Merge tag 'v5.8-next-dts64' of...

Merge tag 'v5.8-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt8173:
- update dmips for Cortex A53

mt8183:
- add pericfg
- fix unit names
- add nodes for USB support
- add basic support for Lenovo IdeaPad Duet 10.1" Chromebook

* tag 'v5.8-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: mt8183: Add krane-sku176 board
  arm64: dts: mt8183: Add USB3.0 support
  arm64: dts: mt8183-evb: Fix unit name warnings
  arm64: dts: mt8183: Fix unit name warnings
  arm64: dts: mt8183: Add MediaTek's peripheral configuration controller
  arm64: dts: mt6358: Add the compatible for the regulators
  dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-krane-sku176
  arm64: dts: mt8173: Re-measure capacity-dmips-mhz

Link: https://lore.kernel.org/r/0b7109c7-7bd2-7373-6032-e9a452d2ebc9@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/mediatek.yaml

@@ -114,4 +114,9 @@ properties:
           - enum:
               - mediatek,mt8183-evb
           - const: mediatek,mt8183
+      - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
+        items:
+          - const: google,krane-sku176
+          - const: google,krane
+          - const: mediatek,mt8183
 ...

arch/arm64/boot/dts/mediatek/Makefile

@@ -11,4 +11,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb

arch/arm64/boot/dts/mediatek/mt6358.dtsi

@@ -16,6 +16,8 @@ mt6358codec: mt6358codec {
 		};
 
 		mt6358regulator: mt6358regulator {
+			compatible = "mediatek,mt6358-regulator";
+
 			mt6358_vdram1_reg: buck_vdram1 {
 				regulator-name = "vdram1";
 				regulator-min-microvolt = <500000>;

arch/arm64/boot/dts/mediatek/mt8173.dtsi

@@ -167,7 +167,7 @@ cpu0: cpu@0 {
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
-			capacity-dmips-mhz = <526>;
+			capacity-dmips-mhz = <740>;
 		};
 
 		cpu1: cpu@1 {
@@ -182,7 +182,7 @@ cpu1: cpu@1 {
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
-			capacity-dmips-mhz = <526>;
+			capacity-dmips-mhz = <740>;
 		};
 
 		cpu2: cpu@100 {

arch/arm64/boot/dts/mediatek/mt8183-evb.dts

@@ -205,7 +205,7 @@ pins_rst {
 		};
 	};
 
-	mmc0_pins_uhs: mmc0@0{
+	mmc0_pins_uhs: mmc0 {
 		pins_cmd_dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
@@ -264,7 +264,7 @@ pins_pmu {
 		};
 	};
 
-	mmc1_pins_uhs: mmc1@0{
+	mmc1_pins_uhs: mmc1 {
 		pins_cmd_dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				   <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,

arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts

+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Device-tree for Krane sku176.
+ *
+ * SKU is a 8-bit value (0xb0 == 176):
+ *  - Bits 7..4: Panel ID: 0xb (BOE)
+ *  - Bits 3..0: SKU ID:   0x0 (default)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-krane.dtsi"
+
+/ {
+	model = "MediaTek krane sku176 board";
+	compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
+};

arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi

+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include "mt8183-kukui.dtsi"
+
+/ {
+	ppvarn_lcd: ppvarn-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarn_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarn_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 66 GPIO_ACTIVE_HIGH>;
+	};
+
+	ppvarp_lcd: ppvarp-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarp_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarp_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 166 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp1800_lcd: pp1800-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bluetooth {
+	firmware-name = "nvm_00440302_i2s_eu.bin";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen4: touchscreen@5d {
+		compatible = "hid-over-i2c";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&mt6358_vcama2_reg {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@58 {
+		compatible = "atmel,24c32";
+		reg = <0x58>;
+		pagesize = <32>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@54 {
+		compatible = "atmel,24c32";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&pio {
+	/* 192 lines */
+	gpio-line-names =
+		"SPI_AP_EC_CS_L",
+		"SPI_AP_EC_MOSI",
+		"SPI_AP_EC_CLK",
+		"I2S3_DO",
+		"USB_PD_INT_ODL",
+		"",
+		"",
+		"",
+		"",
+		"IT6505_HPD_L",
+		"I2S3_TDM_D3",
+		"SOC_I2C6_1V8_SCL",
+		"SOC_I2C6_1V8_SDA",
+		"DPI_D0",
+		"DPI_D1",
+		"DPI_D2",
+		"DPI_D3",
+		"DPI_D4",
+		"DPI_D5",
+		"DPI_D6",
+		"DPI_D7",
+		"DPI_D8",
+		"DPI_D9",
+		"DPI_D10",
+		"DPI_D11",
+		"DPI_HSYNC",
+		"DPI_VSYNC",
+		"DPI_DE",
+		"DPI_CK",
+		"AP_MSDC1_CLK",
+		"AP_MSDC1_DAT3",
+		"AP_MSDC1_CMD",
+		"AP_MSDC1_DAT0",
+		"AP_MSDC1_DAT2",
+		"AP_MSDC1_DAT1",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"OTG_EN",
+		"DRVBUS",
+		"DISP_PWM",
+		"DSI_TE",
+		"LCM_RST_1V8",
+		"AP_CTS_WIFI_RTS",
+		"AP_RTS_WIFI_CTS",
+		"SOC_I2C5_1V8_SCL",
+		"SOC_I2C5_1V8_SDA",
+		"SOC_I2C3_1V8_SCL",
+		"SOC_I2C3_1V8_SDA",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SOC_I2C1_1V8_SDA",
+		"SOC_I2C0_1V8_SDA",
+		"SOC_I2C0_1V8_SCL",
+		"SOC_I2C1_1V8_SCL",
+		"AP_SPI_H1_MISO",
+		"AP_SPI_H1_CS_L",
+		"AP_SPI_H1_MOSI",
+		"AP_SPI_H1_CLK",
+		"I2S5_BCK",
+		"I2S5_LRCK",
+		"I2S5_DO",
+		"BOOTBLOCK_EN_L",
+		"MT8183_KPCOL0",
+		"SPI_AP_EC_MISO",
+		"UART_DBG_TX_AP_RX",
+		"UART_AP_TX_DBG_RX",
+		"I2S2_MCK",
+		"I2S2_BCK",
+		"CLK_5M_WCAM",
+		"CLK_2M_UCAM",
+		"I2S2_LRCK",
+		"I2S2_DI",
+		"SOC_I2C2_1V8_SCL",
+		"SOC_I2C2_1V8_SDA",
+		"SOC_I2C4_1V8_SCL",
+		"SOC_I2C4_1V8_SDA",
+		"",
+		"SCL8",
+		"SDA8",
+		"FCAM_PWDN_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+		 * call it BIOS_FLASH_WP_R_L.
+		 */
+		"AP_FLASH_WP_L",
+		"EC_AP_INT_ODL",
+		"IT6505_INT_ODL",
+		"H1_INT_OD_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_SPI_FLASH_MISO",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_CLK",
+		"DA7219_IRQ",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	ppvarp_lcd_en: ppvarp-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
+			output-low;
+		};
+	};
+
+	ppvarn_lcd_en: ppvarn-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-low;
+		};
+	};
+
+	pp1800_lcd_en: pp1800-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
+			output-low;
+		};
+	};
+
+	open_touch: open_touch {
+		irq_pin {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		rst_pin {
+			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
+
+			/*
+			 * The pen driver doesn't currently support  driving
+			 * this reset line.  By specifying output-high here
+			 * we're relying on the fact that this pin has a default
+			 * pulldown at boot (which makes sure the pen was in
+			 * reset if it was powered) and then we set it high here
+			 * to take it out of reset.  Better would be if the pen
+			 * driver could control this and we could remove
+			 * "output-high" here.
+			 */
+			output-high;
+		};
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "LE_Krane";
+};

arch/arm64/boot/dts/mediatek/mt8183.dtsi

@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/reset-controller/mt8183-resets.h>
+#include <dt-bindings/phy/phy.h>
 #include "mt8183-pinfunc.h"
 
 / {
@@ -168,7 +169,7 @@ CPU_SLEEP: cpu-sleep {
 				min-residency-us = <800>;
 			};
 
-			CLUSTER_SLEEP0: cluster-sleep@0 {
+			CLUSTER_SLEEP0: cluster-sleep-0 {
 				compatible = "arm,idle-state";
 				local-timer-stop;
 				arm,psci-suspend-param = <0x01010001>;
@@ -176,7 +177,7 @@ CLUSTER_SLEEP0: cluster-sleep@0 {
 				exit-latency-us = <400>;
 				min-residency-us = <1000>;
 			};
-			CLUSTER_SLEEP1: cluster-sleep@1 {
+			CLUSTER_SLEEP1: cluster-sleep-1 {
 				compatible = "arm,idle-state";
 				local-timer-stop;
 				arm,psci-suspend-param = <0x01010001>;
@@ -285,6 +286,12 @@ infracfg: syscon@10001000 {
 			#reset-cells = <1>;
 		};
 
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8183-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		pio: pinctrl@10005000 {
 			compatible = "mediatek,mt8183-pinctrl";
 			reg = <0 0x10005000 0 0x1000>,
@@ -642,6 +649,36 @@ i2c8: i2c@1101b000 {
 			status = "disabled";
 		};
 
+		ssusb: usb@11201000 {
+			compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+				 <&infracfg CLK_INFRA_USB>;
+			clock-names = "sys_ck", "ref_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: xhci@11200000 {
+				compatible = "mediatek,mt8183-xhci",
+					     "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+					 <&infracfg CLK_INFRA_USB>;
+				clock-names = "sys_ck", "ref_ck";
+				status = "disabled";
+			};
+		};
+
 		audiosys: syscon@11220000 {
 			compatible = "mediatek,mt8183-audiosys", "syscon";
 			reg = <0 0x11220000 0 0x1000>;
@@ -678,6 +715,33 @@ efuse: efuse@11f10000 {
 			reg = <0 0x11f10000 0 0x1000>;
 		};
 
+		u3phy: usb-phy@11f40000 {
+			compatible = "mediatek,mt8183-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#phy-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11f40000 0x1000>;
+			status = "okay";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				mediatek,discth = <15>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy@0700 {
+				reg = <0x0700 0x900>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
 		mfgcfg: syscon@13000000 {
 			compatible = "mediatek,mt8183-mfgcfg", "syscon";
 			reg = <0 0x13000000 0 0x1000>;