Commit 38355a5f authored by Ivan Mironov's avatar Ivan Mironov Committed by David S. Miller

bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw

This happened when I tried to boot normal Fedora 29 system with latest
available kernel (from fedora rawhide, plus some unrelated custom
patches):

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
	PGD 0 P4D 0
	Oops: 0010 [#1] SMP PTI
	CPU: 6 PID: 1422 Comm: libvirtd Tainted: G          I       4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1
	Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018
	RIP: 0010:          (null)
	Code: Bad RIP value.
	RSP: 0018:ffffa47ccdc9fbe0 EFLAGS: 00010246
	RAX: 0000000000000000 RBX: 00000000000003e8 RCX: ffffa47ccdc9fbf8
	RDX: ffffa47ccdc9fc00 RSI: ffff97d9ee7b01f8 RDI: ffff97d9f0150b80
	RBP: ffff97d9f0150b80 R08: 0000000000000000 R09: 0000000000000000
	R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
	R13: ffff97d9ef1e53e8 R14: 0000000000000009 R15: ffff97d9f0ac6730
	FS:  00007f4d224ef700(0000) GS:ffff97d9fa200000(0000) knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	CR2: ffffffffffffffd6 CR3: 00000011ece52006 CR4: 00000000000206e0
	Call Trace:
	 ? bnx2x_chip_cleanup+0x195/0x610 [bnx2x]
	 ? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x]
	 ? bnx2x_reload_if_running+0x24/0x40 [bnx2x]
	 ? bnx2x_set_features+0x79/0xa0 [bnx2x]
	 ? __netdev_update_features+0x244/0x9e0
	 ? netlink_broadcast_filtered+0x136/0x4b0
	 ? netdev_update_features+0x22/0x60
	 ? dev_disable_lro+0x1c/0xe0
	 ? devinet_sysctl_forward+0x1c6/0x211
	 ? proc_sys_call_handler+0xab/0x100
	 ? __vfs_write+0x36/0x1a0
	 ? rcu_read_lock_sched_held+0x79/0x80
	 ? rcu_sync_lockdep_assert+0x2e/0x60
	 ? __sb_start_write+0x14c/0x1b0
	 ? vfs_write+0x159/0x1c0
	 ? vfs_write+0xba/0x1c0
	 ? ksys_write+0x52/0xc0
	 ? do_syscall_64+0x60/0x1f0
	 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe

After some investigation I figured out that recently added cleanup code
tries to call VLAN filtering de-initialization function which exist only
for newer hardware. Corresponding function pointer is not
set (== 0) for older hardware, namely these chips:

	#define CHIP_NUM_57710			0x164e
	#define CHIP_NUM_57711			0x164f
	#define CHIP_NUM_57711E			0x1650

And I have one of those in my test system:

	Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650]

Function bnx2x_init_vlan_mac_fp_objs() from
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to
initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not.

This regression was introduced after v4.20-rc7, and still exists in v4.20
release.

Fixes: 04f05230 ("bnx2x: Remove configured vlans as part of unload sequence.")
Signed-off-by: default avatarIvan Mironov <mironov.ivan@gmail.com>
Signed-off-by: default avatarIvan Mironov <mironov.ivan@gmail.com>
Acked-by: default avatarSudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0eb987c8
......@@ -9360,10 +9360,16 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link)
BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n",
rc);
/* Remove all currently configured VLANs */
rc = bnx2x_del_all_vlans(bp);
if (rc < 0)
BNX2X_ERR("Failed to delete all VLANs\n");
/* The whole *vlan_obj structure may be not initialized if VLAN
* filtering offload is not supported by hardware. Currently this is
* true for all hardware covered by CHIP_IS_E1x().
*/
if (!CHIP_IS_E1x(bp)) {
/* Remove all currently configured VLANs */
rc = bnx2x_del_all_vlans(bp);
if (rc < 0)
BNX2X_ERR("Failed to delete all VLANs\n");
}
/* Disable LLH */
if (!CHIP_IS_E1(bp))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment