Commit 386f5fc9 authored by Daniel Golle's avatar Daniel Golle Committed by David S. Miller

dt-bindings: net: dsa: mediatek,mt7530: add mediatek,mt7988-switch

Add documentation for the built-in switch which can be found in the
MediaTek MT7988 SoC.
Signed-off-by: default avatarDaniel Golle <daniel@makrotopia.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 110c18bf
......@@ -11,16 +11,23 @@ maintainers:
- Landen Chao <Landen.Chao@mediatek.com>
- DENG Qingfang <dqfext@gmail.com>
- Sean Wang <sean.wang@mediatek.com>
- Daniel Golle <daniel@makrotopia.org>
description: |
There are two versions of MT7530, standalone and in a multi-chip module.
There are three versions of MT7530, standalone, in a multi-chip module and
built-into a SoC.
MT7530 is a part of the multi-chip module in MT7620AN, MT7620DA, MT7620DAN,
MT7620NN, MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs.
The MT7988 SoC comes with a built-in switch similar to MT7531 as well as four
Gigabit Ethernet PHYs. The switch registers are directly mapped into the SoC's
memory map rather than using MDIO. The switch got an internally connected 10G
CPU port and 4 user ports connected to the built-in Gigabit Ethernet PHYs.
MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs
and the switch registers are directly mapped into SoC's memory map rather than
using MDIO. The DSA driver currently doesn't support this.
using MDIO. The DSA driver currently doesn't support MT7620 variants.
There is only the standalone version of MT7531.
......@@ -81,6 +88,10 @@ properties:
Multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
const: mediatek,mt7621
- description:
Built-in switch of the MT7988 SoC
const: mediatek,mt7988-switch
reg:
maxItems: 1
......@@ -268,6 +279,17 @@ allOf:
required:
- mediatek,mcm
- if:
properties:
compatible:
const: mediatek,mt7988-switch
then:
$ref: "#/$defs/mt7530-dsa-port"
properties:
gpio-controller: false
mediatek,mcm: false
reset-names: false
unevaluatedProperties: false
examples:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment