enabled || !od_table || !od_settings)
+			break;
+
+		if (!sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_UCLK_LIMITS))
+			break;
+
+		size += sprintf(buf + size, "OD_MCLK:\n");
+		size += sprintf(buf + size, "0: %uMhz\n1: %uMHz\n", od_table->UclkFmin, od_table->UclkFmax);
+		break;
+
+	case SMU_OD_RANGE:
+		if (!smu->od_enabled || !od_table || !od_settings)
+			break;
+
+		size = sprintf(buf, "%s:\n", "OD_RANGE");
+
+		if (sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_GFXCLK_LIMITS)) {
+			sienna_cichlid_get_od_setting_range(od_settings, SMU_11_0_7_ODSETTING_GFXCLKFMIN,
+							    &min_value, NULL);
+			sienna_cichlid_get_od_setting_range(od_settings, SMU_11_0_7_ODSETTING_GFXCLKFMAX,
+							    NULL, &max_value);
+			size += sprintf(buf + size, "SCLK: %7uMhz %10uMhz\n",
+					min_value, max_value);
+		}
+
+		if (sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_UCLK_LIMITS)) {
+			sienna_cichlid_get_od_setting_range(od_settings, SMU_11_0_7_ODSETTING_UCLKFMIN,
+							    &min_value, NULL);
+			sienna_cichlid_get_od_setting_range(od_settings, SMU_11_0_7_ODSETTING_UCLKFMAX,
+							    NULL, &max_value);
+			size += sprintf(buf + size, "MCLK: %7uMhz %10uMhz\n",
+					min_value, max_value);
+		}
+		break;
+
 	default:
 		break;
 	}
@@ -1731,6 +1798,179 @@ static int sienna_cichlid_set_default_od_settings(struct smu_context *smu)
 	return 0;
 }
 
+static int sienna_cichlid_od_setting_check_range(struct smu_context *smu,
+						 struct smu_11_0_7_overdrive_table *od_table,
+						 enum SMU_11_0_7_ODSETTING_ID setting,
+						 uint32_t value)
+{
+	if (value < od_table->min[setting]) {
+		dev_warn(smu->adev->dev, "OD setting (%d, %d) is less than the minimum allowed (%d)\n",
+					  setting, value, od_table->min[setting]);
+		return -EINVAL;
+	}
+	if (value > od_table->max[setting]) {
+		dev_warn(smu->adev->dev, "OD setting (%d, %d) is greater than the maximum allowed (%d)\n",
+					  setting, value, od_table->max[setting]);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int sienna_cichlid_od_edit_dpm_table(struct smu_context *smu,
+					    enum PP_OD_DPM_TABLE_COMMAND type,
+					    long input[], uint32_t size)
+{
+	struct smu_table_context *table_context = &smu->smu_table;
+	OverDriveTable_t *od_table =
+		(OverDriveTable_t *)table_context->overdrive_table;
+	struct smu_11_0_7_overdrive_table *od_settings =
+		(struct smu_11_0_7_overdrive_table *)smu->od_settings;
+	enum SMU_11_0_7_ODSETTING_ID freq_setting;
+	uint16_t *freq_ptr;
+	int i, ret = 0;
+
+	if (!smu->od_enabled) {
+		dev_warn(smu->adev->dev, "OverDrive is not enabled!\n");
+		return -EINVAL;
+	}
+
+	if (!smu->od_settings) {
+		dev_err(smu->adev->dev, "OD board limits are not set!\n");
+		return -ENOENT;
+	}
+
+	if (!(table_context->overdrive_table && table_context->boot_overdrive_table)) {
+		dev_err(smu->adev->dev, "Overdrive table was not initialized!\n");
+		return -EINVAL;
+	}
+
+	switch (type) {
+	case PP_OD_EDIT_SCLK_VDDC_TABLE:
+		if (!sienna_cichlid_is_od_feature_supported(od_settings,
+							    SMU_11_0_7_ODCAP_GFXCLK_LIMITS)) {
+			dev_warn(smu->adev->dev, "GFXCLK_LIMITS not supported!\n");
+			return -ENOTSUPP;
+		}
+
+		for (i = 0; i < size; i += 2) {
+			if (i + 2 > size) {
+				dev_info(smu->adev->dev, "invalid number of input parameters %d\n", size);
+				return -EINVAL;
+			}
+
+			switch (input[i]) {
+			case 0:
+				if (input[i + 1] > od_table->GfxclkFmax) {
+					dev_info(smu->adev->dev, "GfxclkFmin (%ld) must be <= GfxclkFmax (%u)!\n",
+						input[i + 1], od_table->GfxclkFmax);
+					return -EINVAL;
+				}
+
+				freq_setting = SMU_11_0_7_ODSETTING_GFXCLKFMIN;
+				freq_ptr = &od_table->GfxclkFmin;
+				break;
+
+			case 1:
+				if (input[i + 1] < od_table->GfxclkFmin) {
+					dev_info(smu->adev->dev, "GfxclkFmax (%ld) must be >= GfxclkFmin (%u)!\n",
+						input[i + 1], od_table->GfxclkFmin);
+					return -EINVAL;
+				}
+
+				freq_setting = SMU_11_0_7_ODSETTING_GFXCLKFMAX;
+				freq_ptr = &od_table->GfxclkFmax;
+				break;
+
+			default:
+				dev_info(smu->adev->dev, "Invalid SCLK_VDDC_TABLE index: %ld\n", input[i]);
+				dev_info(smu->adev->dev, "Supported indices: [0:min,1:max]\n");
+				return -EINVAL;
+			}
+
+			ret = sienna_cichlid_od_setting_check_range(smu, od_settings,
+								    freq_setting, input[i + 1]);
+			if (ret)
+				return ret;
+
+			*freq_ptr = (uint16_t)input[i + 1];
+		}
+		break;
+
+	case PP_OD_EDIT_MCLK_VDDC_TABLE:
+		if (!sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_UCLK_LIMITS)) {
+			dev_warn(smu->adev->dev, "UCLK_LIMITS not supported!\n");
+			return -ENOTSUPP;
+		}
+
+		for (i = 0; i < size; i += 2) {
+			if (i + 2 > size) {
+				dev_info(smu->adev->dev, "invalid number of input parameters %d\n", size);
+				return -EINVAL;
+			}
+
+			switch (input[i]) {
+			case 0:
+				if (input[i + 1] > od_table->UclkFmax) {
+					dev_info(smu->adev->dev, "UclkFmin (%ld) must be <= UclkFmax (%u)!\n",
+						input[i + 1], od_table->UclkFmax);
+					return -EINVAL;
+				}
+
+				freq_setting = SMU_11_0_7_ODSETTING_UCLKFMIN;
+				freq_ptr = &od_table->UclkFmin;
+				break;
+
+			case 1:
+				if (input[i + 1] < od_table->UclkFmin) {
+					dev_info(smu->adev->dev, "UclkFmax (%ld) must be >= UclkFmin (%u)!\n",
+						input[i + 1], od_table->UclkFmin);
+					return -EINVAL;
+				}
+
+				freq_setting = SMU_11_0_7_ODSETTING_UCLKFMAX;
+				freq_ptr = &od_table->UclkFmax;
+				break;
+
+			default:
+				dev_info(smu->adev->dev, "Invalid MCLK_VDDC_TABLE index: %ld\n", input[i]);
+				dev_info(smu->adev->dev, "Supported indices: [0:min,1:max]\n");
+				return -EINVAL;
+			}
+
+			ret = sienna_cichlid_od_setting_check_range(smu, od_settings,
+								    freq_setting, input[i + 1]);
+			if (ret)
+				return ret;
+
+			*freq_ptr = (uint16_t)input[i + 1];
+		}
+		break;
+
+	case PP_OD_RESTORE_DEFAULT_TABLE:
+		memcpy(table_context->overdrive_table,
+				table_context->boot_overdrive_table,
+				sizeof(OverDriveTable_t));
+		fallthrough;
+
+	case PP_OD_COMMIT_DPM_TABLE:
+		sienna_cichlid_dump_od_table(smu, od_table);
+
+		ret = smu_cmn_update_table(smu, SMU_TABLE_OVERDRIVE,
+					   0, (void *)od_table, true);
+		if (ret) {
+			dev_err(smu->adev->dev, "Failed to import overdrive table!\n");
+			return ret;
+		}
+		break;
+
+	default:
+		return -ENOSYS;
+	}
+
+	return ret;
+}
+
 static int sienna_cichlid_run_btc(struct smu_context *smu)
 {
 	return smu_cmn_send_smc_msg(smu, SMU_MSG_RunDcBtc, NULL);
@@ -2855,6 +3095,7 @@ static const struct pptable_funcs sienna_cichlid_ppt_funcs = {
 	.get_dpm_ultimate_freq = sienna_cichlid_get_dpm_ultimate_freq,
 	.set_soft_freq_limited_range = smu_v11_0_set_soft_freq_limited_range,
 	.set_default_od_settings = sienna_cichlid_set_default_od_settings,
+	.od_edit_dpm_table = sienna_cichlid_od_edit_dpm_table,
 	.run_btc = sienna_cichlid_run_btc,
 	.set_power_source = smu_v11_0_set_power_source,
 	.get_pp_feature_mask = smu_cmn_get_pp_feature_mask,