Input: silead - Always support 10 fingers

When support for Silead touchscreens was orginal added some touchscreens
with older firmware versions only supported 5 fingers and this was made
the default requiring the setting of a "silead,max-fingers=10" uint32
device-property for all touchscreen models which do support 10 fingers.

There are very few models with the old 5 finger fw, so in practice the
setting of the "silead,max-fingers=10" is boilerplate which needs to
be copy and pasted to every touchscreen config.

Reporting that 10 fingers are supported on devices which only support
5 fingers doesn't cause any problems for userspace in practice, since
at max 4 finger gestures are supported anyways. Drop the max_fingers
configuration and simply always assume 10 fingers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240525193854.39130-2-hdegoede@redhat.com

drivers/input/touchscreen/silead.c

@@ -71,7 +71,6 @@ struct silead_ts_data {
 	struct regulator_bulk_data regulators[2];
 	char fw_name[64];
 	struct touchscreen_properties prop;
-	u32 max_fingers;
 	u32 chip_id;
 	struct input_mt_pos pos[SILEAD_MAX_FINGERS];
 	int slots[SILEAD_MAX_FINGERS];
@@ -136,7 +135,7 @@ static int silead_ts_request_input_dev(struct silead_ts_data *data)
 	touchscreen_parse_properties(data->input, true, &data->prop);
 	silead_apply_efi_fw_min_max(data);
 
-	input_mt_init_slots(data->input, data->max_fingers,
+	input_mt_init_slots(data->input, SILEAD_MAX_FINGERS,
 			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED |
 			    INPUT_MT_TRACK);
 
@@ -256,10 +255,10 @@ static void silead_ts_read_data(struct i2c_client *client)
 		return;
 	}
 
-	if (buf[0] > data->max_fingers) {
+	if (buf[0] > SILEAD_MAX_FINGERS) {
 		dev_warn(dev, "More touches reported then supported %d > %d\n",
-			 buf[0], data->max_fingers);
-		buf[0] = data->max_fingers;
+			 buf[0], SILEAD_MAX_FINGERS);
+		buf[0] = SILEAD_MAX_FINGERS;
 	}
 
 	if (silead_ts_handle_pen_data(data, buf))
@@ -315,7 +314,6 @@ static void silead_ts_read_data(struct i2c_client *client)
 
 static int silead_ts_init(struct i2c_client *client)
 {
-	struct silead_ts_data *data = i2c_get_clientdata(client);
 	int error;
 
 	error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET,
@@ -325,7 +323,7 @@ static int silead_ts_init(struct i2c_client *client)
 	usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
 
 	error = i2c_smbus_write_byte_data(client, SILEAD_REG_TOUCH_NR,
-					data->max_fingers);
+					  SILEAD_MAX_FINGERS);
 	if (error)
 		goto i2c_write_err;
 	usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
@@ -591,13 +589,6 @@ static void silead_ts_read_props(struct i2c_client *client)
 	const char *str;
 	int error;
 
-	error = device_property_read_u32(dev, "silead,max-fingers",
-					 &data->max_fingers);
-	if (error) {
-		dev_dbg(dev, "Max fingers read error %d\n", error);
-		data->max_fingers = 5; /* Most devices handle up-to 5 fingers */
-	}
-
 	error = device_property_read_string(dev, "firmware-name", &str);
 	if (!error)
 		snprintf(data->fw_name, sizeof(data->fw_name),