Commit 3a84f846 authored by Stephane Viau's avatar Stephane Viau Committed by Rob Clark

drm/msm: Add support for msm8x94

This change adds the MDP and HDMI support for msm8x94.
Note that HDMI PHY registers are not being accessed anymore from
the driver.
Signed-off-by: default avatarStephane Viau <sviau@codeaurora.org>
[rename compatible s/8x94/8994/ since preference is to not trust the
marketing folks who invent chip #'s but instead name things after the
lead chip.. we should rename some 80XY to 89XY to standardize on the
lead chip but leave that for another patch.  Also, update dt bindings
doc]
Signed-off-by: default avatarRob Clark <robdclark@gmail.com>
parent da328552
......@@ -2,6 +2,7 @@ Qualcomm adreno/snapdragon hdmi output
Required properties:
- compatible: one of the following
* "qcom,hdmi-tx-8994"
* "qcom,hdmi-tx-8084"
* "qcom,hdmi-tx-8074"
* "qcom,hdmi-tx-8660"
......
......@@ -107,16 +107,15 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
spin_lock_init(&hdmi->reg_lock);
/* not sure about which phy maps to which msm.. probably I miss some */
if (config->phy_init)
if (config->phy_init) {
hdmi->phy = config->phy_init(hdmi);
else
hdmi->phy = ERR_PTR(-ENXIO);
if (IS_ERR(hdmi->phy)) {
ret = PTR_ERR(hdmi->phy);
dev_err(&pdev->dev, "failed to load phy: %d\n", ret);
hdmi->phy = NULL;
goto fail;
if (IS_ERR(hdmi->phy)) {
ret = PTR_ERR(hdmi->phy);
dev_err(&pdev->dev, "failed to load phy: %d\n", ret);
hdmi->phy = NULL;
goto fail;
}
}
hdmi->mmio = msm_ioremap(pdev, config->mmio_name, "HDMI");
......@@ -368,7 +367,19 @@ static struct hdmi_platform_config hdmi_tx_8084_config = {
.hpd_freq = hpd_clk_freq_8x74,
};
static const char *hpd_reg_names_8x94[] = {};
static struct hdmi_platform_config hdmi_tx_8x94_config = {
.phy_init = NULL, /* nothing to do for this HDMI PHY 20nm */
HDMI_CFG(pwr_reg, 8x74),
HDMI_CFG(hpd_reg, 8x94),
HDMI_CFG(pwr_clk, 8x74),
HDMI_CFG(hpd_clk, 8x74),
.hpd_freq = hpd_clk_freq_8x74,
};
static const struct of_device_id dt_match[] = {
{ .compatible = "qcom,hdmi-tx-8994", .data = &hdmi_tx_8x94_config },
{ .compatible = "qcom,hdmi-tx-8084", .data = &hdmi_tx_8084_config },
{ .compatible = "qcom,hdmi-tx-8074", .data = &hdmi_tx_8074_config },
{ .compatible = "qcom,hdmi-tx-8960", .data = &hdmi_tx_8960_config },
......@@ -385,8 +396,7 @@ static int get_gpio(struct device *dev, struct device_node *of_node, const char
snprintf(name2, sizeof(name2), "%s-gpio", name);
gpio = of_get_named_gpio(of_node, name2, 0);
if (gpio < 0) {
dev_err(dev, "failed to get gpio: %s (%d)\n",
name, gpio);
DBG("failed to get gpio: %s (%d)", name, gpio);
gpio = -1;
}
}
......
......@@ -100,7 +100,9 @@ static void hdmi_bridge_pre_enable(struct drm_bridge *bridge)
hdmi_audio_update(hdmi);
}
phy->funcs->powerup(phy, hdmi->pixclock);
if (phy)
phy->funcs->powerup(phy, hdmi->pixclock);
hdmi_set_mode(hdmi, true);
if (hdmi->hdcp_ctrl)
......@@ -126,7 +128,9 @@ static void hdmi_bridge_post_disable(struct drm_bridge *bridge)
DBG("power down");
hdmi_set_mode(hdmi, false);
phy->funcs->powerdown(phy);
if (phy)
phy->funcs->powerdown(phy);
if (hdmi->power_on) {
power_off(bridge);
......
......@@ -84,21 +84,25 @@ static int gpio_config(struct hdmi *hdmi, bool on)
int ret;
if (on) {
ret = gpio_request(config->ddc_clk_gpio, "HDMI_DDC_CLK");
if (ret) {
dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
"HDMI_DDC_CLK", config->ddc_clk_gpio, ret);
goto error1;
if (config->ddc_clk_gpio != -1) {
ret = gpio_request(config->ddc_clk_gpio, "HDMI_DDC_CLK");
if (ret) {
dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
"HDMI_DDC_CLK", config->ddc_clk_gpio, ret);
goto error1;
}
gpio_set_value_cansleep(config->ddc_clk_gpio, 1);
}
gpio_set_value_cansleep(config->ddc_clk_gpio, 1);
ret = gpio_request(config->ddc_data_gpio, "HDMI_DDC_DATA");
if (ret) {
dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
"HDMI_DDC_DATA", config->ddc_data_gpio, ret);
goto error2;
if (config->ddc_data_gpio != -1) {
ret = gpio_request(config->ddc_data_gpio, "HDMI_DDC_DATA");
if (ret) {
dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
"HDMI_DDC_DATA", config->ddc_data_gpio, ret);
goto error2;
}
gpio_set_value_cansleep(config->ddc_data_gpio, 1);
}
gpio_set_value_cansleep(config->ddc_data_gpio, 1);
ret = gpio_request(config->hpd_gpio, "HDMI_HPD");
if (ret) {
......@@ -143,8 +147,12 @@ static int gpio_config(struct hdmi *hdmi, bool on)
}
DBG("gpio on");
} else {
gpio_free(config->ddc_clk_gpio);
gpio_free(config->ddc_data_gpio);
if (config->ddc_clk_gpio != -1)
gpio_free(config->ddc_clk_gpio);
if (config->ddc_data_gpio != -1)
gpio_free(config->ddc_data_gpio);
gpio_free(config->hpd_gpio);
if (config->mux_en_gpio != -1) {
......@@ -175,9 +183,11 @@ static int gpio_config(struct hdmi *hdmi, bool on)
error4:
gpio_free(config->hpd_gpio);
error3:
gpio_free(config->ddc_data_gpio);
if (config->ddc_data_gpio != -1)
gpio_free(config->ddc_data_gpio);
error2:
gpio_free(config->ddc_clk_gpio);
if (config->ddc_clk_gpio != -1)
gpio_free(config->ddc_clk_gpio);
error1:
return ret;
}
......
......@@ -203,14 +203,85 @@ const struct mdp5_cfg_hw msm8x16_config = {
.max_clk = 320000000,
};
const struct mdp5_cfg_hw msm8x94_config = {
.name = "msm8x94",
.mdp = {
.count = 1,
.base = { 0x01000 },
},
.smp = {
.mmb_count = 44,
.mmb_size = 8192,
.clients = {
[SSPP_VIG0] = 1, [SSPP_VIG1] = 4,
[SSPP_VIG2] = 7, [SSPP_VIG3] = 19,
[SSPP_DMA0] = 10, [SSPP_DMA1] = 13,
[SSPP_RGB0] = 16, [SSPP_RGB1] = 17,
[SSPP_RGB2] = 18, [SSPP_RGB3] = 22,
},
.reserved_state[0] = GENMASK(23, 0), /* first 24 MMBs */
.reserved = {
[1] = 1, [4] = 1, [7] = 1, [19] = 1,
[16] = 5, [17] = 5, [18] = 5, [22] = 5,
},
},
.ctl = {
.count = 5,
.base = { 0x02000, 0x02200, 0x02400, 0x02600, 0x02800 },
.flush_hw_mask = 0xf0ffffff,
},
.pipe_vig = {
.count = 4,
.base = { 0x05000, 0x07000, 0x09000, 0x0b000 },
/* TODO: add decimation bit */
},
.pipe_rgb = {
.count = 4,
.base = { 0x15000, 0x17000, 0x19000, 0x1b000 },
/* TODO: add decimation bit */
},
.pipe_dma = {
.count = 2,
.base = { 0x25000, 0x27000 },
},
.lm = {
.count = 6,
.base = { 0x45000, 0x46000, 0x47000, 0x48000, 0x49000, 0x4a000 },
.nb_stages = 8,
},
.dspp = {
.count = 4,
.base = { 0x55000, 0x57000, 0x59000, 0x5b000 },
},
.ad = {
.count = 3,
.base = { 0x79000, 0x79800, 0x7a000 },
},
.pp = {
.count = 4,
.base = { 0x71000, 0x71800, 0x72000, 0x72800 },
},
.intf = {
.base = { 0x6b000, 0x6b800, 0x6c000, 0x6c800, 0x6d000 },
.connect = {
[0] = INTF_DISABLED,
[1] = INTF_DSI,
[2] = INTF_DSI,
[3] = INTF_HDMI,
},
},
.max_clk = 320000000,
};
static const struct mdp5_cfg_handler cfg_handlers[] = {
{ .revision = 0, .config = { .hw = &msm8x74_config } },
{ .revision = 2, .config = { .hw = &msm8x74_config } },
{ .revision = 3, .config = { .hw = &apq8084_config } },
{ .revision = 6, .config = { .hw = &msm8x16_config } },
{ .revision = 9, .config = { .hw = &msm8x94_config } },
};
static struct mdp5_cfg_platform *mdp5_get_config(struct platform_device *dev);
const struct mdp5_cfg_hw *mdp5_cfg_get_hw_config(struct mdp5_cfg_handler *cfg_handler)
......
......@@ -177,7 +177,8 @@ int mdp5_disable(struct mdp5_kms *mdp5_kms)
clk_disable_unprepare(mdp5_kms->ahb_clk);
clk_disable_unprepare(mdp5_kms->axi_clk);
clk_disable_unprepare(mdp5_kms->core_clk);
clk_disable_unprepare(mdp5_kms->lut_clk);
if (mdp5_kms->lut_clk)
clk_disable_unprepare(mdp5_kms->lut_clk);
return 0;
}
......@@ -189,7 +190,8 @@ int mdp5_enable(struct mdp5_kms *mdp5_kms)
clk_prepare_enable(mdp5_kms->ahb_clk);
clk_prepare_enable(mdp5_kms->axi_clk);
clk_prepare_enable(mdp5_kms->core_clk);
clk_prepare_enable(mdp5_kms->lut_clk);
if (mdp5_kms->lut_clk)
clk_prepare_enable(mdp5_kms->lut_clk);
return 0;
}
......@@ -489,7 +491,7 @@ struct msm_kms *mdp5_kms_init(struct drm_device *dev)
goto fail;
ret = get_clk(pdev, &mdp5_kms->lut_clk, "lut_clk");
if (ret)
goto fail;
DBG("failed to get (optional) lut_clk clock");
ret = get_clk(pdev, &mdp5_kms->vsync_clk, "vsync_clk");
if (ret)
goto fail;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment