Commit 3995eb82 authored by Shawn Guo's avatar Shawn Guo

ARM: imx: merge plat-mxc into mach-imx

It's really unnecessary to have plat-mxc, and let's merge it into
mach-imx.  It's pretty much just a bunch of file renaming and
Kconfig/Makefile merge.

To make the change less invasive, we keep using Kconfig symbol
CONFIG_ARCH_MXC for mach-imx sub-architecture.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
Acked-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
parent e0557c0d
...@@ -789,7 +789,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) ...@@ -789,7 +789,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained S: Maintained
T: git git://git.pengutronix.de/git/imx/linux-2.6.git T: git git://git.pengutronix.de/git/imx/linux-2.6.git
F: arch/arm/mach-imx/ F: arch/arm/mach-imx/
F: arch/arm/plat-mxc/
F: arch/arm/configs/imx*_defconfig F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE IMX6 ARM/FREESCALE IMX6
......
...@@ -1058,7 +1058,7 @@ source "arch/arm/mach-msm/Kconfig" ...@@ -1058,7 +1058,7 @@ source "arch/arm/mach-msm/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig" source "arch/arm/mach-mv78xx0/Kconfig"
source "arch/arm/plat-mxc/Kconfig" source "arch/arm/mach-imx/Kconfig"
source "arch/arm/mach-mxs/Kconfig" source "arch/arm/mach-mxs/Kconfig"
......
...@@ -195,7 +195,6 @@ machine-$(CONFIG_ARCH_ZYNQ) += zynq ...@@ -195,7 +195,6 @@ machine-$(CONFIG_ARCH_ZYNQ) += zynq
# Platform directory name. This list is sorted alphanumerically # Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name. # by CONFIG_* macro name.
plat-$(CONFIG_ARCH_MXC) += mxc
plat-$(CONFIG_ARCH_OMAP) += omap plat-$(CONFIG_ARCH_OMAP) += omap
plat-$(CONFIG_ARCH_S3C64XX) += samsung plat-$(CONFIG_ARCH_S3C64XX) += samsung
plat-$(CONFIG_ARCH_ZYNQ) += versatile plat-$(CONFIG_ARCH_ZYNQ) += versatile
......
if ARCH_MXC
config MXC_IRQ_PRIOR
bool "Use IRQ priority"
help
Select this if you want to use prioritized IRQ handling.
This feature prevents higher priority ISR to be interrupted
by lower priority IRQ even IRQF_DISABLED flag is not set.
This may be useful in embedded applications, where are strong
requirements for timing.
Say N here, unless you have a specialized requirement.
config MXC_TZIC
bool
config MXC_AVIC
bool
config MXC_DEBUG_BOARD
bool "Enable MXC debug board(for 3-stack)"
help
The debug board is an integral part of the MXC 3-stack(PDK)
platforms, it can be attached or removed from the peripheral
board. On debug board, several debug devices(ethernet, UART,
buttons, LEDs and JTAG) are implemented. Between the MCU and
these devices, a CPLD is added as a bridge which performs
data/address de-multiplexing and decode, signal level shift,
interrupt control and various board functions.
config HAVE_EPIT
bool
config MXC_USE_EPIT
bool "Use EPIT instead of GPT"
depends on HAVE_EPIT
help
Use EPIT as the system timer on systems that have it. Normally you
don't have a reason to do so as the EPIT has the same features and
uses the same clocks as the GPT. Anyway, on some systems the GPT
may be in use for other purposes.
config MXC_ULPI
bool
config ARCH_HAS_RNGA
bool
config IRAM_ALLOC
bool
select GENERIC_ALLOCATOR
config HAVE_IMX_GPC config HAVE_IMX_GPC
bool bool
...@@ -110,6 +161,20 @@ config SOC_IMX51 ...@@ -110,6 +161,20 @@ config SOC_IMX51
select PINCTRL_IMX51 select PINCTRL_IMX51
select SOC_IMX5 select SOC_IMX5
menu "Freescale MXC Implementations"
choice
prompt "Freescale CPU family:"
default ARCH_IMX_V6_V7
config ARCH_IMX_V4_V5
bool "i.MX1, i.MX21, i.MX25, i.MX27"
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR if !ZBOOT_ROM
help
This enables support for systems based on the Freescale i.MX ARMv4
and ARMv5 SoCs
if ARCH_IMX_V4_V5 if ARCH_IMX_V4_V5
comment "MX1 platforms:" comment "MX1 platforms:"
...@@ -390,6 +455,15 @@ config MACH_IMX27_DT ...@@ -390,6 +455,15 @@ config MACH_IMX27_DT
endif endif
config ARCH_IMX_V6_V7
bool "i.MX3, i.MX5, i.MX6"
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR if !ZBOOT_ROM
select MIGHT_HAVE_CACHE_L2X0
help
This enables support for systems based on the Freescale i.MX3, i.MX5
and i.MX6 family.
if ARCH_IMX_V6_V7 if ARCH_IMX_V6_V7
comment "MX31 platforms:" comment "MX31 platforms:"
...@@ -773,4 +847,10 @@ config SOC_IMX6Q ...@@ -773,4 +847,10 @@ config SOC_IMX6Q
endif endif
endchoice
endmenu
source "arch/arm/mach-imx/devices/Kconfig" source "arch/arm/mach-imx/devices/Kconfig"
endif
obj-y := time.o cpu.o system.o irq-common.o
obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
...@@ -18,6 +20,21 @@ obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ ...@@ -18,6 +20,21 @@ obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
ifdef CONFIG_SND_IMX_SOC
obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o
endif
# Support for CMOS sensor interface # Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
......
if ARCH_MXC
menu "Freescale MXC Implementations"
choice
prompt "Freescale CPU family:"
default ARCH_IMX_V6_V7
config ARCH_IMX_V4_V5
bool "i.MX1, i.MX21, i.MX25, i.MX27"
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR if !ZBOOT_ROM
help
This enables support for systems based on the Freescale i.MX ARMv4
and ARMv5 SoCs
config ARCH_IMX_V6_V7
bool "i.MX3, i.MX5, i.MX6"
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR if !ZBOOT_ROM
select MIGHT_HAVE_CACHE_L2X0
help
This enables support for systems based on the Freescale i.MX3, i.MX5
and i.MX6 family.
endchoice
source "arch/arm/mach-imx/Kconfig"
endmenu
config MXC_IRQ_PRIOR
bool "Use IRQ priority"
help
Select this if you want to use prioritized IRQ handling.
This feature prevents higher priority ISR to be interrupted
by lower priority IRQ even IRQF_DISABLED flag is not set.
This may be useful in embedded applications, where are strong
requirements for timing.
Say N here, unless you have a specialized requirement.
config MXC_TZIC
bool
config MXC_AVIC
bool
config MXC_DEBUG_BOARD
bool "Enable MXC debug board(for 3-stack)"
help
The debug board is an integral part of the MXC 3-stack(PDK)
platforms, it can be attached or removed from the peripheral
board. On debug board, several debug devices(ethernet, UART,
buttons, LEDs and JTAG) are implemented. Between the MCU and
these devices, a CPLD is added as a bridge which performs
data/address de-multiplexing and decode, signal level shift,
interrupt control and various board functions.
config HAVE_EPIT
bool
config MXC_USE_EPIT
bool "Use EPIT instead of GPT"
depends on HAVE_EPIT
help
Use EPIT as the system timer on systems that have it. Normally you
don't have a reason to do so as the EPIT has the same features and
uses the same clocks as the GPT. Anyway, on some systems the GPT
may be in use for other purposes.
config MXC_ULPI
bool
config ARCH_HAS_RNGA
bool
config IRAM_ALLOC
bool
select GENERIC_ALLOCATOR
endif
#
# Makefile for the linux kernel.
#
# Common support
obj-y := time.o cpu.o system.o irq-common.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
ifdef CONFIG_SND_IMX_SOC
obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o
endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment