Merge branch 'devel-stable' into for-next

Conflicts:
	arch/arm/kernel/entry-armv.S

Documentation/arm/kernel_user_helpers.txt

+Kernel-provided User Helpers
+============================
+
+These are segment of kernel provided user code reachable from user space
+at a fixed address in kernel memory.  This is used to provide user space
+with some operations which require kernel help because of unimplemented
+native feature and/or instructions in many ARM CPUs. The idea is for this
+code to be executed directly in user mode for best efficiency but which is
+too intimate with the kernel counter part to be left to user libraries.
+In fact this code might even differ from one CPU to another depending on
+the available instruction set, or whether it is a SMP systems. In other
+words, the kernel reserves the right to change this code as needed without
+warning. Only the entry points and their results as documented here are
+guaranteed to be stable.
+
+This is different from (but doesn't preclude) a full blown VDSO
+implementation, however a VDSO would prevent some assembly tricks with
+constants that allows for efficient branching to those code segments. And
+since those code segments only use a few cycles before returning to user
+code, the overhead of a VDSO indirect far call would add a measurable
+overhead to such minimalistic operations.
+
+User space is expected to bypass those helpers and implement those things
+inline (either in the code emitted directly by the compiler, or part of
+the implementation of a library call) when optimizing for a recent enough
+processor that has the necessary native support, but only if resulting
+binaries are already to be incompatible with earlier ARM processors due to
+useage of similar native instructions for other things.  In other words
+don't make binaries unable to run on earlier processors just for the sake
+of not using these kernel helpers if your compiled code is not going to
+use new instructions for other purpose.
+
+New helpers may be added over time, so an older kernel may be missing some
+helpers present in a newer kernel.  For this reason, programs must check
+the value of __kuser_helper_version (see below) before assuming that it is
+safe to call any particular helper.  This check should ideally be
+performed only once at process startup time, and execution aborted early
+if the required helpers are not provided by the kernel version that
+process is running on.
+
+kuser_helper_version
+--------------------
+
+Location:	0xffff0ffc
+
+Reference declaration:
+
+  extern int32_t __kuser_helper_version;
+
+Definition:
+
+  This field contains the number of helpers being implemented by the
+  running kernel.  User space may read this to determine the availability
+  of a particular helper.
+
+Usage example:
+
+#define __kuser_helper_version (*(int32_t *)0xffff0ffc)
+
+void check_kuser_version(void)
+{
+	if (__kuser_helper_version < 2) {
+		fprintf(stderr, "can't do atomic operations, kernel too old\n");
+		abort();
+	}
+}
+
+Notes:
+
+  User space may assume that the value of this field never changes
+  during the lifetime of any single process.  This means that this
+  field can be read once during the initialisation of a library or
+  startup phase of a program.
+
+kuser_get_tls
+-------------
+
+Location:	0xffff0fe0
+
+Reference prototype:
+
+  void * __kuser_get_tls(void);
+
+Input:
+
+  lr = return address
+
+Output:
+
+  r0 = TLS value
+
+Clobbered registers:
+
+  none
+
+Definition:
+
+  Get the TLS value as previously set via the __ARM_NR_set_tls syscall.
+
+Usage example:
+
+typedef void * (__kuser_get_tls_t)(void);
+#define __kuser_get_tls (*(__kuser_get_tls_t *)0xffff0fe0)
+
+void foo()
+{
+	void *tls = __kuser_get_tls();
+	printf("TLS = %p\n", tls);
+}
+
+Notes:
+
+  - Valid only if __kuser_helper_version >= 1 (from kernel version 2.6.12).
+
+kuser_cmpxchg
+-------------
+
+Location:	0xffff0fc0
+
+Reference prototype:
+
+  int __kuser_cmpxchg(int32_t oldval, int32_t newval, volatile int32_t *ptr);
+
+Input:
+
+  r0 = oldval
+  r1 = newval
+  r2 = ptr
+  lr = return address
+
+Output:
+
+  r0 = success code (zero or non-zero)
+  C flag = set if r0 == 0, clear if r0 != 0
+
+Clobbered registers:
+
+  r3, ip, flags
+
+Definition:
+
+  Atomically store newval in *ptr only if *ptr is equal to oldval.
+  Return zero if *ptr was changed or non-zero if no exchange happened.
+  The C flag is also set if *ptr was changed to allow for assembly
+  optimization in the calling code.
+
+Usage example:
+
+typedef int (__kuser_cmpxchg_t)(int oldval, int newval, volatile int *ptr);
+#define __kuser_cmpxchg (*(__kuser_cmpxchg_t *)0xffff0fc0)
+
+int atomic_add(volatile int *ptr, int val)
+{
+	int old, new;
+
+	do {
+		old = *ptr;
+		new = old + val;
+	} while(__kuser_cmpxchg(old, new, ptr));
+
+	return new;
+}
+
+Notes:
+
+  - This routine already includes memory barriers as needed.
+
+  - Valid only if __kuser_helper_version >= 2 (from kernel version 2.6.12).
+
+kuser_memory_barrier
+--------------------
+
+Location:	0xffff0fa0
+
+Reference prototype:
+
+  void __kuser_memory_barrier(void);
+
+Input:
+
+  lr = return address
+
+Output:
+
+  none
+
+Clobbered registers:
+
+  none
+
+Definition:
+
+  Apply any needed memory barrier to preserve consistency with data modified
+  manually and __kuser_cmpxchg usage.
+
+Usage example:
+
+typedef void (__kuser_dmb_t)(void);
+#define __kuser_dmb (*(__kuser_dmb_t *)0xffff0fa0)
+
+Notes:
+
+  - Valid only if __kuser_helper_version >= 3 (from kernel version 2.6.15).
+
+kuser_cmpxchg64
+---------------
+
+Location:	0xffff0f60
+
+Reference prototype:
+
+  int __kuser_cmpxchg64(const int64_t *oldval,
+                        const int64_t *newval,
+                        volatile int64_t *ptr);
+
+Input:
+
+  r0 = pointer to oldval
+  r1 = pointer to newval
+  r2 = pointer to target value
+  lr = return address
+
+Output:
+
+  r0 = success code (zero or non-zero)
+  C flag = set if r0 == 0, clear if r0 != 0
+
+Clobbered registers:
+
+  r3, lr, flags
+
+Definition:
+
+  Atomically store the 64-bit value pointed by *newval in *ptr only if *ptr
+  is equal to the 64-bit value pointed by *oldval.  Return zero if *ptr was
+  changed or non-zero if no exchange happened.
+
+  The C flag is also set if *ptr was changed to allow for assembly
+  optimization in the calling code.
+
+Usage example:
+
+typedef int (__kuser_cmpxchg64_t)(const int64_t *oldval,
+                                  const int64_t *newval,
+                                  volatile int64_t *ptr);
+#define __kuser_cmpxchg64 (*(__kuser_cmpxchg64_t *)0xffff0f60)
+
+int64_t atomic_add64(volatile int64_t *ptr, int64_t val)
+{
+	int64_t old, new;
+
+	do {
+		old = *ptr;
+		new = old + val;
+	} while(__kuser_cmpxchg64(&old, &new, ptr));
+
+	return new;
+}
+
+Notes:
+
+  - This routine already includes memory barriers as needed.
+
+  - Due to the length of this sequence, this spans 2 conventional kuser
+    "slots", therefore 0xffff0f80 is not used as a valid entry point.
+
+  - Valid only if __kuser_helper_version >= 5 (from kernel version 3.1).

arch/arm/Kconfig

@@ -10,7 +10,7 @@ config ARM
 	select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_ARCH_KGDB
-	select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
+	select HAVE_KPROBES if !XIP_KERNEL
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)

arch/arm/include/asm/assembler.h

@@ -293,4 +293,13 @@
 	.macro	ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
 	usracc	ldr, \reg, \ptr, \inc, \cond, \rept, \abort
 	.endm
+
+/* Utility macro for declaring string literals */
+	.macro	string name:req, string
+	.type \name , #object
+\name:
+	.asciz "\string"
+	.size \name , . - \name
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */

arch/arm/include/asm/dma.h

 #ifndef __ASM_ARM_DMA_H
 #define __ASM_ARM_DMA_H
 
-#include <asm/memory.h>
-
 /*
  * This is the maximum virtual address which can be DMA'd from.
  */
-#ifndef ARM_DMA_ZONE_SIZE
-#define MAX_DMA_ADDRESS	0xffffffff
+#ifndef CONFIG_ZONE_DMA
+#define MAX_DMA_ADDRESS	0xffffffffUL
 #else
-#define MAX_DMA_ADDRESS	(PAGE_OFFSET + ARM_DMA_ZONE_SIZE)
+#define MAX_DMA_ADDRESS	({ \
+	extern unsigned long arm_dma_zone_size; \
+	arm_dma_zone_size ? \
+		(PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; })
 #endif
 
 #ifdef CONFIG_ISA_DMA_API

arch/arm/include/asm/hwcap.h

@@ -4,22 +4,26 @@
 /*
  * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
  */
-#define HWCAP_SWP	1
-#define HWCAP_HALF	2
-#define HWCAP_THUMB	4
-#define HWCAP_26BIT	8	/* Play it safe */
-#define HWCAP_FAST_MULT	16
-#define HWCAP_FPA	32
-#define HWCAP_VFP	64
-#define HWCAP_EDSP	128
-#define HWCAP_JAVA	256
-#define HWCAP_IWMMXT	512
-#define HWCAP_CRUNCH	1024
-#define HWCAP_THUMBEE	2048
-#define HWCAP_NEON	4096
-#define HWCAP_VFPv3	8192
-#define HWCAP_VFPv3D16	16384
-#define HWCAP_TLS	32768
+#define HWCAP_SWP	(1 << 0)
+#define HWCAP_HALF	(1 << 1)
+#define HWCAP_THUMB	(1 << 2)
+#define HWCAP_26BIT	(1 << 3)	/* Play it safe */
+#define HWCAP_FAST_MULT	(1 << 4)
+#define HWCAP_FPA	(1 << 5)
+#define HWCAP_VFP	(1 << 6)
+#define HWCAP_EDSP	(1 << 7)
+#define HWCAP_JAVA	(1 << 8)
+#define HWCAP_IWMMXT	(1 << 9)
+#define HWCAP_CRUNCH	(1 << 10)
+#define HWCAP_THUMBEE	(1 << 11)
+#define HWCAP_NEON	(1 << 12)
+#define HWCAP_VFPv3	(1 << 13)
+#define HWCAP_VFPv3D16	(1 << 14)
+#define HWCAP_TLS	(1 << 15)
+#define HWCAP_VFPv4	(1 << 16)
+#define HWCAP_IDIVA	(1 << 17)
+#define HWCAP_IDIVT	(1 << 18)
+#define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 /*

arch/arm/include/asm/kprobes.h

@@ -24,12 +24,6 @@
 #define MAX_INSN_SIZE			2
 #define MAX_STACK_SIZE			64	/* 32 would probably be OK */
 
-/*
- * This undefined instruction must be unique and
- * reserved solely for kprobes' use.
- */
-#define KPROBE_BREAKPOINT_INSTRUCTION	0xe7f001f8
-
 #define regs_return_value(regs)		((regs)->ARM_r0)
 #define flush_insn_slot(p)		do { } while (0)
 #define kretprobe_blacklist_size	0
@@ -38,14 +32,17 @@ typedef u32 kprobe_opcode_t;
 
 struct kprobe;
 typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
-
 typedef unsigned long (kprobe_check_cc)(unsigned long);
+typedef void (kprobe_insn_singlestep_t)(struct kprobe *, struct pt_regs *);
+typedef void (kprobe_insn_fn_t)(void);
 
 /* Architecture specific copy of original instruction. */
 struct arch_specific_insn {
-	kprobe_opcode_t		*insn;
-	kprobe_insn_handler_t	*insn_handler;
-	kprobe_check_cc		*insn_check_cc;
+	kprobe_opcode_t			*insn;
+	kprobe_insn_handler_t		*insn_handler;
+	kprobe_check_cc			*insn_check_cc;
+	kprobe_insn_singlestep_t	*insn_singlestep;
+	kprobe_insn_fn_t		*insn_fn;
 };
 
 struct prev_kprobe {
@@ -62,20 +59,9 @@ struct kprobe_ctlblk {
 };
 
 void arch_remove_kprobe(struct kprobe *);
-void kretprobe_trampoline(void);
-
 int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
 int kprobe_exceptions_notify(struct notifier_block *self,
 			     unsigned long val, void *data);
 
-enum kprobe_insn {
-	INSN_REJECTED,
-	INSN_GOOD,
-	INSN_GOOD_NO_SLOT
-};
-
-enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t,
-					struct arch_specific_insn *);
-void __init arm_kprobe_decode_init(void);
 
 #endif /* _ARM_KPROBES_H */

arch/arm/include/asm/mach/arch.h

@@ -23,6 +23,10 @@ struct machine_desc {
 
 	unsigned int		nr_irqs;	/* number of IRQs */
 
+#ifdef CONFIG_ZONE_DMA
+	unsigned long		dma_zone_size;	/* size of DMA-able area */
+#endif
+
 	unsigned int		video_start;	/* start of video RAM	*/
 	unsigned int		video_end;	/* end of video RAM	*/
 

arch/arm/include/asm/perf_event.h

@@ -24,6 +24,8 @@ enum arm_perf_pmu_ids {
 	ARM_PERF_PMU_ID_V6MP,
 	ARM_PERF_PMU_ID_CA8,
 	ARM_PERF_PMU_ID_CA9,
+	ARM_PERF_PMU_ID_CA5,
+	ARM_PERF_PMU_ID_CA15,
 	ARM_NUM_PMU_IDS,
 };
 

arch/arm/include/asm/ptrace.h

@@ -69,8 +69,9 @@
 #define PSR_c		0x000000ff	/* Control		*/
 
 /*
- * ARMv7 groups of APSR bits
+ * ARMv7 groups of PSR bits
  */
+#define APSR_MASK	0xf80f0000	/* N, Z, C, V, Q and GE flags */
 #define PSR_ISET_MASK	0x01000010	/* ISA state (J, T) mask */
 #define PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
 #define PSR_ENDIAN_MASK	0x00000200	/* Endianness state mask */
@@ -199,6 +200,14 @@ extern unsigned long profile_pc(struct pt_regs *regs);
 #define predicate(x)		((x) & 0xf0000000)
 #define PREDICATE_ALWAYS	0xe0000000
 
+/*
+ * True if instr is a 32-bit thumb instruction. This works if instr
+ * is the first or only half-word of a thumb instruction. It also works
+ * when instr holds all 32-bits of a wide thumb instruction if stored
+ * in the form (first_half<<16)|(second_half)
+ */
+#define is_wide_instruction(instr)	((unsigned)(instr) >= 0xe800)
+
 /*
  * kprobe-based event tracer support
  */

arch/arm/kernel/Makefile

@@ -37,7 +37,12 @@ obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
-obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
+obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-common.o
+ifdef CONFIG_THUMB2_KERNEL
+obj-$(CONFIG_KPROBES)		+= kprobes-thumb.o
+else
+obj-$(CONFIG_KPROBES)		+= kprobes-arm.o
+endif
 obj-$(CONFIG_ATAGS_PROC)	+= atags.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o

arch/arm/kernel/entry-armv.S

@@ -377,7 +377,7 @@ ENDPROC(__pabt_svc)
 	.endm
 
 	.macro	kuser_cmpxchg_check
-#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+#if !defined(CONFIG_CPU_32v6K) && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
 #ifndef CONFIG_MMU
 #warning "NPTL on non MMU needs fixing"
 #else
@@ -386,7 +386,7 @@ ENDPROC(__pabt_svc)
 	@ perform a quick test inline since it should be false
 	@ 99.9999% of the time.  The rest is done out of line.
 	cmp	r4, #TASK_SIZE
-	blhs	kuser_cmpxchg_fixup
+	blhs	kuser_cmpxchg64_fixup
 #endif
 #endif
 	.endm
@@ -701,31 +701,12 @@ ENDPROC(__switch_to)
 /*
  * User helpers.
  *
- * These are segment of kernel provided user code reachable from user space
- * at a fixed address in kernel memory.  This is used to provide user space
- * with some operations which require kernel help because of unimplemented
- * native feature and/or instructions in many ARM CPUs. The idea is for
- * this code to be executed directly in user mode for best efficiency but
- * which is too intimate with the kernel counter part to be left to user
- * libraries.  In fact this code might even differ from one CPU to another
- * depending on the available  instruction set and restrictions like on
- * SMP systems.  In other words, the kernel reserves the right to change
- * this code as needed without warning. Only the entry points and their
- * results are guaranteed to be stable.
- *
  * Each segment is 32-byte aligned and will be moved to the top of the high
  * vector page.  New segments (if ever needed) must be added in front of
  * existing ones.  This mechanism should be used only for things that are
  * really small and justified, and not be abused freely.
  *
- * User space is expected to implement those things inline when optimizing
- * for a processor that has the necessary native support, but only if such
- * resulting binaries are already to be incompatible with earlier ARM
- * processors due to the use of unsupported instructions other than what
- * is provided here.  In other words don't make binaries unable to run on
- * earlier processors just for the sake of not using these kernel helpers
- * if your compiled code is not going to use the new instructions for other
- * purpose.
+ * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
  */
  THUMB(	.arm	)
 
@@ -742,96 +723,103 @@ ENDPROC(__switch_to)
 __kuser_helper_start:
 
 /*
- * Reference prototype:
- *
- *	void __kernel_memory_barrier(void)
- *
- * Input:
- *
- *	lr = return address
- *
- * Output:
- *
- *	none
- *
- * Clobbered:
- *
- *	none
- *
- * Definition and user space usage example:
- *
- *	typedef void (__kernel_dmb_t)(void);
- *	#define __kernel_dmb (*(__kernel_dmb_t *)0xffff0fa0)
- *
- * Apply any needed memory barrier to preserve consistency with data modified
- * manually and __kuser_cmpxchg usage.
- *
- * This could be used as follows:
- *
- * #define __kernel_dmb() \
- *         asm volatile ( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #95" \
- *	        : : : "r0", "lr","cc" )
+ * Due to the length of some sequences, __kuser_cmpxchg64 spans 2 regular
+ * kuser "slots", therefore 0xffff0f80 is not used as a valid entry point.
  */
 
-__kuser_memory_barrier:				@ 0xffff0fa0
+__kuser_cmpxchg64:				@ 0xffff0f60
+
+#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+
+	/*
+	 * Poor you.  No fast solution possible...
+	 * The kernel itself must perform the operation.
+	 * A special ghost syscall is used for that (see traps.c).
+	 */
+	stmfd	sp!, {r7, lr}
+	ldr	r7, 1f			@ it's 20 bits
+	swi	__ARM_NR_cmpxchg64
+	ldmfd	sp!, {r7, pc}
+1:	.word	__ARM_NR_cmpxchg64
+
+#elif defined(CONFIG_CPU_32v6K)
+
+	stmfd	sp!, {r4, r5, r6, r7}
+	ldrd	r4, r5, [r0]			@ load old val
+	ldrd	r6, r7, [r1]			@ load new val
+	smp_dmb	arm
+1:	ldrexd	r0, r1, [r2]			@ load current val
+	eors	r3, r0, r4			@ compare with oldval (1)
+	eoreqs	r3, r1, r5			@ compare with oldval (2)
+	strexdeq r3, r6, r7, [r2]		@ store newval if eq
+	teqeq	r3, #1				@ success?
+	beq	1b				@ if no then retry
 	smp_dmb	arm
+	rsbs	r0, r3, #0			@ set returned val and C flag
+	ldmfd	sp!, {r4, r5, r6, r7}
+	bx	lr
+
+#elif !defined(CONFIG_SMP)
+
+#ifdef CONFIG_MMU
+
+	/*
+	 * The only thing that can break atomicity in this cmpxchg64
+	 * implementation is either an IRQ or a data abort exception
+	 * causing another process/thread to be scheduled in the middle of
+	 * the critical sequence.  The same strategy as for cmpxchg is used.
+	 */
+	stmfd	sp!, {r4, r5, r6, lr}
+	ldmia	r0, {r4, r5}			@ load old val
+	ldmia	r1, {r6, lr}			@ load new val
+1:	ldmia	r2, {r0, r1}			@ load current val
+	eors	r3, r0, r4			@ compare with oldval (1)
+	eoreqs	r3, r1, r5			@ compare with oldval (2)
+2:	stmeqia	r2, {r6, lr}			@ store newval if eq
+	rsbs	r0, r3, #0			@ set return val and C flag
+	ldmfd	sp!, {r4, r5, r6, pc}
+
+	.text
+kuser_cmpxchg64_fixup:
+	@ Called from kuser_cmpxchg_fixup.
+	@ r4 = address of interrupted insn (must be preserved).
+	@ sp = saved regs. r7 and r8 are clobbered.
+	@ 1b = first critical insn, 2b = last critical insn.
+	@ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
+	mov	r7, #0xffff0fff
+	sub	r7, r7, #(0xffff0fff - (0xffff0f60 + (1b - __kuser_cmpxchg64)))
+	subs	r8, r4, r7
+	rsbcss	r8, r8, #(2b - 1b)
+	strcs	r7, [sp, #S_PC]
+#if __LINUX_ARM_ARCH__ < 6
+	bcc	kuser_cmpxchg32_fixup
+#endif
+	mov	pc, lr
+	.previous
+
+#else
+#warning "NPTL on non MMU needs fixing"
+	mov	r0, #-1
+	adds	r0, r0, #0
 	usr_ret	lr
+#endif
+
+#else
+#error "incoherent kernel configuration"
+#endif
+
+	/* pad to next slot */
+	.rept	(16 - (. - __kuser_cmpxchg64)/4)
+	.word	0
+	.endr
 
 	.align	5
 
-/*
- * Reference prototype:
- *
- *	int __kernel_cmpxchg(int oldval, int newval, int *ptr)
- *
- * Input:
- *
- *	r0 = oldval
- *	r1 = newval
- *	r2 = ptr
- *	lr = return address
- *
- * Output:
- *
- *	r0 = returned value (zero or non-zero)
- *	C flag = set if r0 == 0, clear if r0 != 0
- *
- * Clobbered:
- *
- *	r3, ip, flags
- *
- * Definition and user space usage example:
- *
- *	typedef int (__kernel_cmpxchg_t)(int oldval, int newval, int *ptr);
- *	#define __kernel_cmpxchg (*(__kernel_cmpxchg_t *)0xffff0fc0)
- *
- * Atomically store newval in *ptr if *ptr is equal to oldval for user space.
- * Return zero if *ptr was changed or non-zero if no exchange happened.
- * The C flag is also set if *ptr was changed to allow for assembly
- * optimization in the calling code.
- *
- * Notes:
- *
- *    - This routine already includes memory barriers as needed.
- *
- * For example, a user space atomic_add implementation could look like this:
- *
- * #define atomic_add(ptr, val) \
- *	({ register unsigned int *__ptr asm("r2") = (ptr); \
- *	   register unsigned int __result asm("r1"); \
- *	   asm volatile ( \
- *	       "1: @ atomic_add\n\t" \
- *	       "ldr	r0, [r2]\n\t" \
- *	       "mov	r3, #0xffff0fff\n\t" \
- *	       "add	lr, pc, #4\n\t" \
- *	       "add	r1, r0, %2\n\t" \
- *	       "add	pc, r3, #(0xffff0fc0 - 0xffff0fff)\n\t" \
- *	       "bcc	1b" \
- *	       : "=&r" (__result) \
- *	       : "r" (__ptr), "rIL" (val) \
- *	       : "r0","r3","ip","lr","cc","memory" ); \
- *	   __result; })
- */
+__kuser_memory_barrier:				@ 0xffff0fa0
+	smp_dmb	arm
+	usr_ret	lr
+
+	.align	5
 
 __kuser_cmpxchg:				@ 0xffff0fc0
 
@@ -868,7 +856,7 @@ __kuser_cmpxchg:				@ 0xffff0fc0
 	usr_ret	lr
 
 	.text
-kuser_cmpxchg_fixup:
+kuser_cmpxchg32_fixup:
 	@ Called from kuser_cmpxchg_check macro.
 	@ r4 = address of interrupted insn (must be preserved).
 	@ sp = saved regs. r7 and r8 are clobbered.
@@ -906,39 +894,6 @@ kuser_cmpxchg_fixup:
 
 	.align	5
 
-/*
- * Reference prototype:
- *
- *	int __kernel_get_tls(void)
- *
- * Input:
- *
- *	lr = return address
- *
- * Output:
- *
- *	r0 = TLS value
- *
- * Clobbered:
- *
- *	none
- *
- * Definition and user space usage example:
- *
- *	typedef int (__kernel_get_tls_t)(void);
- *	#define __kernel_get_tls (*(__kernel_get_tls_t *)0xffff0fe0)
- *
- * Get the TLS value as previously set via the __ARM_NR_set_tls syscall.
- *
- * This could be used as follows:
- *
- * #define __kernel_get_tls() \
- *	({ register unsigned int __val asm("r0"); \
- *         asm( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #31" \
- *	        : "=r" (__val) : : "lr","cc" ); \
- *	   __val; })
- */
-
 __kuser_get_tls:				@ 0xffff0fe0
 	ldr	r0, [pc, #(16 - 8)]	@ read TLS, set in kuser_get_tls_init
 	usr_ret	lr
@@ -947,19 +902,6 @@ __kuser_get_tls:				@ 0xffff0fe0
 	.word	0			@ 0xffff0ff0 software TLS value, then
 	.endr				@ pad up to __kuser_helper_version
 
-/*
- * Reference declaration:
- *
- *	extern unsigned int __kernel_helper_version;
- *
- * Definition and user space usage example:
- *
- *	#define __kernel_helper_version (*(unsigned int *)0xffff0ffc)
- *
- * User space may read this to determine the curent number of helpers
- * available.
- */
-
 __kuser_helper_version:				@ 0xffff0ffc
 	.word	((__kuser_helper_end - __kuser_helper_start) >> 5)
 

arch/arm/kernel/entry-header.S

@@ -121,15 +121,13 @@
 	.endm
 #else	/* CONFIG_THUMB2_KERNEL */
 	.macro	svc_exit, rpsr
+	ldr	lr, [sp, #S_SP]			@ top of the stack
+	ldrd	r0, r1, [sp, #S_LR]		@ calling lr and pc
 	clrex					@ clear the exclusive monitor
-	ldr	r0, [sp, #S_SP]			@ top of the stack
-	ldr	r1, [sp, #S_PC]			@ return address
-	tst	r0, #4				@ orig stack 8-byte aligned?
-	stmdb	r0, {r1, \rpsr}			@ rfe context
+	stmdb	lr!, {r0, r1, \rpsr}		@ calling lr and rfe context
 	ldmia	sp, {r0 - r12}
-	ldr	lr, [sp, #S_LR]
-	addeq	sp, sp, #S_FRAME_SIZE - 8	@ aligned
-	addne	sp, sp, #S_FRAME_SIZE - 4	@ not aligned
+	mov	sp, lr
+	ldr	lr, [sp], #4
 	rfeia	sp!
 	.endm
 

arch/arm/kernel/perf_event.c

@@ -662,6 +662,12 @@ init_hw_perf_events(void)
 		case 0xC090:	/* Cortex-A9 */
 			armpmu = armv7_a9_pmu_init();
 			break;
+		case 0xC050:	/* Cortex-A5 */
+			armpmu = armv7_a5_pmu_init();
+			break;
+		case 0xC0F0:	/* Cortex-A15 */
+			armpmu = armv7_a15_pmu_init();
+			break;
 		}
 	/* Intel CPUs [xscale]. */
 	} else if (0x69 == implementor) {

arch/arm/kernel/ptrace.c

@@ -228,34 +228,12 @@ static struct undef_hook thumb_break_hook = {
 	.fn		= break_trap,
 };
 
-static int thumb2_break_trap(struct pt_regs *regs, unsigned int instr)
-{
-	unsigned int instr2;
-	void __user *pc;
-
-	/* Check the second half of the instruction.  */
-	pc = (void __user *)(instruction_pointer(regs) + 2);
-
-	if (processor_mode(regs) == SVC_MODE) {
-		instr2 = *(u16 *) pc;
-	} else {
-		get_user(instr2, (u16 __user *)pc);
-	}
-
-	if (instr2 == 0xa000) {
-		ptrace_break(current, regs);
-		return 0;
-	} else {
-		return 1;
-	}
-}
-
 static struct undef_hook thumb2_break_hook = {
-	.instr_mask	= 0xffff,
-	.instr_val	= 0xf7f0,
+	.instr_mask	= 0xffffffff,
+	.instr_val	= 0xf7f0a000,
 	.cpsr_mask	= PSR_T_BIT,
 	.cpsr_val	= PSR_T_BIT,
-	.fn		= thumb2_break_trap,
+	.fn		= break_trap,
 };
 
 static int __init ptrace_break_init(void)

arch/arm/kernel/setup.c

@@ -919,6 +919,12 @@ void __init setup_arch(char **cmdline_p)
 
 	tcm_init();
 
+#ifdef CONFIG_ZONE_DMA
+	if (mdesc->dma_zone_size) {
+		extern unsigned long arm_dma_zone_size;
+		arm_dma_zone_size = mdesc->dma_zone_size;
+	}
+#endif
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	handle_arch_irq = mdesc->handle_irq;
 #endif
@@ -980,6 +986,10 @@ static const char *hwcap_str[] = {
 	"neon",
 	"vfpv3",
 	"vfpv3d16",
+	"tls",
+	"vfpv4",
+	"idiva",
+	"idivt",
 	NULL
 };
 

arch/arm/kernel/traps.c

@@ -355,9 +355,24 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	pc = (void __user *)instruction_pointer(regs);
 
 	if (processor_mode(regs) == SVC_MODE) {
-		instr = *(u32 *) pc;
+#ifdef CONFIG_THUMB2_KERNEL
+		if (thumb_mode(regs)) {
+			instr = ((u16 *)pc)[0];
+			if (is_wide_instruction(instr)) {
+				instr <<= 16;
+				instr |= ((u16 *)pc)[1];
+			}
+		} else
+#endif
+			instr = *(u32 *) pc;
 	} else if (thumb_mode(regs)) {
 		get_user(instr, (u16 __user *)pc);
+		if (is_wide_instruction(instr)) {
+			unsigned int instr2;
+			get_user(instr2, (u16 __user *)pc+1);
+			instr <<= 16;
+			instr |= instr2;
+		}
 	} else {
 		get_user(instr, (u32 __user *)pc);
 	}

arch/arm/mach-davinci/board-da830-evm.c

@@ -681,4 +681,5 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= da830_evm_init,
+	.dma_zone_size	= SZ_128M,
 MACHINE_END

arch/arm/mach-davinci/board-da850-evm.c

@@ -1261,4 +1261,5 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= da850_evm_init,
+	.dma_zone_size	= SZ_128M,
 MACHINE_END

arch/arm/mach-davinci/board-dm355-evm.c

@@ -356,4 +356,5 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_evm_init,
+	.dma_zone_size	= SZ_128M,
 MACHINE_END

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -275,4 +275,5 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_leopard_init,
+	.dma_zone_size	= SZ_128M,
 MACHINE_END

arch/arm/mach-davinci/board-dm365-evm.c

@@ -617,5 +617,6 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
 	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
 	.init_machine	= dm365_evm_init,
+	.dma_zone_size	= SZ_128M,
 MACHINE_END
 

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -717,4 +717,5 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_evm_init,
+	.dma_zone_size	= SZ_128M,
 MACHINE_END

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -802,6 +802,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
+	.dma_zone_size	= SZ_128M,
 MACHINE_END
 
 MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
@@ -810,5 +811,6 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
 	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
+	.dma_zone_size	= SZ_128M,
 MACHINE_END
 

arch/arm/mach-davinci/board-mityomapl138.c

@@ -570,4 +570,5 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= mityomapl138_init,
+	.dma_zone_size	= SZ_128M,
 MACHINE_END

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -277,4 +277,5 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
 	.init_machine = davinci_ntosd2_init,
+	.dma_zone_size	= SZ_128M,
 MACHINE_END

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -343,4 +343,5 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= omapl138_hawk_init,
+	.dma_zone_size	= SZ_128M,
 MACHINE_END

arch/arm/mach-davinci/board-sffsdr.c

@@ -156,4 +156,5 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_sffsdr_init,
+	.dma_zone_size	= SZ_128M,
 MACHINE_END

arch/arm/mach-davinci/board-tnetv107x-evm.c

@@ -282,4 +282,5 @@ MACHINE_START(TNETV107X, "TNETV107X EVM")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= tnetv107x_evm_board_init,
+	.dma_zone_size	= SZ_128M,
 MACHINE_END

arch/arm/mach-davinci/include/mach/memory.h

@@ -41,11 +41,4 @@
  */
 #define CONSISTENT_DMA_SIZE (14<<20)
 
-/*
- * Restrict DMA-able region to workaround silicon bug.  The bug
- * restricts buffers available for DMA to video hardware to be
- * below 128M
- */
-#define ARM_DMA_ZONE_SIZE	SZ_128M
-
 #endif /* __ASM_ARCH_MEMORY_H */

arch/arm/mach-h720x/h7201-eval.c

@@ -33,4 +33,5 @@ MACHINE_START(H7201, "Hynix GMS30C7201")
 	.map_io		= h720x_map_io,
 	.init_irq	= h720x_init_irq,
 	.timer		= &h7201_timer,
+	.dma_zone_size	= SZ_256M,
 MACHINE_END

arch/arm/mach-h720x/h7202-eval.c

@@ -76,4 +76,5 @@ MACHINE_START(H7202, "Hynix HMS30C7202")
 	.init_irq	= h7202_init_irq,
 	.timer		= &h7202_timer,
 	.init_machine	= init_eval_h7202,
+	.dma_zone_size	= SZ_256M,
 MACHINE_END

arch/arm/mach-h720x/include/mach/memory.h

@@ -8,11 +8,4 @@
 #define __ASM_ARCH_MEMORY_H
 
 #define PLAT_PHYS_OFFSET	UL(0x40000000)
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define ARM_DMA_ZONE_SIZE	SZ_256M
-
 #endif