Commit 384ebe1c authored by Benoit Cousson's avatar Benoit Cousson

gpio/omap: Add DT support to GPIO driver

Adapt the GPIO driver to retrieve information from a DT file.

Allocate the irq_base dynamically and rename bank->virtual_irq_start
to bank->irq_base.
Change irq_base type to int instead of u16 to match irq_alloc_descs
output.

Add documentation for GPIO properties specific to OMAP.
Signed-off-by: default avatarBenoit Cousson <b-cousson@ti.com>
Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Acked-by: default avatarRob Herring <rob.herring@calxeda.com>
parent 96751fcb
OMAP GPIO controller bindings
Required properties:
- compatible:
- "ti,omap2-gpio" for OMAP2 controllers
- "ti,omap3-gpio" for OMAP3 controllers
- "ti,omap4-gpio" for OMAP4 controllers
- #gpio-cells : Should be two.
- first cell is the pin number
- second cell is used to specify optional parameters (unused)
- gpio-controller : Marks the device node as a GPIO controller.
- #interrupt-cells : Should be 2.
- interrupt-controller: Mark the device node as an interrupt controller
The first cell is the GPIO number.
The second cell is used to specify flags:
bits[3:0] trigger type and level flags:
1 = low-to-high edge triggered.
2 = high-to-low edge triggered.
4 = active high level-sensitive.
8 = active low level-sensitive.
OMAP specific properties:
- ti,hwmods: Name of the hwmod associated to the GPIO:
"gpio<X>", <X> being the 1-based instance number from the HW spec
Example:
gpio4: gpio4 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
...@@ -22,6 +22,9 @@ ...@@ -22,6 +22,9 @@
#include <linux/device.h> #include <linux/device.h>
#include <linux/pm_runtime.h> #include <linux/pm_runtime.h>
#include <linux/pm.h> #include <linux/pm.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/irqdomain.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <asm/irq.h> #include <asm/irq.h>
...@@ -52,7 +55,8 @@ struct gpio_bank { ...@@ -52,7 +55,8 @@ struct gpio_bank {
struct list_head node; struct list_head node;
void __iomem *base; void __iomem *base;
u16 irq; u16 irq;
u16 virtual_irq_start; int irq_base;
struct irq_domain *domain;
u32 suspend_wakeup; u32 suspend_wakeup;
u32 saved_wakeup; u32 saved_wakeup;
u32 non_wakeup_gpios; u32 non_wakeup_gpios;
...@@ -669,7 +673,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) ...@@ -669,7 +673,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
if (!isr) if (!isr)
break; break;
gpio_irq = bank->virtual_irq_start; gpio_irq = bank->irq_base;
for (; isr != 0; isr >>= 1, gpio_irq++) { for (; isr != 0; isr >>= 1, gpio_irq++) {
gpio_index = GPIO_INDEX(bank, irq_to_gpio(gpio_irq)); gpio_index = GPIO_INDEX(bank, irq_to_gpio(gpio_irq));
...@@ -915,7 +919,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset) ...@@ -915,7 +919,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
struct gpio_bank *bank; struct gpio_bank *bank;
bank = container_of(chip, struct gpio_bank, chip); bank = container_of(chip, struct gpio_bank, chip);
return bank->virtual_irq_start + offset; return bank->irq_base + offset;
} }
/*---------------------------------------------------------------------*/ /*---------------------------------------------------------------------*/
...@@ -1028,8 +1032,7 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) ...@@ -1028,8 +1032,7 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
gpiochip_add(&bank->chip); gpiochip_add(&bank->chip);
for (j = bank->virtual_irq_start; for (j = bank->irq_base; j < bank->irq_base + bank->width; j++) {
j < bank->virtual_irq_start + bank->width; j++) {
irq_set_lockdep_class(j, &gpio_lock_class); irq_set_lockdep_class(j, &gpio_lock_class);
irq_set_chip_data(j, bank); irq_set_chip_data(j, bank);
if (bank->is_mpuio) { if (bank->is_mpuio) {
...@@ -1044,15 +1047,22 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) ...@@ -1044,15 +1047,22 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
irq_set_handler_data(bank->irq, bank); irq_set_handler_data(bank->irq, bank);
} }
static const struct of_device_id omap_gpio_match[];
static int __devinit omap_gpio_probe(struct platform_device *pdev) static int __devinit omap_gpio_probe(struct platform_device *pdev)
{ {
struct device *dev = &pdev->dev; struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
const struct of_device_id *match;
struct omap_gpio_platform_data *pdata; struct omap_gpio_platform_data *pdata;
struct resource *res; struct resource *res;
struct gpio_bank *bank; struct gpio_bank *bank;
int ret = 0; int ret = 0;
if (!dev->platform_data) match = of_match_device(of_match_ptr(omap_gpio_match), dev);
pdata = match ? match->data : dev->platform_data;
if (!pdata)
return -EINVAL; return -EINVAL;
bank = devm_kzalloc(&pdev->dev, sizeof(struct gpio_bank), GFP_KERNEL); bank = devm_kzalloc(&pdev->dev, sizeof(struct gpio_bank), GFP_KERNEL);
...@@ -1068,9 +1078,6 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) ...@@ -1068,9 +1078,6 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
} }
bank->irq = res->start; bank->irq = res->start;
pdata = pdev->dev.platform_data;
bank->virtual_irq_start = pdata->virtual_irq_start;
bank->dev = dev; bank->dev = dev;
bank->dbck_flag = pdata->dbck_flag; bank->dbck_flag = pdata->dbck_flag;
bank->stride = pdata->bank_stride; bank->stride = pdata->bank_stride;
...@@ -1080,6 +1087,18 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) ...@@ -1080,6 +1087,18 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
bank->loses_context = pdata->loses_context; bank->loses_context = pdata->loses_context;
bank->get_context_loss_count = pdata->get_context_loss_count; bank->get_context_loss_count = pdata->get_context_loss_count;
bank->regs = pdata->regs; bank->regs = pdata->regs;
#ifdef CONFIG_OF_GPIO
bank->chip.of_node = of_node_get(node);
#endif
bank->irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
if (bank->irq_base < 0) {
dev_err(dev, "Couldn't allocate IRQ numbers\n");
return -ENODEV;
}
bank->domain = irq_domain_add_legacy(node, bank->width, bank->irq_base,
0, &irq_domain_simple_ops, NULL);
if (bank->regs->set_dataout && bank->regs->clr_dataout) if (bank->regs->set_dataout && bank->regs->clr_dataout)
bank->set_dataout = _set_gpio_dataout_reg; bank->set_dataout = _set_gpio_dataout_reg;
...@@ -1387,11 +1406,95 @@ static const struct dev_pm_ops gpio_pm_ops = { ...@@ -1387,11 +1406,95 @@ static const struct dev_pm_ops gpio_pm_ops = {
NULL) NULL)
}; };
#if defined(CONFIG_OF)
static struct omap_gpio_reg_offs omap2_gpio_regs = {
.revision = OMAP24XX_GPIO_REVISION,
.direction = OMAP24XX_GPIO_OE,
.datain = OMAP24XX_GPIO_DATAIN,
.dataout = OMAP24XX_GPIO_DATAOUT,
.set_dataout = OMAP24XX_GPIO_SETDATAOUT,
.clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT,
.irqstatus = OMAP24XX_GPIO_IRQSTATUS1,
.irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2,
.irqenable = OMAP24XX_GPIO_IRQENABLE1,
.irqenable2 = OMAP24XX_GPIO_IRQENABLE2,
.set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1,
.clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1,
.debounce = OMAP24XX_GPIO_DEBOUNCE_VAL,
.debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN,
.ctrl = OMAP24XX_GPIO_CTRL,
.wkup_en = OMAP24XX_GPIO_WAKE_EN,
.leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0,
.leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1,
.risingdetect = OMAP24XX_GPIO_RISINGDETECT,
.fallingdetect = OMAP24XX_GPIO_FALLINGDETECT,
};
static struct omap_gpio_reg_offs omap4_gpio_regs = {
.revision = OMAP4_GPIO_REVISION,
.direction = OMAP4_GPIO_OE,
.datain = OMAP4_GPIO_DATAIN,
.dataout = OMAP4_GPIO_DATAOUT,
.set_dataout = OMAP4_GPIO_SETDATAOUT,
.clr_dataout = OMAP4_GPIO_CLEARDATAOUT,
.irqstatus = OMAP4_GPIO_IRQSTATUS0,
.irqstatus2 = OMAP4_GPIO_IRQSTATUS1,
.irqenable = OMAP4_GPIO_IRQSTATUSSET0,
.irqenable2 = OMAP4_GPIO_IRQSTATUSSET1,
.set_irqenable = OMAP4_GPIO_IRQSTATUSSET0,
.clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0,
.debounce = OMAP4_GPIO_DEBOUNCINGTIME,
.debounce_en = OMAP4_GPIO_DEBOUNCENABLE,
.ctrl = OMAP4_GPIO_CTRL,
.wkup_en = OMAP4_GPIO_IRQWAKEN0,
.leveldetect0 = OMAP4_GPIO_LEVELDETECT0,
.leveldetect1 = OMAP4_GPIO_LEVELDETECT1,
.risingdetect = OMAP4_GPIO_RISINGDETECT,
.fallingdetect = OMAP4_GPIO_FALLINGDETECT,
};
static struct omap_gpio_platform_data omap2_pdata = {
.regs = &omap2_gpio_regs,
.bank_width = 32,
.dbck_flag = false,
};
static struct omap_gpio_platform_data omap3_pdata = {
.regs = &omap2_gpio_regs,
.bank_width = 32,
.dbck_flag = true,
};
static struct omap_gpio_platform_data omap4_pdata = {
.regs = &omap4_gpio_regs,
.bank_width = 32,
.dbck_flag = true,
};
static const struct of_device_id omap_gpio_match[] = {
{
.compatible = "ti,omap4-gpio",
.data = &omap4_pdata,
},
{
.compatible = "ti,omap3-gpio",
.data = &omap3_pdata,
},
{
.compatible = "ti,omap2-gpio",
.data = &omap2_pdata,
},
{ },
};
MODULE_DEVICE_TABLE(of, omap_gpio_match);
#endif
static struct platform_driver omap_gpio_driver = { static struct platform_driver omap_gpio_driver = {
.probe = omap_gpio_probe, .probe = omap_gpio_probe,
.driver = { .driver = {
.name = "omap_gpio", .name = "omap_gpio",
.pm = &gpio_pm_ops, .pm = &gpio_pm_ops,
.of_match_table = of_match_ptr(omap_gpio_match),
}, },
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment