Merge branches 'clk-selectable', 'clk-amlogic', 'clk-renesas', 'clk-samsung'...

Merge branches 'clk-selectable', 'clk-amlogic', 'clk-renesas', 'clk-samsung' and 'clk-allwinner' into clk-next

 - Allow the COMMON_CLK config to be selectable

* clk-selectable:
  clk: Move HAVE_CLK config out of architecture layer
  MIPS: Loongson64: Drop asm/clock.h include
  ARM: mmp: Remove legacy clk code
  clk: Allow the common clk framework to be selectable
  mmc: meson-mx-sdio: Depend on OF_ADDRESS and not just OF
  MIPS: Remove redundant CLKDEV_LOOKUP selects
  h8300: Remove redundant CLKDEV_LOOKUP selects
  arm64: tegra: Remove redundant CLKDEV_LOOKUP selects
  ARM: Remove redundant CLKDEV_LOOKUP selects
  ARM: Remove redundant COMMON_CLK selects

* clk-amlogic:
  clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers
  clk: meson: meson8b: Make the CCF use the glitch-free VPU mux
  clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits
  clk: meson: meson8b: Fix the polarity of the RESET_N lines
  clk: meson: meson8b: Fix the first parent of vid_pll_in_sel
  clk: meson: g12a: Prepare the GPU clock tree to change at runtime
  clk: meson: gxbb: Prepare the GPU clock tree to change at runtime
  clk: meson: meson8b: make the hdmi_sys clock tree mutable
  clk: meson8b: export the HDMI system clock

* clk-renesas:
  dt-bindings: clock: renesas: mstp: Convert to json-schema
  dt-bindings: clock: renesas: div6: Convert to json-schema
  clk: renesas: cpg-mssr: Fix STBCR suspend/resume handling
  clk: renesas: rcar-gen2: Remove superfluous CLK_RENESAS_DIV6 selects
  clk: renesas: cpg-mssr: Add R8A7742 support
  dt-bindings: clock: renesas: cpg-mssr: Document r8a7742 binding
  clk: renesas: Add r8a7742 CPG Core Clock Definitions
  dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros
  MAINTAINERS: Add DT Bindings for Renesas Clock Generators
  clk: renesas: r9a06g032: Fix some typo in comments
  dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add r8a77961 support

* clk-samsung:
  clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1
  ARM/SAMSUNG EXYNOS ARM ARCHITECTURES: Use fallthrough;
  clk: samsung: Fix CLK_SMMU_FIMCL3 clock name on Exynos542x
  clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical

* clk-allwinner:
  clk: sunxi: Fix incorrect usage of round_down()

Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-div6-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas CPG DIV6 Clock
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse
+  Generator (CPG). Their clock input is divided by a configurable factor from 1
+  to 64.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a73a4-div6-clock # R-Mobile APE6
+          - renesas,r8a7740-div6-clock # R-Mobile A1
+          - renesas,sh73a0-div6-clock  # SH-Mobile AG5
+      - const: renesas,cpg-div6-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - maxItems: 1
+      - maxItems: 4
+      - maxItems: 8
+    description:
+      For clocks with multiple parents, invalid settings must be specified as
+      "<0>".
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a73a4-clock.h>
+    sdhi2_clk: sdhi2_clk@e615007c {
+            compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+            reg = <0xe615007c 4>;
+            clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>,
+                     <&extal2_clk>;
+            #clock-cells = <0>;
+    };

Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt

-* Renesas CPG DIV6 Clock
-
-The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse
-Generator (CPG). Their clock input is divided by a configurable factor from 1
-to 64.
-
-Required Properties:
-
-  - compatible: Must be one of the following
-    - "renesas,r8a73a4-div6-clock" for R8A73A4 (R-Mobile APE6) DIV6 clocks
-    - "renesas,r8a7740-div6-clock" for R8A7740 (R-Mobile A1) DIV6 clocks
-    - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks
-    - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2-W) DIV6 clocks
-    - "renesas,r8a7793-div6-clock" for R8A7793 (R-Car M2-N) DIV6 clocks
-    - "renesas,r8a7794-div6-clock" for R8A7794 (R-Car E2) DIV6 clocks
-    - "renesas,sh73a0-div6-clock" for SH73A0 (SH-Mobile AG5) DIV6 clocks
-    and "renesas,cpg-div6-clock" as a fallback.
-  - reg: Base address and length of the memory resource used by the DIV6 clock
-  - clocks: Reference to the parent clock(s); either one, four, or eight
-    clocks must be specified.  For clocks with multiple parents, invalid
-    settings must be specified as "<0>".
-  - #clock-cells: Must be 0
-
-
-Optional Properties:
-
-  - clock-output-names: The name of the clock as a free-form string
-
-
-Example
--------
-
-	sdhi2_clk: sdhi2_clk@e615007c {
-		compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-		reg = <0 0xe615007c 0 4>;
-		clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-			 <0>, <&extal2_clk>;
-		#clock-cells = <0>;
-		clock-output-names = "sdhi2ck";
-	};

Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml

@@ -25,6 +25,7 @@ properties:
   compatible:
     enum:
       - renesas,r7s9210-cpg-mssr  # RZ/A2
+      - renesas,r8a7742-cpg-mssr  # RZ/G1H
       - renesas,r8a7743-cpg-mssr  # RZ/G1M
       - renesas,r8a7744-cpg-mssr  # RZ/G1N
       - renesas,r8a7745-cpg-mssr  # RZ/G1E

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

-* Renesas CPG Module Stop (MSTP) Clocks
-
-The CPG can gate SoC device clocks. The gates are organized in groups of up to
-32 gates.
-
-This device tree binding describes a single 32 gate clocks group per node.
-Clocks are referenced by user nodes by the MSTP node phandle and the clock
-index in the group, from 0 to 31.
-
-Required Properties:
-
-  - compatible: Must be one of the following
-    - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
-    - "renesas,r8a73a4-mstp-clocks" for R8A73A4 (R-Mobile APE6) MSTP gate clocks
-    - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks
-    - "renesas,r8a7778-mstp-clocks" for R8A7778 (R-Car M1) MSTP gate clocks
-    - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
-    - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
-    - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2-W) MSTP gate clocks
-    - "renesas,r8a7792-mstp-clocks" for R8A7792 (R-Car V2H) MSTP gate clocks
-    - "renesas,r8a7793-mstp-clocks" for R8A7793 (R-Car M2-N) MSTP gate clocks
-    - "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks
-    - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks
-    and "renesas,cpg-mstp-clocks" as a fallback.
-  - reg: Base address and length of the I/O mapped registers used by the MSTP
-    clocks. The first register is the clock control register and is mandatory.
-    The second register is the clock status register and is optional when not
-    implemented in hardware.
-  - clocks: Reference to the parent clocks, one per output clock. The parents
-    must appear in the same order as the output clocks.
-  - #clock-cells: Must be 1
-  - clock-output-names: The name of the clocks as free-form strings
-  - clock-indices: Indices of the gate clocks into the group (0 to 31)
-
-The clocks, clock-output-names and clock-indices properties contain one entry
-per gate clock. The MSTP groups are sparsely populated. Unimplemented gate
-clocks must not be declared.
-
-
-Example
--------
-
-	#include <dt-bindings/clock/r8a7790-clock.h>
-
-	mstp3_clks: mstp3_clks@e615013c {
-		compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-		reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-		clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>,
-			 <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>,
-			 <&mmc0_clk>;
-		#clock-cells = <1>;
-		clock-output-names =
-			"tpu0", "mmcif1", "sdhi3", "sdhi2",
-			 "sdhi1", "sdhi0", "mmcif0";
-		clock-indices = <
-			R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
-			R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0
-			R8A7790_CLK_MMCIF0
-		>;
-	};

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-mstp-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Clock Pulse Generator (CPG) Module Stop (MSTP) Clocks
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Clock Pulse Generator (CPG) can gate SoC device clocks. The gates are
+  organized in groups of up to 32 gates.
+
+  This device tree binding describes a single 32 gate clocks group per node.
+  Clocks are referenced by user nodes by the Module Stop (MSTP) node phandle
+  and the clock index in the group, from 0 to 31.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r7s72100-mstp-clocks # RZ/A1
+          - renesas,r8a73a4-mstp-clocks  # R-Mobile APE6
+          - renesas,r8a7740-mstp-clocks  # R-Mobile A1
+          - renesas,r8a7778-mstp-clocks  # R-Car M1
+          - renesas,r8a7779-mstp-clocks  # R-Car H1
+          - renesas,sh73a0-mstp-clocks   # SH-Mobile AG5
+      - const: renesas,cpg-mstp-clocks
+
+  reg:
+    minItems: 1
+    items:
+      - description: Module Stop Control Register (MSTPCR)
+      - description: Module Stop Status Register (MSTPSR)
+
+  clocks:
+    minItems: 1
+    maxItems: 32
+
+  '#clock-cells':
+    const: 1
+
+  clock-indices:
+    minItems: 1
+    maxItems: 32
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - clock-indices
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a73a4-clock.h>
+    mstp2_clks: mstp2_clks@e6150138 {
+            compatible = "renesas,r8a73a4-mstp-clocks",
+                         "renesas,cpg-mstp-clocks";
+            reg = <0xe6150138 4>, <0xe6150040 4>;
+            clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+                     <&mp_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+            #clock-cells = <1>;
+            clock-indices = <
+                    R8A73A4_CLK_SCIFA0 R8A73A4_CLK_SCIFA1
+                    R8A73A4_CLK_SCIFB0 R8A73A4_CLK_SCIFB1
+                    R8A73A4_CLK_SCIFB2 R8A73A4_CLK_SCIFB3
+                    R8A73A4_CLK_DMAC
+            >;
+            clock-output-names =
+                    "scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifb3",
+                    "dmac";
+    };

Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt

@@ -27,7 +27,9 @@ Required properties:
 - compatible: "renesas,r8a7795-rcar-usb2-clock-sel" if the device is a part of
 	      an R8A7795 SoC.
 	      "renesas,r8a7796-rcar-usb2-clock-sel" if the device if a part of
-	      an R8A7796 SoC.
+	      an R8A77960 SoC.
+	      "renesas,r8a77961-rcar-usb2-clock-sel" if the device if a part of
+	      an R8A77961 SoC.
 	      "renesas,rcar-gen3-usb2-clock-sel" for a generic R-Car Gen3
 	      compatible device.
 

MAINTAINERS

@@ -14334,6 +14334,7 @@ M:	Geert Uytterhoeven <geert+renesas@glider.be>
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git clk-renesas
+F:	Documentation/devicetree/bindings/clock/renesas,*
 F:	drivers/clk/renesas/
 
 RENESAS EMEV2 I2C DRIVER

drivers/clk/meson/g12a.c

@@ -3702,7 +3702,9 @@ static struct clk_regmap g12a_hdmi = {
 
 /*
  * The MALI IP is clocked by two identical clocks (mali_0 and mali_1)
- * muxed by a glitch-free switch.
+ * muxed by a glitch-free switch. The CCF can manage this glitch-free
+ * mux because it does top-to-bottom updates the each clock tree and
+ * switches to the "inactive" one when CLK_SET_RATE_GATE is set.
  */
 static const struct clk_parent_data g12a_mali_0_1_parent_data[] = {
 	{ .fw_name = "xtal", },
@@ -3726,7 +3728,13 @@ static struct clk_regmap g12a_mali_0_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_data = g12a_mali_0_1_parent_data,
 		.num_parents = 8,
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		/*
+		 * Don't request the parent to change the rate because
+		 * all GPU frequencies can be derived from the fclk_*
+		 * clocks and one special GP0_PLL setting. This is
+		 * important because we need the MPLL clocks for audio.
+		 */
+		.flags = 0,
 	},
 };
 
@@ -3743,7 +3751,7 @@ static struct clk_regmap g12a_mali_0_div = {
 			&g12a_mali_0_sel.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3759,7 +3767,7 @@ static struct clk_regmap g12a_mali_0 = {
 			&g12a_mali_0_div.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT,
+		.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3774,7 +3782,13 @@ static struct clk_regmap g12a_mali_1_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_data = g12a_mali_0_1_parent_data,
 		.num_parents = 8,
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		/*
+		 * Don't request the parent to change the rate because
+		 * all GPU frequencies can be derived from the fclk_*
+		 * clocks and one special GP0_PLL setting. This is
+		 * important because we need the MPLL clocks for audio.
+		 */
+		.flags = 0,
 	},
 };
 
@@ -3791,7 +3805,7 @@ static struct clk_regmap g12a_mali_1_div = {
 			&g12a_mali_1_sel.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3807,7 +3821,7 @@ static struct clk_regmap g12a_mali_1 = {
 			&g12a_mali_1_div.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT,
+		.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3827,7 +3841,7 @@ static struct clk_regmap g12a_mali = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = g12a_mali_parent_hws,
 		.num_parents = 2,
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 

drivers/clk/meson/gxbb.c

@@ -957,7 +957,9 @@ static struct clk_regmap gxbb_sar_adc_clk = {
 
 /*
  * The MALI IP is clocked by two identical clocks (mali_0 and mali_1)
- * muxed by a glitch-free switch.
+ * muxed by a glitch-free switch. The CCF can manage this glitch-free
+ * mux because it does top-to-bottom updates the each clock tree and
+ * switches to the "inactive" one when CLK_SET_RATE_GATE is set.
  */
 
 static const struct clk_parent_data gxbb_mali_0_1_parent_data[] = {
@@ -980,14 +982,15 @@ static struct clk_regmap gxbb_mali_0_sel = {
 	.hw.init = &(struct clk_init_data){
 		.name = "mali_0_sel",
 		.ops = &clk_regmap_mux_ops,
-		/*
-		 * bits 10:9 selects from 8 possible parents:
-		 * xtal, gp0_pll, mpll2, mpll1, fclk_div7,
-		 * fclk_div4, fclk_div3, fclk_div5
-		 */
 		.parent_data = gxbb_mali_0_1_parent_data,
 		.num_parents = 8,
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		/*
+		 * Don't request the parent to change the rate because
+		 * all GPU frequencies can be derived from the fclk_*
+		 * clocks and one special GP0_PLL setting. This is
+		 * important because we need the MPLL clocks for audio.
+		 */
+		.flags = 0,
 	},
 };
 
@@ -1004,7 +1007,7 @@ static struct clk_regmap gxbb_mali_0_div = {
 			&gxbb_mali_0_sel.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -1020,7 +1023,7 @@ static struct clk_regmap gxbb_mali_0 = {
 			&gxbb_mali_0_div.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT,
+		.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -1033,14 +1036,15 @@ static struct clk_regmap gxbb_mali_1_sel = {
 	.hw.init = &(struct clk_init_data){
 		.name = "mali_1_sel",
 		.ops = &clk_regmap_mux_ops,
-		/*
-		 * bits 10:9 selects from 8 possible parents:
-		 * xtal, gp0_pll, mpll2, mpll1, fclk_div7,
-		 * fclk_div4, fclk_div3, fclk_div5
-		 */
 		.parent_data = gxbb_mali_0_1_parent_data,
 		.num_parents = 8,
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		/*
+		 * Don't request the parent to change the rate because
+		 * all GPU frequencies can be derived from the fclk_*
+		 * clocks and one special GP0_PLL setting. This is
+		 * important because we need the MPLL clocks for audio.
+		 */
+		.flags = 0,
 	},
 };
 
@@ -1057,7 +1061,7 @@ static struct clk_regmap gxbb_mali_1_div = {
 			&gxbb_mali_1_sel.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -1073,7 +1077,7 @@ static struct clk_regmap gxbb_mali_1 = {
 			&gxbb_mali_1_div.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT,
+		.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -1093,7 +1097,7 @@ static struct clk_regmap gxbb_mali = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = gxbb_mali_parent_hws,
 		.num_parents = 2,
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 

drivers/clk/meson/meson8b.c

@@ -1077,7 +1077,7 @@ static struct clk_regmap meson8b_vid_pll_in_sel = {
 		 * Meson8m2: vid2_pll
 		 */
 		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_hdmi_pll_dco.hw
+			&meson8b_hdmi_pll_lvds_out.hw
 		},
 		.num_parents = 1,
 		.flags = CLK_SET_RATE_PARENT,
@@ -1213,7 +1213,7 @@ static struct clk_regmap meson8b_vclk_in_en = {
 
 static struct clk_regmap meson8b_vclk_div1_gate = {
 	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VID_CLK_DIV,
+		.offset = HHI_VID_CLK_CNTL,
 		.bit_idx = 0,
 	},
 	.hw.init = &(struct clk_init_data){
@@ -1243,7 +1243,7 @@ static struct clk_fixed_factor meson8b_vclk_div2_div = {
 
 static struct clk_regmap meson8b_vclk_div2_div_gate = {
 	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VID_CLK_DIV,
+		.offset = HHI_VID_CLK_CNTL,
 		.bit_idx = 1,
 	},
 	.hw.init = &(struct clk_init_data){
@@ -1273,7 +1273,7 @@ static struct clk_fixed_factor meson8b_vclk_div4_div = {
 
 static struct clk_regmap meson8b_vclk_div4_div_gate = {
 	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VID_CLK_DIV,
+		.offset = HHI_VID_CLK_CNTL,
 		.bit_idx = 2,
 	},
 	.hw.init = &(struct clk_init_data){
@@ -1303,7 +1303,7 @@ static struct clk_fixed_factor meson8b_vclk_div6_div = {
 
 static struct clk_regmap meson8b_vclk_div6_div_gate = {
 	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VID_CLK_DIV,
+		.offset = HHI_VID_CLK_CNTL,
 		.bit_idx = 3,
 	},
 	.hw.init = &(struct clk_init_data){
@@ -1333,7 +1333,7 @@ static struct clk_fixed_factor meson8b_vclk_div12_div = {
 
 static struct clk_regmap meson8b_vclk_div12_div_gate = {
 	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VID_CLK_DIV,
+		.offset = HHI_VID_CLK_CNTL,
 		.bit_idx = 4,
 	},
 	.hw.init = &(struct clk_init_data){
@@ -1725,7 +1725,7 @@ static struct clk_regmap meson8b_hdmi_sys_sel = {
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "hdmi_sys_sel",
-		.ops = &clk_regmap_mux_ro_ops,
+		.ops = &clk_regmap_mux_ops,
 		/* FIXME: all other parents are unknown */
 		.parent_data = &(const struct clk_parent_data) {
 			.fw_name = "xtal",
@@ -1745,7 +1745,7 @@ static struct clk_regmap meson8b_hdmi_sys_div = {
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "hdmi_sys_div",
-		.ops = &clk_regmap_divider_ro_ops,
+		.ops = &clk_regmap_divider_ops,
 		.parent_hws = (const struct clk_hw *[]) {
 			&meson8b_hdmi_sys_sel.hw
 		},
@@ -1761,7 +1761,7 @@ static struct clk_regmap meson8b_hdmi_sys = {
 	},
 	.hw.init = &(struct clk_init_data) {
 		.name = "hdmi_sys",
-		.ops = &clk_regmap_gate_ro_ops,
+		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) {
 			&meson8b_hdmi_sys_div.hw
 		},
@@ -1918,6 +1918,13 @@ static struct clk_regmap meson8b_mali = {
 	},
 };
 
+static const struct reg_sequence meson8m2_gp_pll_init_regs[] = {
+	{ .reg = HHI_GP_PLL_CNTL2,	.def = 0x59c88000 },
+	{ .reg = HHI_GP_PLL_CNTL3,	.def = 0xca463823 },
+	{ .reg = HHI_GP_PLL_CNTL4,	.def = 0x0286a027 },
+	{ .reg = HHI_GP_PLL_CNTL5,	.def = 0x00003000 },
+};
+
 static const struct pll_params_table meson8m2_gp_pll_params_table[] = {
 	PLL_PARAMS(182, 3),
 	{ /* sentinel */ },
@@ -1951,6 +1958,8 @@ static struct clk_regmap meson8m2_gp_pll_dco = {
 			.width   = 1,
 		},
 		.table = meson8m2_gp_pll_params_table,
+		.init_regs = meson8m2_gp_pll_init_regs,
+		.init_count = ARRAY_SIZE(meson8m2_gp_pll_init_regs),
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "gp_pll_dco",
@@ -2063,7 +2072,7 @@ static struct clk_regmap meson8b_vpu_0 = {
 			&meson8b_vpu_0_div.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT,
+		.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -2134,10 +2143,18 @@ static struct clk_regmap meson8b_vpu_1 = {
 			&meson8b_vpu_1_div.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT,
+		.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT,
 	},
 };
 
+/*
+ * The VPU clock has two two identical clock trees (vpu_0 and vpu_1)
+ * muxed by a glitch-free switch on Meson8b and Meson8m2. The CCF can
+ * actually manage this glitch-free mux because it does top-to-bottom
+ * updates the each clock tree and switches to the "inactive" one when
+ * CLK_SET_RATE_GATE is set.
+ * Meson8 only has vpu_0 and no glitch-free mux.
+ */
 static struct clk_regmap meson8b_vpu = {
 	.data = &(struct clk_regmap_mux_data){
 		.offset = HHI_VPU_CLK_CNTL,
@@ -2152,7 +2169,7 @@ static struct clk_regmap meson8b_vpu = {
 			&meson8b_vpu_1.hw,
 		},
 		.num_parents = 2,
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3506,54 +3523,87 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
 static const struct meson8b_clk_reset_line {
 	u32 reg;
 	u8 bit_idx;
+	bool active_low;
 } meson8b_clk_reset_bits[] = {
 	[CLKC_RESET_L2_CACHE_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 30
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 30,
+		.active_low = false,
 	},
 	[CLKC_RESET_AXI_64_TO_128_BRIDGE_A5_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 29
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 29,
+		.active_low = false,
 	},
 	[CLKC_RESET_SCU_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 28
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 28,
+		.active_low = false,
 	},
 	[CLKC_RESET_CPU3_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 27
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 27,
+		.active_low = false,
 	},
 	[CLKC_RESET_CPU2_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 26
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 26,
+		.active_low = false,
 	},
 	[CLKC_RESET_CPU1_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 25
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 25,
+		.active_low = false,
 	},
 	[CLKC_RESET_CPU0_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 24
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 24,
+		.active_low = false,
 	},
 	[CLKC_RESET_A5_GLOBAL_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 18
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 18,
+		.active_low = false,
 	},
 	[CLKC_RESET_A5_AXI_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 17
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 17,
+		.active_low = false,
 	},
 	[CLKC_RESET_A5_ABP_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 16
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 16,
+		.active_low = false,
 	},
 	[CLKC_RESET_AXI_64_TO_128_BRIDGE_MMC_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL1, .bit_idx = 30
+		.reg = HHI_SYS_CPU_CLK_CNTL1,
+		.bit_idx = 30,
+		.active_low = false,
 	},
 	[CLKC_RESET_VID_CLK_CNTL_SOFT_RESET] = {
-		.reg = HHI_VID_CLK_CNTL, .bit_idx = 15
+		.reg = HHI_VID_CLK_CNTL,
+		.bit_idx = 15,
+		.active_low = false,
 	},
 	[CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_POST] = {
-		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 7
+		.reg = HHI_VID_DIVIDER_CNTL,
+		.bit_idx = 7,
+		.active_low = false,
 	},
 	[CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_PRE] = {
-		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 3
+		.reg = HHI_VID_DIVIDER_CNTL,
+		.bit_idx = 3,
+		.active_low = false,
 	},
 	[CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST] = {
-		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 1
+		.reg = HHI_VID_DIVIDER_CNTL,
+		.bit_idx = 1,
+		.active_low = true,
 	},
 	[CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE] = {
-		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 0
+		.reg = HHI_VID_DIVIDER_CNTL,
+		.bit_idx = 0,
+		.active_low = true,
 	},
 };
 
@@ -3562,22 +3612,22 @@ static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
 {
 	struct meson8b_clk_reset *meson8b_clk_reset =
 		container_of(rcdev, struct meson8b_clk_reset, reset);
-	unsigned long flags;
 	const struct meson8b_clk_reset_line *reset;
+	unsigned int value = 0;
+	unsigned long flags;
 
 	if (id >= ARRAY_SIZE(meson8b_clk_reset_bits))
 		return -EINVAL;
 
 	reset = &meson8b_clk_reset_bits[id];
 
+	if (assert != reset->active_low)
+		value = BIT(reset->bit_idx);
+
 	spin_lock_irqsave(&meson_clk_lock, flags);
 
-	if (assert)
-		regmap_update_bits(meson8b_clk_reset->regmap, reset->reg,
-				   BIT(reset->bit_idx), BIT(reset->bit_idx));
-	else
-		regmap_update_bits(meson8b_clk_reset->regmap, reset->reg,
-				   BIT(reset->bit_idx), 0);
+	regmap_update_bits(meson8b_clk_reset->regmap, reset->reg,
+			   BIT(reset->bit_idx), value);
 
 	spin_unlock_irqrestore(&meson_clk_lock, flags);
 

drivers/clk/meson/meson8b.h

@@ -20,6 +20,10 @@
  * [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
  */
 #define HHI_GP_PLL_CNTL			0x40  /* 0x10 offset in data sheet */
+#define HHI_GP_PLL_CNTL2		0x44  /* 0x11 offset in data sheet */
+#define HHI_GP_PLL_CNTL3		0x48  /* 0x12 offset in data sheet */
+#define HHI_GP_PLL_CNTL4		0x4C  /* 0x13 offset in data sheet */
+#define HHI_GP_PLL_CNTL5		0x50  /* 0x14 offset in data sheet */
 #define HHI_VIID_CLK_DIV		0x128 /* 0x4a offset in data sheet */
 #define HHI_VIID_CLK_CNTL		0x12c /* 0x4b offset in data sheet */
 #define HHI_GCLK_MPEG0			0x140 /* 0x50 offset in data sheet */
@@ -146,7 +150,6 @@
 #define CLKID_CTS_VDAC0		171
 #define CLKID_HDMI_SYS_SEL	172
 #define CLKID_HDMI_SYS_DIV	173
-#define CLKID_HDMI_SYS		174
 #define CLKID_MALI_0_SEL	175
 #define CLKID_MALI_0_DIV	176
 #define CLKID_MALI_0		177

drivers/clk/renesas/Kconfig

@@ -8,6 +8,7 @@ config CLK_RENESAS
 	select CLK_R7S9210 if ARCH_R7S9210
 	select CLK_R8A73A4 if ARCH_R8A73A4
 	select CLK_R8A7740 if ARCH_R8A7740
+	select CLK_R8A7742 if ARCH_R8A7742
 	select CLK_R8A7743 if ARCH_R8A7743 || ARCH_R8A7744
 	select CLK_R8A7745 if ARCH_R8A7745
 	select CLK_R8A77470 if ARCH_R8A77470
@@ -55,6 +56,10 @@ config CLK_R8A7740
 	select CLK_RENESAS_CPG_MSTP
 	select CLK_RENESAS_DIV6
 
+config CLK_R8A7742
+	bool "RZ/G1H clock support" if COMPILE_TEST
+	select CLK_RCAR_GEN2_CPG
+
 config CLK_R8A7743
 	bool "RZ/G1M clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2_CPG
@@ -90,12 +95,10 @@ config CLK_R8A7779
 config CLK_R8A7790
 	bool "R-Car H2 clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2_CPG
-	select CLK_RENESAS_DIV6
 
 config CLK_R8A7791
 	bool "R-Car M2-W/N clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2_CPG
-	select CLK_RENESAS_DIV6
 
 config CLK_R8A7792
 	bool "R-Car V2H clock support" if COMPILE_TEST
@@ -104,7 +107,6 @@ config CLK_R8A7792
 config CLK_R8A7794
 	bool "R-Car E2 clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2_CPG
-	select CLK_RENESAS_DIV6
 
 config CLK_R8A7795
 	bool "R-Car H3 clock support" if COMPILE_TEST

drivers/clk/renesas/Makefile

@@ -5,6 +5,7 @@ obj-$(CONFIG_CLK_RZA1)			+= clk-rz.o
 obj-$(CONFIG_CLK_R7S9210)		+= r7s9210-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A73A4)		+= clk-r8a73a4.o
 obj-$(CONFIG_CLK_R8A7740)		+= clk-r8a7740.o
+obj-$(CONFIG_CLK_R8A7742)		+= r8a7742-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A7743)		+= r8a7743-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A7745)		+= r8a7745-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A77470)		+= r8a77470-cpg-mssr.o

drivers/clk/renesas/r8a7742-cpg-mssr.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * r8a7742 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/soc/renesas/rcar-rst.h>
+
+#include <dt-bindings/clock/r8a7742-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen2-cpg.h"
+
+enum clk_ids {
+	/* Core Clock Outputs exported to DT */
+	LAST_DT_CORE_CLK = R8A7742_CLK_OSC,
+
+	/* External Input Clocks */
+	CLK_EXTAL,
+	CLK_USB_EXTAL,
+
+	/* Internal Core Clocks */
+	CLK_MAIN,
+	CLK_PLL0,
+	CLK_PLL1,
+	CLK_PLL3,
+	CLK_PLL1_DIV2,
+
+	/* Module Clocks */
+	MOD_CLK_BASE
+};
+
+static const struct cpg_core_clk r8a7742_core_clks[] __initconst = {
+	/* External Clock Inputs */
+	DEF_INPUT("extal",	CLK_EXTAL),
+	DEF_INPUT("usb_extal",	CLK_USB_EXTAL),
+
+	/* Internal Core Clocks */
+	DEF_BASE(".main",	CLK_MAIN, CLK_TYPE_GEN2_MAIN, CLK_EXTAL),
+	DEF_BASE(".pll0",	CLK_PLL0, CLK_TYPE_GEN2_PLL0, CLK_MAIN),
+	DEF_BASE(".pll1",	CLK_PLL1, CLK_TYPE_GEN2_PLL1, CLK_MAIN),
+	DEF_BASE(".pll3",	CLK_PLL3, CLK_TYPE_GEN2_PLL3, CLK_MAIN),
+
+	DEF_FIXED(".pll1_div2",	CLK_PLL1_DIV2, CLK_PLL1, 2, 1),
+
+	/* Core Clock Outputs */
+	DEF_BASE("z",    R8A7742_CLK_Z,    CLK_TYPE_GEN2_Z,	CLK_PLL0),
+	DEF_BASE("lb",   R8A7742_CLK_LB,   CLK_TYPE_GEN2_LB,	CLK_PLL1),
+	DEF_BASE("sdh",  R8A7742_CLK_SDH,  CLK_TYPE_GEN2_SDH,	CLK_PLL1),
+	DEF_BASE("sd0",  R8A7742_CLK_SD0,  CLK_TYPE_GEN2_SD0,	CLK_PLL1),
+	DEF_BASE("sd1",  R8A7742_CLK_SD1,  CLK_TYPE_GEN2_SD1,	CLK_PLL1),
+	DEF_BASE("qspi", R8A7742_CLK_QSPI, CLK_TYPE_GEN2_QSPI,	CLK_PLL1_DIV2),
+	DEF_BASE("rcan", R8A7742_CLK_RCAN, CLK_TYPE_GEN2_RCAN,	CLK_USB_EXTAL),
+
+	DEF_FIXED("z2",    R8A7742_CLK_Z2,	CLK_PLL1,	    2, 1),
+	DEF_FIXED("zg",    R8A7742_CLK_ZG,	CLK_PLL1,	    3, 1),
+	DEF_FIXED("zx",    R8A7742_CLK_ZX,	CLK_PLL1,	    3, 1),
+	DEF_FIXED("zs",    R8A7742_CLK_ZS,	CLK_PLL1,	    6, 1),
+	DEF_FIXED("hp",    R8A7742_CLK_HP,	CLK_PLL1,	   12, 1),
+	DEF_FIXED("b",     R8A7742_CLK_B,	CLK_PLL1,	   12, 1),
+	DEF_FIXED("p",     R8A7742_CLK_P,	CLK_PLL1,	   24, 1),
+	DEF_FIXED("cl",    R8A7742_CLK_CL,	CLK_PLL1,	   48, 1),
+	DEF_FIXED("m2",    R8A7742_CLK_M2,	CLK_PLL1,	    8, 1),
+	DEF_FIXED("zb3",   R8A7742_CLK_ZB3,	CLK_PLL3,	    4, 1),
+	DEF_FIXED("zb3d2", R8A7742_CLK_ZB3D2,	CLK_PLL3,	    8, 1),
+	DEF_FIXED("ddr",   R8A7742_CLK_DDR,	CLK_PLL3,	    8, 1),
+	DEF_FIXED("mp",    R8A7742_CLK_MP,	CLK_PLL1_DIV2,	   15, 1),
+	DEF_FIXED("cp",    R8A7742_CLK_CP,	CLK_EXTAL,	    2, 1),
+	DEF_FIXED("r",     R8A7742_CLK_R,	CLK_PLL1,	49152, 1),
+	DEF_FIXED("osc",   R8A7742_CLK_OSC,	CLK_PLL1,	12288, 1),
+
+	DEF_DIV6P1("sd2",  R8A7742_CLK_SD2,	CLK_PLL1_DIV2,	0x078),
+	DEF_DIV6P1("sd3",  R8A7742_CLK_SD3,	CLK_PLL1_DIV2,	0x26c),
+	DEF_DIV6P1("mmc0", R8A7742_CLK_MMC0,	CLK_PLL1_DIV2,	0x240),
+	DEF_DIV6P1("mmc1", R8A7742_CLK_MMC1,	CLK_PLL1_DIV2,	0x244),
+};
+
+static const struct mssr_mod_clk r8a7742_mod_clks[] __initconst = {
+	DEF_MOD("msiof0",		   0,	R8A7742_CLK_MP),
+	DEF_MOD("vcp1",			 100,	R8A7742_CLK_ZS),
+	DEF_MOD("vcp0",			 101,	R8A7742_CLK_ZS),
+	DEF_MOD("vpc1",			 102,	R8A7742_CLK_ZS),
+	DEF_MOD("vpc0",			 103,	R8A7742_CLK_ZS),
+	DEF_MOD("tmu1",			 111,	R8A7742_CLK_P),
+	DEF_MOD("3dg",			 112,	R8A7742_CLK_ZG),
+	DEF_MOD("2d-dmac",		 115,	R8A7742_CLK_ZS),
+	DEF_MOD("fdp1-2",		 117,	R8A7742_CLK_ZS),
+	DEF_MOD("fdp1-1",		 118,	R8A7742_CLK_ZS),
+	DEF_MOD("fdp1-0",		 119,	R8A7742_CLK_ZS),
+	DEF_MOD("tmu3",			 121,	R8A7742_CLK_P),
+	DEF_MOD("tmu2",			 122,	R8A7742_CLK_P),
+	DEF_MOD("cmt0",			 124,	R8A7742_CLK_R),
+	DEF_MOD("tmu0",			 125,	R8A7742_CLK_CP),
+	DEF_MOD("vsp1du1",		 127,	R8A7742_CLK_ZS),
+	DEF_MOD("vsp1du0",		 128,	R8A7742_CLK_ZS),
+	DEF_MOD("vsp1-sy",		 131,	R8A7742_CLK_ZS),
+	DEF_MOD("scifa2",		 202,	R8A7742_CLK_MP),
+	DEF_MOD("scifa1",		 203,	R8A7742_CLK_MP),
+	DEF_MOD("scifa0",		 204,	R8A7742_CLK_MP),
+	DEF_MOD("msiof2",		 205,	R8A7742_CLK_MP),
+	DEF_MOD("scifb0",		 206,	R8A7742_CLK_MP),
+	DEF_MOD("scifb1",		 207,	R8A7742_CLK_MP),
+	DEF_MOD("msiof1",		 208,	R8A7742_CLK_MP),
+	DEF_MOD("msiof3",		 215,	R8A7742_CLK_MP),
+	DEF_MOD("scifb2",		 216,	R8A7742_CLK_MP),
+	DEF_MOD("sys-dmac1",		 218,	R8A7742_CLK_ZS),
+	DEF_MOD("sys-dmac0",		 219,	R8A7742_CLK_ZS),
+	DEF_MOD("iic2",			 300,	R8A7742_CLK_HP),
+	DEF_MOD("tpu0",			 304,	R8A7742_CLK_CP),
+	DEF_MOD("mmcif1",		 305,	R8A7742_CLK_MMC1),
+	DEF_MOD("scif2",		 310,	R8A7742_CLK_P),
+	DEF_MOD("sdhi3",		 311,	R8A7742_CLK_SD3),
+	DEF_MOD("sdhi2",		 312,	R8A7742_CLK_SD2),
+	DEF_MOD("sdhi1",		 313,	R8A7742_CLK_SD1),
+	DEF_MOD("sdhi0",		 314,	R8A7742_CLK_SD0),
+	DEF_MOD("mmcif0",		 315,	R8A7742_CLK_MMC0),
+	DEF_MOD("iic0",			 318,	R8A7742_CLK_HP),
+	DEF_MOD("pciec",		 319,	R8A7742_CLK_MP),
+	DEF_MOD("iic1",			 323,	R8A7742_CLK_HP),
+	DEF_MOD("usb3.0",		 328,	R8A7742_CLK_MP),
+	DEF_MOD("cmt1",			 329,	R8A7742_CLK_R),
+	DEF_MOD("usbhs-dmac0",		 330,	R8A7742_CLK_HP),
+	DEF_MOD("usbhs-dmac1",		 331,	R8A7742_CLK_HP),
+	DEF_MOD("rwdt",			 402,	R8A7742_CLK_R),
+	DEF_MOD("irqc",			 407,	R8A7742_CLK_CP),
+	DEF_MOD("intc-sys",		 408,	R8A7742_CLK_ZS),
+	DEF_MOD("audio-dmac1",		 501,	R8A7742_CLK_HP),
+	DEF_MOD("audio-dmac0",		 502,	R8A7742_CLK_HP),
+	DEF_MOD("thermal",		 522,	CLK_EXTAL),
+	DEF_MOD("pwm",			 523,	R8A7742_CLK_P),
+	DEF_MOD("usb-ehci",		 703,	R8A7742_CLK_MP),
+	DEF_MOD("usbhs",		 704,	R8A7742_CLK_HP),
+	DEF_MOD("hscif1",		 716,	R8A7742_CLK_ZS),
+	DEF_MOD("hscif0",		 717,	R8A7742_CLK_ZS),
+	DEF_MOD("scif1",		 720,	R8A7742_CLK_P),
+	DEF_MOD("scif0",		 721,	R8A7742_CLK_P),
+	DEF_MOD("du2",			 722,	R8A7742_CLK_ZX),
+	DEF_MOD("du1",			 723,	R8A7742_CLK_ZX),
+	DEF_MOD("du0",			 724,	R8A7742_CLK_ZX),
+	DEF_MOD("lvds1",		 725,	R8A7742_CLK_ZX),
+	DEF_MOD("lvds0",		 726,	R8A7742_CLK_ZX),
+	DEF_MOD("r-gp2d",		 807,	R8A7742_CLK_ZX),
+	DEF_MOD("vin3",			 808,	R8A7742_CLK_ZG),
+	DEF_MOD("vin2",			 809,	R8A7742_CLK_ZG),
+	DEF_MOD("vin1",			 810,	R8A7742_CLK_ZG),
+	DEF_MOD("vin0",			 811,	R8A7742_CLK_ZG),
+	DEF_MOD("etheravb",		 812,	R8A7742_CLK_HP),
+	DEF_MOD("ether",		 813,	R8A7742_CLK_P),
+	DEF_MOD("sata1",		 814,	R8A7742_CLK_ZS),
+	DEF_MOD("sata0",		 815,	R8A7742_CLK_ZS),
+	DEF_MOD("imr-x2-1",		 820,	R8A7742_CLK_ZG),
+	DEF_MOD("imr-x2-0",		 821,	R8A7742_CLK_HP),
+	DEF_MOD("imr-lsx2-1",		 822,	R8A7742_CLK_P),
+	DEF_MOD("imr-lsx2-0",		 823,	R8A7742_CLK_ZS),
+	DEF_MOD("gpio5",		 907,	R8A7742_CLK_CP),
+	DEF_MOD("gpio4",		 908,	R8A7742_CLK_CP),
+	DEF_MOD("gpio3",		 909,	R8A7742_CLK_CP),
+	DEF_MOD("gpio2",		 910,	R8A7742_CLK_CP),
+	DEF_MOD("gpio1",		 911,	R8A7742_CLK_CP),
+	DEF_MOD("gpio0",		 912,	R8A7742_CLK_CP),
+	DEF_MOD("can1",			 915,	R8A7742_CLK_P),
+	DEF_MOD("can0",			 916,	R8A7742_CLK_P),
+	DEF_MOD("qspi_mod",		 917,	R8A7742_CLK_QSPI),
+	DEF_MOD("iicdvfs",		 926,	R8A7742_CLK_CP),
+	DEF_MOD("i2c3",			 928,	R8A7742_CLK_HP),
+	DEF_MOD("i2c2",			 929,	R8A7742_CLK_HP),
+	DEF_MOD("i2c1",			 930,	R8A7742_CLK_HP),
+	DEF_MOD("i2c0",			 931,	R8A7742_CLK_HP),
+	DEF_MOD("ssi-all",		1005,	R8A7742_CLK_P),
+	DEF_MOD("ssi9",			1006,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi8",			1007,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi7",			1008,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi6",			1009,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi5",			1010,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi4",			1011,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi3",			1012,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi2",			1013,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi1",			1014,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi0",			1015,	MOD_CLK_ID(1005)),
+	DEF_MOD("scu-all",		1017,	R8A7742_CLK_P),
+	DEF_MOD("scu-dvc1",		1018,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-dvc0",		1019,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-ctu1-mix1",	1020,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-ctu0-mix0",	1021,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src9",		1022,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src8",		1023,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src7",		1024,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src6",		1025,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src5",		1026,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src4",		1027,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src3",		1028,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src2",		1029,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src1",		1030,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src0",		1031,	MOD_CLK_ID(1017)),
+};
+
+static const unsigned int r8a7742_crit_mod_clks[] __initconst = {
+	MOD_CLK_ID(402),	/* RWDT */
+	MOD_CLK_ID(408),	/* INTC-SYS (GIC) */
+};
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ *    MD	EXTAL		PLL0	PLL1	PLL3
+ * 14 13 19	(MHz)		*1	*1
+ *---------------------------------------------------
+ * 0  0  0	15		x172/2	x208/2	x106
+ * 0  0  1	15		x172/2	x208/2	x88
+ * 0  1  0	20		x130/2	x156/2	x80
+ * 0  1  1	20		x130/2	x156/2	x66
+ * 1  0  0	26 / 2		x200/2	x240/2	x122
+ * 1  0  1	26 / 2		x200/2	x240/2	x102
+ * 1  1  0	30 / 2		x172/2	x208/2	x106
+ * 1  1  1	30 / 2		x172/2	x208/2	x88
+ *
+ * *1 :	Table 7.5a indicates VCO output (PLLx = VCO/2)
+ */
+#define CPG_PLL_CONFIG_INDEX(md)	((((md) & BIT(14)) >> 12) | \
+					 (((md) & BIT(13)) >> 12) | \
+					 (((md) & BIT(19)) >> 19))
+
+static const struct rcar_gen2_cpg_pll_config cpg_pll_configs[8] __initconst = {
+	/* EXTAL div	PLL1 mult	PLL3 mult */
+	{ 1,		208,		106,	},
+	{ 1,		208,		88,	},
+	{ 1,		156,		80,	},
+	{ 1,		156,		66,	},
+	{ 2,		240,		122,	},
+	{ 2,		240,		102,	},
+	{ 2,		208,		106,	},
+	{ 2,		208,		88,	},
+};
+
+static int __init r8a7742_cpg_mssr_init(struct device *dev)
+{
+	const struct rcar_gen2_cpg_pll_config *cpg_pll_config;
+	u32 cpg_mode;
+	int error;
+
+	error = rcar_rst_read_mode_pins(&cpg_mode);
+	if (error)
+		return error;
+
+	cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+
+	return rcar_gen2_cpg_init(cpg_pll_config, 2, cpg_mode);
+}
+
+const struct cpg_mssr_info r8a7742_cpg_mssr_info __initconst = {
+	/* Core Clocks */
+	.core_clks = r8a7742_core_clks,
+	.num_core_clks = ARRAY_SIZE(r8a7742_core_clks),
+	.last_dt_core_clk = LAST_DT_CORE_CLK,
+	.num_total_core_clks = MOD_CLK_BASE,
+
+	/* Module Clocks */
+	.mod_clks = r8a7742_mod_clks,
+	.num_mod_clks = ARRAY_SIZE(r8a7742_mod_clks),
+	.num_hw_mod_clks = 12 * 32,
+
+	/* Critical Module Clocks */
+	.crit_mod_clks = r8a7742_crit_mod_clks,
+	.num_crit_mod_clks = ARRAY_SIZE(r8a7742_crit_mod_clks),
+
+	/* Callbacks */
+	.init = r8a7742_cpg_mssr_init,
+	.cpg_clk_register = rcar_gen2_cpg_clk_register,
+};

drivers/clk/renesas/r9a06g032-clocks.c

 // SPDX-License-Identifier: GPL-2.0
 /*
- * R9A09G032 clock driver
+ * R9A06G032 clock driver
  *
  * Copyright (C) 2018 Renesas Electronics Europe Limited
  *
@@ -338,8 +338,8 @@ clk_rdesc_get(struct r9a06g032_priv *clocks,
 }
 
 /*
- * This implements the R9A09G032 clock gate 'driver'. We cannot use the system's
- * clock gate framework as the gates on the R9A09G032 have a special enabling
+ * This implements the R9A06G032 clock gate 'driver'. We cannot use the system's
+ * clock gate framework as the gates on the R9A06G032 have a special enabling
  * sequence, therefore we use this little proxy.
  */
 struct r9a06g032_clk_gate {

drivers/clk/renesas/renesas-cpg-mssr.c

@@ -673,6 +673,12 @@ static const struct of_device_id cpg_mssr_match[] = {
 		.data = &r7s9210_cpg_mssr_info,
 	},
 #endif
+#ifdef CONFIG_CLK_R8A7742
+	{
+		.compatible = "renesas,r8a7742-cpg-mssr",
+		.data = &r8a7742_cpg_mssr_info,
+	},
+#endif
 #ifdef CONFIG_CLK_R8A7743
 	{
 		.compatible = "renesas,r8a7743-cpg-mssr",
@@ -812,7 +818,8 @@ static int cpg_mssr_suspend_noirq(struct device *dev)
 	/* Save module registers with bits under our control */
 	for (reg = 0; reg < ARRAY_SIZE(priv->smstpcr_saved); reg++) {
 		if (priv->smstpcr_saved[reg].mask)
-			priv->smstpcr_saved[reg].val =
+			priv->smstpcr_saved[reg].val = priv->stbyctrl ?
+				readb(priv->base + STBCR(reg)) :
 				readl(priv->base + SMSTPCR(reg));
 	}
 
@@ -872,8 +879,9 @@ static int cpg_mssr_resume_noirq(struct device *dev)
 		}
 
 		if (!i)
-			dev_warn(dev, "Failed to enable SMSTP %p[0x%x]\n",
-				 priv->base + SMSTPCR(reg), oldval & mask);
+			dev_warn(dev, "Failed to enable %s%u[0x%x]\n",
+				 priv->stbyctrl ? "STB" : "SMSTP", reg,
+				 oldval & mask);
 	}
 
 	return 0;

drivers/clk/renesas/renesas-cpg-mssr.h

@@ -155,6 +155,7 @@ struct cpg_mssr_info {
 };
 
 extern const struct cpg_mssr_info r7s9210_cpg_mssr_info;
+extern const struct cpg_mssr_info r8a7742_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a7743_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a7745_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a77470_cpg_mssr_info;

drivers/clk/samsung/clk-exynos5420.c

@@ -540,7 +540,7 @@ static const struct samsung_div_clock exynos5800_div_clks[] __initconst = {
 
 static const struct samsung_gate_clock exynos5800_gate_clks[] __initconst = {
 	GATE(CLK_ACLK550_CAM, "aclk550_cam", "mout_user_aclk550_cam",
-				GATE_BUS_TOP, 24, 0, 0),
+				GATE_BUS_TOP, 24, CLK_IS_CRITICAL, 0),
 	GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler",
 				GATE_BUS_TOP, 27, CLK_IS_CRITICAL, 0),
 };
@@ -943,25 +943,25 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
 	GATE(0, "aclk300_jpeg", "mout_user_aclk300_jpeg",
 			GATE_BUS_TOP, 4, CLK_IGNORE_UNUSED, 0),
 	GATE(0, "aclk333_432_isp0", "mout_user_aclk333_432_isp0",
-			GATE_BUS_TOP, 5, 0, 0),
+			GATE_BUS_TOP, 5, CLK_IS_CRITICAL, 0),
 	GATE(0, "aclk300_gscl", "mout_user_aclk300_gscl",
 			GATE_BUS_TOP, 6, CLK_IS_CRITICAL, 0),
 	GATE(0, "aclk333_432_gscl", "mout_user_aclk333_432_gscl",
 			GATE_BUS_TOP, 7, CLK_IGNORE_UNUSED, 0),
 	GATE(0, "aclk333_432_isp", "mout_user_aclk333_432_isp",
-			GATE_BUS_TOP, 8, 0, 0),
+			GATE_BUS_TOP, 8, CLK_IS_CRITICAL, 0),
 	GATE(CLK_PCLK66_GPIO, "pclk66_gpio", "mout_user_pclk66_gpio",
 			GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0),
 	GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen",
 			GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0),
 	GATE(0, "aclk266_isp", "mout_user_aclk266_isp",
-			GATE_BUS_TOP, 13, 0, 0),
+			GATE_BUS_TOP, 13, CLK_IS_CRITICAL, 0),
 	GATE(0, "aclk166", "mout_user_aclk166",
 			GATE_BUS_TOP, 14, CLK_IGNORE_UNUSED, 0),
 	GATE(CLK_ACLK333, "aclk333", "mout_user_aclk333",
 			GATE_BUS_TOP, 15, CLK_IS_CRITICAL, 0),
 	GATE(0, "aclk400_isp", "mout_user_aclk400_isp",
-			GATE_BUS_TOP, 16, 0, 0),
+			GATE_BUS_TOP, 16, CLK_IS_CRITICAL, 0),
 	GATE(0, "aclk400_mscl", "mout_user_aclk400_mscl",
 			GATE_BUS_TOP, 17, CLK_IS_CRITICAL, 0),
 	GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1",
@@ -1161,9 +1161,11 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
 			GATE_IP_GSCL1, 3, 0, 0),
 	GATE(CLK_SMMU_FIMCL1, "smmu_fimcl1", "dout_gscl_blk_333",
 			GATE_IP_GSCL1, 4, 0, 0),
-	GATE(CLK_GSCL_WA, "gscl_wa", "sclk_gscl_wa", GATE_IP_GSCL1, 12, 0, 0),
-	GATE(CLK_GSCL_WB, "gscl_wb", "sclk_gscl_wb", GATE_IP_GSCL1, 13, 0, 0),
-	GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3,", "dout_gscl_blk_333",
+	GATE(CLK_GSCL_WA, "gscl_wa", "sclk_gscl_wa", GATE_IP_GSCL1, 12,
+			CLK_IS_CRITICAL, 0),
+	GATE(CLK_GSCL_WB, "gscl_wb", "sclk_gscl_wb", GATE_IP_GSCL1, 13,
+			CLK_IS_CRITICAL, 0),
+	GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3", "dout_gscl_blk_333",
 			GATE_IP_GSCL1, 16, 0, 0),
 	GATE(CLK_FIMC_LITE3, "fimc_lite3", "aclk333_432_gscl",
 			GATE_IP_GSCL1, 17, 0, 0),

drivers/clk/samsung/clk-exynos5433.c

@@ -1706,7 +1706,8 @@ static const struct samsung_gate_clock peric_gate_clks[] __initconst = {
 	GATE(CLK_SCLK_PCM1, "sclk_pcm1", "sclk_pcm1_peric",
 			ENABLE_SCLK_PERIC, 7, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_I2S1, "sclk_i2s1", "sclk_i2s1_peric",
-			ENABLE_SCLK_PERIC, 6, CLK_SET_RATE_PARENT, 0),
+			ENABLE_SCLK_PERIC, 6,
+			CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
 	GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC,
 			5, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC,

drivers/clk/samsung/clk-s3c2443.c

@@ -387,7 +387,7 @@ void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
 				ARRAY_SIZE(s3c2450_gates));
 		samsung_clk_register_alias(ctx, s3c2450_aliases,
 				ARRAY_SIZE(s3c2450_aliases));
-		/* fall through - as s3c2450 extends the s3c2416 clocks */
+		fallthrough;	/* as s3c2450 extends the s3c2416 clocks */
 	case S3C2416:
 		samsung_clk_register_div(ctx, s3c2416_dividers,
 				ARRAY_SIZE(s3c2416_dividers));

drivers/clk/sunxi/clk-sunxi.c

@@ -90,7 +90,7 @@ static void sun6i_a31_get_pll1_factors(struct factors_request *req)
 	 * Round down the frequency to the closest multiple of either
 	 * 6 or 16
 	 */
-	u32 round_freq_6 = round_down(freq_mhz, 6);
+	u32 round_freq_6 = rounddown(freq_mhz, 6);
 	u32 round_freq_16 = round_down(freq_mhz, 16);
 
 	if (round_freq_6 > round_freq_16)

drivers/i2c/busses/i2c-s3c2410.c

@@ -435,8 +435,7 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 		 * fall through to the write state, as we will need to
 		 * send a byte as well
 		 */
-		/* Fall through */
-
+		fallthrough;
 	case STATE_WRITE:
 		/*
 		 * we are writing data to the device... check for the

include/dt-bindings/clock/meson8b-clkc.h

@@ -107,6 +107,7 @@
 #define CLKID_PERIPH		126
 #define CLKID_AXI		128
 #define CLKID_L2_DRAM		130
+#define CLKID_HDMI_SYS		174
 #define CLKID_VPU		190
 #define CLKID_VDEC_1		196
 #define CLKID_VDEC_HCODEC	199

include/dt-bindings/clock/r8a7742-cpg-mssr.h

+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R8A7742_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_R8A7742_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* r8a7742 CPG Core Clocks */
+#define R8A7742_CLK_Z		0
+#define R8A7742_CLK_Z2		1
+#define R8A7742_CLK_ZG		2
+#define R8A7742_CLK_ZTR		3
+#define R8A7742_CLK_ZTRD2	4
+#define R8A7742_CLK_ZT		5
+#define R8A7742_CLK_ZX		6
+#define R8A7742_CLK_ZS		7
+#define R8A7742_CLK_HP		8
+#define R8A7742_CLK_B		9
+#define R8A7742_CLK_LB		10
+#define R8A7742_CLK_P		11
+#define R8A7742_CLK_CL		12
+#define R8A7742_CLK_M2		13
+#define R8A7742_CLK_ZB3		14
+#define R8A7742_CLK_ZB3D2	15
+#define R8A7742_CLK_DDR		16
+#define R8A7742_CLK_SDH		17
+#define R8A7742_CLK_SD0		18
+#define R8A7742_CLK_SD1		19
+#define R8A7742_CLK_SD2		20
+#define R8A7742_CLK_SD3		21
+#define R8A7742_CLK_MMC0	22
+#define R8A7742_CLK_MMC1	23
+#define R8A7742_CLK_MP		24
+#define R8A7742_CLK_QSPI	25
+#define R8A7742_CLK_CP		26
+#define R8A7742_CLK_RCAN	27
+#define R8A7742_CLK_R		28
+#define R8A7742_CLK_OSC		29
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7742_CPG_MSSR_H__ */

include/dt-bindings/power/r8a7742-sysc.h

+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A7742_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A7742_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A7742_PD_CA15_CPU0		 0
+#define R8A7742_PD_CA15_CPU1		 1
+#define R8A7742_PD_CA15_CPU2		 2
+#define R8A7742_PD_CA15_CPU3		 3
+#define R8A7742_PD_CA7_CPU0		 5
+#define R8A7742_PD_CA7_CPU1		 6
+#define R8A7742_PD_CA7_CPU2		 7
+#define R8A7742_PD_CA7_CPU3		 8
+#define R8A7742_PD_CA15_SCU		12
+#define R8A7742_PD_RGX			20
+#define R8A7742_PD_CA7_SCU		21
+
+/* Always-on power area */
+#define R8A7742_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A7742_SYSC_H__ */