mm: lift the x86_32 PAE version of gup_get_pte to common code

The split low/high access is the only non-READ_ONCE version of gup_get_pte
that did show up in the various arch implemenations.  Lift it to common
code and drop the ifdef based arch override.

Link: http://lkml.kernel.org/r/20190625143715.1689-4-hch@lst.deSigned-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: James Hogan <jhogan@kernel.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/x86/Kconfig

@@ -123,6 +123,7 @@ config X86
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_GETTIMEOFDAY
+	select GUP_GET_PTE_LOW_HIGH		if X86_PAE
 	select HARDLOCKUP_CHECK_TIMESTAMP	if X86_64
 	select HAVE_ACPI_APEI			if ACPI
 	select HAVE_ACPI_APEI_NMI		if ACPI

arch/x86/include/asm/pgtable-3level.h

@@ -285,53 +285,6 @@ static inline pud_t native_pudp_get_and_clear(pud_t *pudp)
 #define __pte_to_swp_entry(pte)	(__swp_entry(__pteval_swp_type(pte), \
 					     __pteval_swp_offset(pte)))
 
-#define gup_get_pte gup_get_pte
-/*
- * WARNING: only to be used in the get_user_pages_fast() implementation.
- *
- * With get_user_pages_fast(), we walk down the pagetables without taking
- * any locks.  For this we would like to load the pointers atomically,
- * but that is not possible (without expensive cmpxchg8b) on PAE.  What
- * we do have is the guarantee that a PTE will only either go from not
- * present to present, or present to not present or both -- it will not
- * switch to a completely different present page without a TLB flush in
- * between; something that we are blocking by holding interrupts off.
- *
- * Setting ptes from not present to present goes:
- *
- *   ptep->pte_high = h;
- *   smp_wmb();
- *   ptep->pte_low = l;
- *
- * And present to not present goes:
- *
- *   ptep->pte_low = 0;
- *   smp_wmb();
- *   ptep->pte_high = 0;
- *
- * We must ensure here that the load of pte_low sees 'l' iff pte_high
- * sees 'h'. We load pte_high *after* loading pte_low, which ensures we
- * don't see an older value of pte_high.  *Then* we recheck pte_low,
- * which ensures that we haven't picked up a changed pte high. We might
- * have gotten rubbish values from pte_low and pte_high, but we are
- * guaranteed that pte_low will not have the present bit set *unless*
- * it is 'l'. Because get_user_pages_fast() only operates on present ptes
- * we're safe.
- */
-static inline pte_t gup_get_pte(pte_t *ptep)
-{
-	pte_t pte;
-
-	do {
-		pte.pte_low = ptep->pte_low;
-		smp_rmb();
-		pte.pte_high = ptep->pte_high;
-		smp_rmb();
-	} while (unlikely(pte.pte_low != ptep->pte_low));
-
-	return pte;
-}
-
 #include <asm/pgtable-invert.h>
 
 #endif /* _ASM_X86_PGTABLE_3LEVEL_H */

arch/x86/kvm/mmu.c

@@ -650,7 +650,7 @@ static u64 __update_clear_spte_slow(u64 *sptep, u64 spte)
 
 /*
  * The idea using the light way get the spte on x86_32 guest is from
- * gup_get_pte(arch/x86/mm/gup.c).
+ * gup_get_pte (mm/gup.c).
  *
  * An spte tlb flush may be pending, because kvm_set_pte_rmapp
  * coalesces them and we are running out of the MMU lock.  Therefore

mm/Kconfig

@@ -762,6 +762,9 @@ config GUP_BENCHMARK
 
 	  See tools/testing/selftests/vm/gup_benchmark.c
 
+config GUP_GET_PTE_LOW_HIGH
+	bool
+
 config ARCH_HAS_PTE_SPECIAL
 	bool
 

mm/gup.c

@@ -1684,17 +1684,60 @@ struct page *get_dump_page(unsigned long addr)
  * This code is based heavily on the PowerPC implementation by Nick Piggin.
  */
 #ifdef CONFIG_HAVE_GENERIC_GUP
+#ifdef CONFIG_GUP_GET_PTE_LOW_HIGH
+/*
+ * WARNING: only to be used in the get_user_pages_fast() implementation.
+ *
+ * With get_user_pages_fast(), we walk down the pagetables without taking any
+ * locks.  For this we would like to load the pointers atomically, but sometimes
+ * that is not possible (e.g. without expensive cmpxchg8b on x86_32 PAE).  What
+ * we do have is the guarantee that a PTE will only either go from not present
+ * to present, or present to not present or both -- it will not switch to a
+ * completely different present page without a TLB flush in between; something
+ * that we are blocking by holding interrupts off.
+ *
+ * Setting ptes from not present to present goes:
+ *
+ *   ptep->pte_high = h;
+ *   smp_wmb();
+ *   ptep->pte_low = l;
+ *
+ * And present to not present goes:
+ *
+ *   ptep->pte_low = 0;
+ *   smp_wmb();
+ *   ptep->pte_high = 0;
+ *
+ * We must ensure here that the load of pte_low sees 'l' IFF pte_high sees 'h'.
+ * We load pte_high *after* loading pte_low, which ensures we don't see an older
+ * value of pte_high.  *Then* we recheck pte_low, which ensures that we haven't
+ * picked up a changed pte high. We might have gotten rubbish values from
+ * pte_low and pte_high, but we are guaranteed that pte_low will not have the
+ * present bit set *unless* it is 'l'. Because get_user_pages_fast() only
+ * operates on present ptes we're safe.
+ */
+static inline pte_t gup_get_pte(pte_t *ptep)
+{
+	pte_t pte;
 
-#ifndef gup_get_pte
+	do {
+		pte.pte_low = ptep->pte_low;
+		smp_rmb();
+		pte.pte_high = ptep->pte_high;
+		smp_rmb();
+	} while (unlikely(pte.pte_low != ptep->pte_low));
+
+	return pte;
+}
+#else /* CONFIG_GUP_GET_PTE_LOW_HIGH */
 /*
- * We assume that the PTE can be read atomically. If this is not the case for
- * your architecture, please provide the helper.
+ * We require that the PTE can be read atomically.
  */
 static inline pte_t gup_get_pte(pte_t *ptep)
 {
 	return READ_ONCE(*ptep);
 }
-#endif
+#endif /* CONFIG_GUP_GET_PTE_LOW_HIGH */
 
 static void undo_dev_pagemap(int *nr, int nr_start, struct page **pages)
 {