Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-parport: Various cleanups
  i2c-i801: Don't depend on other kernel driver config options
  i2c-i801: Check for vendor Fujitsu before probing for apanel
  i2c-i801: Don't probe for slaves on IDF channels
  i2c-i801: SMBus patch for Intel Panther Point DeviceIDs
  i2c/writing-clients: Fix foo_driver.id_table

Documentation/i2c/busses/i2c-i801

@@ -19,6 +19,7 @@ Supported adapters:
   * Intel 6 Series (PCH)
   * Intel Patsburg (PCH)
   * Intel DH89xxCC (PCH)
+  * Intel Panther Point (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

Documentation/i2c/writing-clients

@@ -38,7 +38,7 @@ static struct i2c_driver foo_driver = {
 		.name	= "foo",
 	},
 
-	.id_table	= foo_ids,
+	.id_table	= foo_idtable,
 	.probe		= foo_probe,
 	.remove		= foo_remove,
 	/* if device autodetection is needed: */

drivers/i2c/busses/Kconfig

@@ -79,6 +79,7 @@ config I2C_AMD8111
 config I2C_I801
 	tristate "Intel 82801 (ICH/PCH)"
 	depends on PCI
+	select CHECK_SIGNATURE if X86 && DMI
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  801 family of mainboard I2C interfaces.  Specifically, the following
@@ -101,6 +102,7 @@ config I2C_I801
 	    6 Series (PCH)
 	    Patsburg (PCH)
 	    DH89xxCC (PCH)
+	    Panther Point (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.

drivers/i2c/busses/i2c-i801.c

@@ -50,6 +50,7 @@
   Patsburg (PCH) IDF    0x1d71     32     hard     yes     yes     yes
   Patsburg (PCH) IDF    0x1d72     32     hard     yes     yes     yes
   DH89xxCC (PCH)        0x2330     32     hard     yes     yes     yes
+  Panther Point (PCH)   0x1e22     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -137,11 +138,11 @@
 /* Older devices have their ID defined in <linux/pci_ids.h> */
 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS	0x1c22
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS	0x1d22
-#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS	0x1e22
 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0	0x1d70
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1	0x1d71
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2	0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS	0x1e22
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
 
@@ -159,6 +160,8 @@ static struct pci_driver i801_driver;
 #define FEATURE_BLOCK_BUFFER	(1 << 1)
 #define FEATURE_BLOCK_PROC	(1 << 2)
 #define FEATURE_I2C_BLOCK_READ	(1 << 3)
+/* Not really a feature, but it's convenient to handle it as such */
+#define FEATURE_IDF		(1 << 15)
 
 static const char *i801_feature_names[] = {
 	"SMBus PEC",
@@ -629,12 +632,13 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
 	{ 0, }
 };
 
 MODULE_DEVICE_TABLE(pci, i801_ids);
 
-#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
+#if defined CONFIG_X86 && defined CONFIG_DMI
 static unsigned char apanel_addr;
 
 /* Scan the system ROM for the signature "FJKEYINF" */
@@ -664,11 +668,7 @@ static void __init input_apanel_init(void)
 	}
 	iounmap(bios);
 }
-#else
-static void __init input_apanel_init(void) {}
-#endif
 
-#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
 struct dmi_onboard_device_info {
 	const char *name;
 	u8 type;
@@ -734,7 +734,30 @@ static void __devinit dmi_check_onboard_devices(const struct dmi_header *dm,
 		dmi_check_onboard_device(type, name, adap);
 	}
 }
-#endif
+
+/* Register optional slaves */
+static void __devinit i801_probe_optional_slaves(struct i801_priv *priv)
+{
+	/* Only register slaves on main SMBus channel */
+	if (priv->features & FEATURE_IDF)
+		return;
+
+	if (apanel_addr) {
+		struct i2c_board_info info;
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		info.addr = apanel_addr;
+		strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
+		i2c_new_device(&priv->adapter, &info);
+	}
+
+	if (dmi_name_in_vendors("FUJITSU"))
+		dmi_walk(dmi_check_onboard_devices, &priv->adapter);
+}
+#else
+static void __init input_apanel_init(void) {}
+static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {}
+#endif	/* CONFIG_X86 && CONFIG_DMI */
 
 static int __devinit i801_probe(struct pci_dev *dev,
 				const struct pci_device_id *id)
@@ -754,6 +777,11 @@ static int __devinit i801_probe(struct pci_dev *dev,
 
 	priv->pci_dev = dev;
 	switch (dev->device) {
+	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
+	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
+	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
+		priv->features |= FEATURE_IDF;
+		/* fall through */
 	default:
 		priv->features |= FEATURE_I2C_BLOCK_READ;
 		/* fall through */
@@ -839,21 +867,7 @@ static int __devinit i801_probe(struct pci_dev *dev,
 		goto exit_release;
 	}
 
-	/* Register optional slaves */
-#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
-	if (apanel_addr) {
-		struct i2c_board_info info;
-
-		memset(&info, 0, sizeof(struct i2c_board_info));
-		info.addr = apanel_addr;
-		strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
-		i2c_new_device(&priv->adapter, &info);
-	}
-#endif
-#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
-	if (dmi_name_in_vendors("FUJITSU"))
-		dmi_walk(dmi_check_onboard_devices, &priv->adapter);
-#endif
+	i801_probe_optional_slaves(priv);
 
 	pci_set_drvdata(dev, priv);
 	return 0;
@@ -913,7 +927,8 @@ static struct pci_driver i801_driver = {
 
 static int __init i2c_i801_init(void)
 {
-	input_apanel_init();
+	if (dmi_name_in_vendors("FUJITSU"))
+		input_apanel_init();
 	return pci_register_driver(&i801_driver);
 }
 

drivers/i2c/busses/i2c-parport-light.c

@@ -2,13 +2,13 @@
  * i2c-parport-light.c I2C bus over parallel port                           *
  * ------------------------------------------------------------------------ *
    Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
-   
+
    Based on older i2c-velleman.c driver
    Copyright (C) 1995-2000 Simon G. Vogl
    With some changes from:
    Frodo Looijaard <frodol@dds.nl>
    Kyösti Mälkki <kmalkki@cc.hut.fi>
-   
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
@@ -114,7 +114,7 @@ static struct i2c_algo_bit_data parport_algo_data = {
 	.getscl		= parport_getscl,
 	.udelay		= 50,
 	.timeout	= HZ,
-}; 
+};
 
 /* ----- Driver registration ---------------------------------------------- */
 
@@ -132,7 +132,7 @@ static struct i2c_smbus_alert_setup alert_data = {
 static struct i2c_client *ara;
 static struct lineop parport_ctrl_irq = {
 	.val		= (1 << 4),
-	.port		= CTRL,
+	.port		= PORT_CTRL,
 };
 
 static int __devinit i2c_parport_probe(struct platform_device *pdev)
@@ -245,7 +245,7 @@ static int __init i2c_parport_init(void)
 	if (irq != 0)
 		pr_info(DRVNAME ": using irq %d\n", irq);
 
-        if (!adapter_parm[type].getscl.val)
+	if (!adapter_parm[type].getscl.val)
 		parport_algo_data.getscl = NULL;
 
 	/* Sets global pdev as a side effect */

drivers/i2c/busses/i2c-parport.c

@@ -2,13 +2,13 @@
  * i2c-parport.c I2C bus over parallel port                                 *
  * ------------------------------------------------------------------------ *
    Copyright (C) 2003-2011 Jean Delvare <khali@linux-fr.org>
-   
+
    Based on older i2c-philips-par.c driver
    Copyright (C) 1995-2000 Simon G. Vogl
    With some changes from:
    Frodo Looijaard <frodol@dds.nl>
    Kyösti Mälkki <kmalkki@cc.hut.fi>
-   
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
@@ -78,13 +78,13 @@ static unsigned char port_read_control(struct parport *p)
 	return parport_read_control(p);
 }
 
-static void (*port_write[])(struct parport *, unsigned char) = {
+static void (* const port_write[])(struct parport *, unsigned char) = {
 	port_write_data,
 	NULL,
 	port_write_control,
 };
 
-static unsigned char (*port_read[])(struct parport *) = {
+static unsigned char (* const port_read[])(struct parport *) = {
 	port_read_data,
 	port_read_status,
 	port_read_control,
@@ -147,7 +147,7 @@ static const struct i2c_algo_bit_data parport_algo_data = {
 	.getscl		= parport_getscl,
 	.udelay		= 10, /* ~50 kbps */
 	.timeout	= HZ,
-}; 
+};
 
 /* ----- I2c and parallel port call-back functions and structures --------- */
 
@@ -164,10 +164,10 @@ void i2c_parport_irq(void *data)
 			"SMBus alert received but no ARA client!\n");
 }
 
-static void i2c_parport_attach (struct parport *port)
+static void i2c_parport_attach(struct parport *port)
 {
 	struct i2c_par *adapter;
-	
+
 	adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL);
 	if (adapter == NULL) {
 		printk(KERN_ERR "i2c-parport: Failed to kzalloc\n");
@@ -180,7 +180,7 @@ static void i2c_parport_attach (struct parport *port)
 		NULL, NULL, i2c_parport_irq, PARPORT_FLAG_EXCL, adapter);
 	if (!adapter->pdev) {
 		printk(KERN_ERR "i2c-parport: Unable to register with parport\n");
-		goto ERROR0;
+		goto err_free;
 	}
 
 	/* Fill the rest of the structure */
@@ -200,7 +200,7 @@ static void i2c_parport_attach (struct parport *port)
 
 	if (parport_claim_or_block(adapter->pdev) < 0) {
 		printk(KERN_ERR "i2c-parport: Could not claim parallel port\n");
-		goto ERROR1;
+		goto err_unregister;
 	}
 
 	/* Reset hardware to a sane state (SCL and SDA high) */
@@ -215,7 +215,7 @@ static void i2c_parport_attach (struct parport *port)
 
 	if (i2c_bit_add_bus(&adapter->adapter) < 0) {
 		printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
-		goto ERROR1;
+		goto err_unregister;
 	}
 
 	/* Setup SMBus alert if supported */
@@ -234,16 +234,16 @@ static void i2c_parport_attach (struct parport *port)
 	mutex_lock(&adapter_list_lock);
 	list_add_tail(&adapter->node, &adapter_list);
 	mutex_unlock(&adapter_list_lock);
-        return;
+	return;
 
-ERROR1:
+ err_unregister:
 	parport_release(adapter->pdev);
 	parport_unregister_device(adapter->pdev);
-ERROR0:
+ err_free:
 	kfree(adapter);
 }
 
-static void i2c_parport_detach (struct parport *port)
+static void i2c_parport_detach(struct parport *port)
 {
 	struct i2c_par *adapter, *_n;
 
@@ -260,7 +260,7 @@ static void i2c_parport_detach (struct parport *port)
 			/* Un-init if needed (power off...) */
 			if (adapter_parm[type].init.val)
 				line_set(port, 0, &adapter_parm[type].init);
-				
+
 			parport_release(adapter->pdev);
 			parport_unregister_device(adapter->pdev);
 			list_del(&adapter->node);

drivers/i2c/busses/i2c-parport.h

@@ -2,7 +2,7 @@
  * i2c-parport.h I2C bus over parallel port                                 *
  * ------------------------------------------------------------------------ *
    Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
-   
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
@@ -18,13 +18,9 @@
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  * ------------------------------------------------------------------------ */
 
-#ifdef DATA
-#undef DATA
-#endif
-
-#define DATA	0
-#define STAT	1
-#define CTRL	2
+#define PORT_DATA	0
+#define PORT_STAT	1
+#define PORT_CTRL	2
 
 struct lineop {
 	u8 val;
@@ -41,61 +37,61 @@ struct adapter_parm {
 	unsigned int smbus_alert:1;
 };
 
-static struct adapter_parm adapter_parm[] = {
+static const struct adapter_parm adapter_parm[] = {
 	/* type 0: Philips adapter */
 	{
-		.setsda	= { 0x80, DATA, 1 },
-		.setscl	= { 0x08, CTRL, 0 },
-		.getsda	= { 0x80, STAT, 0 },
-		.getscl	= { 0x08, STAT, 0 },
+		.setsda	= { 0x80, PORT_DATA, 1 },
+		.setscl	= { 0x08, PORT_CTRL, 0 },
+		.getsda	= { 0x80, PORT_STAT, 0 },
+		.getscl	= { 0x08, PORT_STAT, 0 },
 	},
 	/* type 1: home brew teletext adapter */
 	{
-		.setsda	= { 0x02, DATA, 0 },
-		.setscl	= { 0x01, DATA, 0 },
-		.getsda	= { 0x80, STAT, 1 },
+		.setsda	= { 0x02, PORT_DATA, 0 },
+		.setscl	= { 0x01, PORT_DATA, 0 },
+		.getsda	= { 0x80, PORT_STAT, 1 },
 	},
 	/* type 2: Velleman K8000 adapter */
 	{
-		.setsda	= { 0x02, CTRL, 1 },
-		.setscl	= { 0x08, CTRL, 1 },
-		.getsda	= { 0x10, STAT, 0 },
+		.setsda	= { 0x02, PORT_CTRL, 1 },
+		.setscl	= { 0x08, PORT_CTRL, 1 },
+		.getsda	= { 0x10, PORT_STAT, 0 },
 	},
 	/* type 3: ELV adapter */
 	{
-		.setsda	= { 0x02, DATA, 1 },
-		.setscl	= { 0x01, DATA, 1 },
-		.getsda	= { 0x40, STAT, 1 },
-		.getscl	= { 0x08, STAT, 1 },
+		.setsda	= { 0x02, PORT_DATA, 1 },
+		.setscl	= { 0x01, PORT_DATA, 1 },
+		.getsda	= { 0x40, PORT_STAT, 1 },
+		.getscl	= { 0x08, PORT_STAT, 1 },
 	},
 	/* type 4: ADM1032 evaluation board */
 	{
-		.setsda	= { 0x02, DATA, 1 },
-		.setscl	= { 0x01, DATA, 1 },
-		.getsda	= { 0x10, STAT, 1 },
-		.init	= { 0xf0, DATA, 0 },
+		.setsda	= { 0x02, PORT_DATA, 1 },
+		.setscl	= { 0x01, PORT_DATA, 1 },
+		.getsda	= { 0x10, PORT_STAT, 1 },
+		.init	= { 0xf0, PORT_DATA, 0 },
 		.smbus_alert = 1,
 	},
 	/* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */
 	{
-		.setsda	= { 0x02, DATA, 1 },
-		.setscl	= { 0x01, DATA, 1 },
-		.getsda	= { 0x10, STAT, 1 },
+		.setsda	= { 0x02, PORT_DATA, 1 },
+		.setscl	= { 0x01, PORT_DATA, 1 },
+		.getsda	= { 0x10, PORT_STAT, 1 },
 	},
 	/* type 6: Barco LPT->DVI (K5800236) adapter */
 	{
-		.setsda	= { 0x02, DATA, 1 },
-		.setscl	= { 0x01, DATA, 1 },
-		.getsda	= { 0x20, STAT, 0 },
-		.getscl	= { 0x40, STAT, 0 },
-		.init	= { 0xfc, DATA, 0 },
+		.setsda	= { 0x02, PORT_DATA, 1 },
+		.setscl	= { 0x01, PORT_DATA, 1 },
+		.getsda	= { 0x20, PORT_STAT, 0 },
+		.getscl	= { 0x40, PORT_STAT, 0 },
+		.init	= { 0xfc, PORT_DATA, 0 },
 	},
 	/* type 7: One For All JP1 parallel port adapter */
 	{
-		.setsda	= { 0x01, DATA, 0 },
-		.setscl	= { 0x02, DATA, 0 },
-		.getsda	= { 0x80, STAT, 1 },
-		.init	= { 0x04, DATA, 1 },
+		.setsda	= { 0x01, PORT_DATA, 0 },
+		.setscl	= { 0x02, PORT_DATA, 0 },
+		.getsda	= { 0x80, PORT_STAT, 1 },
+		.init	= { 0x04, PORT_DATA, 1 },
 	},
 };