Commit 3813810c authored by Benjamin Tissoires's avatar Benjamin Tissoires Committed by Dmitry Torokhov

Input: wacom - split out the pad device for Graphire G4 and MO

MSC_SERIAL can be safely removed from pad devices. If it is not
here, xf86-input-wacom correctly generates ones for its internal
use.
Signed-off-by: default avatarBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: default avatarPing Cheng <pingc@wacom.com>
Reviewed-by: default avatarJason Gerecke <killertofu@gmail.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 422b0314
......@@ -262,6 +262,7 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
struct input_dev *input = wacom->input;
struct input_dev *pad_input = wacom->pad_input;
int prox;
int rw = 0;
int retval = 0;
......@@ -322,7 +323,6 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
wacom->id[0] = 0;
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
input_report_key(input, wacom->tool[0], prox);
input_event(input, EV_MSC, MSC_SERIAL, 1);
input_sync(input); /* sync last event */
}
......@@ -332,14 +332,13 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
prox = data[7] & 0xf8;
if (prox || wacom->id[1]) {
wacom->id[1] = PAD_DEVICE_ID;
input_report_key(input, BTN_BACK, (data[7] & 0x40));
input_report_key(input, BTN_FORWARD, (data[7] & 0x80));
input_report_key(pad_input, BTN_BACK, (data[7] & 0x40));
input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x80));
rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
input_report_rel(input, REL_WHEEL, rw);
input_report_rel(pad_input, REL_WHEEL, rw);
if (!prox)
wacom->id[1] = 0;
input_report_abs(input, ABS_MISC, wacom->id[1]);
input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
input_report_abs(pad_input, ABS_MISC, wacom->id[1]);
retval = 1;
}
break;
......@@ -348,15 +347,14 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
prox = (data[7] & 0xf8) || data[8];
if (prox || wacom->id[1]) {
wacom->id[1] = PAD_DEVICE_ID;
input_report_key(input, BTN_BACK, (data[7] & 0x08));
input_report_key(input, BTN_LEFT, (data[7] & 0x20));
input_report_key(input, BTN_FORWARD, (data[7] & 0x10));
input_report_key(input, BTN_RIGHT, (data[7] & 0x40));
input_report_abs(input, ABS_WHEEL, (data[8] & 0x7f));
input_report_key(pad_input, BTN_BACK, (data[7] & 0x08));
input_report_key(pad_input, BTN_LEFT, (data[7] & 0x20));
input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x10));
input_report_key(pad_input, BTN_RIGHT, (data[7] & 0x40));
input_report_abs(pad_input, ABS_WHEEL, (data[8] & 0x7f));
if (!prox)
wacom->id[1] = 0;
input_report_abs(input, ABS_MISC, wacom->id[1]);
input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
input_report_abs(pad_input, ABS_MISC, wacom->id[1]);
retval = 1;
}
break;
......@@ -1624,10 +1622,6 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
/* fall through */
case WACOM_G4:
input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
__set_bit(BTN_BACK, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
/* fall through */
case GRAPHIRE:
......@@ -1854,6 +1848,22 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0);
switch (features->type) {
case WACOM_MO:
__set_bit(BTN_BACK, input_dev->keybit);
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
break;
case WACOM_G4:
__set_bit(BTN_BACK, input_dev->keybit);
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
input_set_capability(input_dev, EV_REL, REL_WHEEL);
break;
case WACOM_24HD:
__set_bit(BTN_A, input_dev->keybit);
__set_bit(BTN_B, input_dev->keybit);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment