Commit 3a2824c7 authored by Stefan Brüns's avatar Stefan Brüns Committed by Mauro Carvalho Chehab

[media] si2157: Add support for Si2141-A10

The Si2141 needs two distinct commands for powerup/reset, otherwise it
will not respond to chip revision requests. It also needs a firmware
to run properly.

Cc: Evgeny Plehov <EvgenyPlehov@ukr.net>
Signed-off-by: default avatarStefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 297e14d5
......@@ -106,6 +106,9 @@ static int si2157_init(struct dvb_frontend *fe)
if (dev->chiptype == SI2157_CHIPTYPE_SI2146) {
memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9);
cmd.wlen = 9;
} else if (dev->chiptype == SI2157_CHIPTYPE_SI2141) {
memcpy(cmd.args, "\xc0\x00\x0d\x0e\x00\x01\x01\x01\x01\x03", 10);
cmd.wlen = 10;
} else {
memcpy(cmd.args, "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15);
cmd.wlen = 15;
......@@ -115,6 +118,15 @@ static int si2157_init(struct dvb_frontend *fe)
if (ret)
goto err;
/* Si2141 needs a second command before it answers the revision query */
if (dev->chiptype == SI2157_CHIPTYPE_SI2141) {
memcpy(cmd.args, "\xc0\x08\x01\x02\x00\x00\x01", 7);
cmd.wlen = 7;
ret = si2157_cmd_execute(client, &cmd);
if (ret)
goto err;
}
/* query chip revision */
memcpy(cmd.args, "\x02", 1);
cmd.wlen = 1;
......@@ -131,12 +143,16 @@ static int si2157_init(struct dvb_frontend *fe)
#define SI2157_A30 ('A' << 24 | 57 << 16 | '3' << 8 | '0' << 0)
#define SI2147_A30 ('A' << 24 | 47 << 16 | '3' << 8 | '0' << 0)
#define SI2146_A10 ('A' << 24 | 46 << 16 | '1' << 8 | '0' << 0)
#define SI2141_A10 ('A' << 24 | 41 << 16 | '1' << 8 | '0' << 0)
switch (chip_id) {
case SI2158_A20:
case SI2148_A20:
fw_name = SI2158_A20_FIRMWARE;
break;
case SI2141_A10:
fw_name = SI2141_A10_FIRMWARE;
break;
case SI2157_A30:
case SI2147_A30:
case SI2146_A10:
......@@ -371,7 +387,7 @@ static int si2157_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
static const struct dvb_tuner_ops si2157_ops = {
.info = {
.name = "Silicon Labs Si2146/2147/2148/2157/2158",
.name = "Silicon Labs Si2141/Si2146/2147/2148/2157/2158",
.frequency_min = 42000000,
.frequency_max = 870000000,
},
......@@ -471,6 +487,7 @@ static int si2157_probe(struct i2c_client *client,
#endif
dev_info(&client->dev, "Silicon Labs %s successfully attached\n",
dev->chiptype == SI2157_CHIPTYPE_SI2141 ? "Si2141" :
dev->chiptype == SI2157_CHIPTYPE_SI2146 ?
"Si2146" : "Si2147/2148/2157/2158");
......@@ -508,6 +525,7 @@ static int si2157_remove(struct i2c_client *client)
static const struct i2c_device_id si2157_id_table[] = {
{"si2157", SI2157_CHIPTYPE_SI2157},
{"si2146", SI2157_CHIPTYPE_SI2146},
{"si2141", SI2157_CHIPTYPE_SI2141},
{}
};
MODULE_DEVICE_TABLE(i2c, si2157_id_table);
......@@ -524,7 +542,8 @@ static struct i2c_driver si2157_driver = {
module_i2c_driver(si2157_driver);
MODULE_DESCRIPTION("Silicon Labs Si2146/2147/2148/2157/2158 silicon tuner driver");
MODULE_DESCRIPTION("Silicon Labs Si2141/Si2146/2147/2148/2157/2158 silicon tuner driver");
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(SI2158_A20_FIRMWARE);
MODULE_FIRMWARE(SI2141_A10_FIRMWARE);
......@@ -42,6 +42,7 @@ struct si2157_dev {
#define SI2157_CHIPTYPE_SI2157 0
#define SI2157_CHIPTYPE_SI2146 1
#define SI2157_CHIPTYPE_SI2141 2
/* firmware command struct */
#define SI2157_ARGLEN 30
......@@ -52,5 +53,6 @@ struct si2157_cmd {
};
#define SI2158_A20_FIRMWARE "dvb-tuner-si2158-a20-01.fw"
#define SI2141_A10_FIRMWARE "dvb-tuner-si2141-a10-01.fw"
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment