Commit 390d2d49 authored by Linus Walleij's avatar Linus Walleij Committed by Marc Zyngier

irqchip/faraday: Replace moxa with ftintc010

The Moxa Art interrupt controller is very very likely just an instance
of the Faraday FTINTC010 interrupt controller from Faraday Technology.
An indication would be its close association with the FA526 ARM core
and the fact that the register layout is the same.

The implementation in irq-moxart.c can probably be right off replaced
with the irq-ftintc010.c driver by adding a compatible string, selecting
this irqchip from the machine and run.

As a bonus we have an irqchip driver supporting high/low and
rising/falling edges for the Moxa Art, and shared code with the Gemini
platform.
Acked-by: default avatarOlof Johansson <olof@lixom.net>
Tested-by: default avatarJonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
parent d2d55ab8
...@@ -3,8 +3,8 @@ menuconfig ARCH_MOXART ...@@ -3,8 +3,8 @@ menuconfig ARCH_MOXART
depends on ARCH_MULTI_V4 depends on ARCH_MULTI_V4
select CPU_FA526 select CPU_FA526
select ARM_DMA_MEM_BUFFERABLE select ARM_DMA_MEM_BUFFERABLE
select FARADAY_FTINTC010
select MOXART_TIMER select MOXART_TIMER
select GENERIC_IRQ_CHIP
select GPIOLIB select GPIOLIB
select PHYLIB if NETDEVICES select PHYLIB if NETDEVICES
help help
......
...@@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o ...@@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o
obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o
obj-$(CONFIG_METAG) += irq-metag-ext.o obj-$(CONFIG_METAG) += irq-metag-ext.o
obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o
obj-$(CONFIG_ARCH_MOXART) += irq-moxart.o
obj-$(CONFIG_CLPS711X_IRQCHIP) += irq-clps711x.o obj-$(CONFIG_CLPS711X_IRQCHIP) += irq-clps711x.o
obj-$(CONFIG_OR1K_PIC) += irq-or1k-pic.o obj-$(CONFIG_OR1K_PIC) += irq-or1k-pic.o
obj-$(CONFIG_ORION_IRQCHIP) += irq-orion.o obj-$(CONFIG_ORION_IRQCHIP) += irq-orion.o
......
...@@ -190,3 +190,5 @@ IRQCHIP_DECLARE(faraday, "faraday,ftintc010", ...@@ -190,3 +190,5 @@ IRQCHIP_DECLARE(faraday, "faraday,ftintc010",
ft010_of_init_irq); ft010_of_init_irq);
IRQCHIP_DECLARE(gemini, "cortina,gemini-interrupt-controller", IRQCHIP_DECLARE(gemini, "cortina,gemini-interrupt-controller",
ft010_of_init_irq); ft010_of_init_irq);
IRQCHIP_DECLARE(moxa, "moxa,moxart-ic",
ft010_of_init_irq);
/*
* MOXA ART SoCs IRQ chip driver.
*
* Copyright (C) 2013 Jonas Jensen
*
* Jonas Jensen <jonas.jensen@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/irqdomain.h>
#include <asm/exception.h>
#define IRQ_SOURCE_REG 0
#define IRQ_MASK_REG 0x04
#define IRQ_CLEAR_REG 0x08
#define IRQ_MODE_REG 0x0c
#define IRQ_LEVEL_REG 0x10
#define IRQ_STATUS_REG 0x14
#define FIQ_SOURCE_REG 0x20
#define FIQ_MASK_REG 0x24
#define FIQ_CLEAR_REG 0x28
#define FIQ_MODE_REG 0x2c
#define FIQ_LEVEL_REG 0x30
#define FIQ_STATUS_REG 0x34
struct moxart_irq_data {
void __iomem *base;
struct irq_domain *domain;
unsigned int interrupt_mask;
};
static struct moxart_irq_data intc;
static void __exception_irq_entry handle_irq(struct pt_regs *regs)
{
u32 irqstat;
int hwirq;
irqstat = readl(intc.base + IRQ_STATUS_REG);
while (irqstat) {
hwirq = ffs(irqstat) - 1;
handle_IRQ(irq_linear_revmap(intc.domain, hwirq), regs);
irqstat &= ~(1 << hwirq);
}
}
static int __init moxart_of_intc_init(struct device_node *node,
struct device_node *parent)
{
unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
int ret;
struct irq_chip_generic *gc;
intc.base = of_iomap(node, 0);
if (!intc.base) {
pr_err("%s: unable to map IC registers\n",
node->full_name);
return -EINVAL;
}
intc.domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops,
intc.base);
if (!intc.domain) {
pr_err("%s: unable to create IRQ domain\n", node->full_name);
return -EINVAL;
}
ret = irq_alloc_domain_generic_chips(intc.domain, 32, 1,
"MOXARTINTC", handle_edge_irq,
clr, 0, IRQ_GC_INIT_MASK_CACHE);
if (ret) {
pr_err("%s: could not allocate generic chip\n",
node->full_name);
irq_domain_remove(intc.domain);
return -EINVAL;
}
ret = of_property_read_u32(node, "interrupt-mask",
&intc.interrupt_mask);
if (ret)
pr_err("%s: could not read interrupt-mask DT property\n",
node->full_name);
gc = irq_get_domain_generic_chip(intc.domain, 0);
gc->reg_base = intc.base;
gc->chip_types[0].regs.mask = IRQ_MASK_REG;
gc->chip_types[0].regs.ack = IRQ_CLEAR_REG;
gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
writel(0, intc.base + IRQ_MASK_REG);
writel(0xffffffff, intc.base + IRQ_CLEAR_REG);
writel(intc.interrupt_mask, intc.base + IRQ_MODE_REG);
writel(intc.interrupt_mask, intc.base + IRQ_LEVEL_REG);
set_handle_irq(handle_irq);
return 0;
}
IRQCHIP_DECLARE(moxa_moxart_ic, "moxa,moxart-ic", moxart_of_intc_init);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment