Commit 39331a49 authored by Grygorii Strashko's avatar Grygorii Strashko Committed by David S. Miller

ARM: dts: dra7: add dt nodes for new cpsw switch dev driver

Add DT nodes for new cpsw switch dev driver.
Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 14c815a9
...@@ -3079,6 +3079,58 @@ cpsw_emac1: slave@300 { ...@@ -3079,6 +3079,58 @@ cpsw_emac1: slave@300 {
phys = <&phy_gmii_sel 2>; phys = <&phy_gmii_sel 2>;
}; };
}; };
mac_sw: switch@0 {
compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
reg = <0x0 0x4000>;
ranges = <0 0 0x4000>;
clocks = <&gmac_main_clk>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
syscon = <&scm_conf>;
status = "disabled";
interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "rx_thresh", "rx", "tx", "misc";
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
cpsw_port1: port@1 {
reg = <1>;
label = "port1";
mac-address = [ 00 00 00 00 00 00 ];
phys = <&phy_gmii_sel 1>;
};
cpsw_port2: port@2 {
reg = <2>;
label = "port2";
mac-address = [ 00 00 00 00 00 00 ];
phys = <&phy_gmii_sel 2>;
};
};
davinci_mdio_sw: mdio@1000 {
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
clocks = <&gmac_main_clk>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <0>;
bus_freq = <1000000>;
reg = <0x1000 0x100>;
};
cpts {
clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
clock-names = "cpts";
};
};
}; };
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment