Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull more clk updates from Stephen Boyd:
 "This is the second batch of clk driver updates that needed a little
  more time to soak in linux-next.

   - Use modern i2c probe in vc5

   - Cleanup some includes

   - Update links to datasheets

   - Add UniPhier NX1 SoC clk support

   - Fix DT bindings for SiFive FU740

   - Revert the module platform driver support for Rockchip because it
     wasn't actually tested

   - Fix the composite clk code again as the previous fix had a one line
     bug that broke rate changes for clks that want to use the same
     parent still

   - Use the right table for a divider in ast2600 driver

   - Get rid of gcc_aggre1_pnoc_ahb_clk in qcom clk driver again because
     its critical but unused"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk
  clk: imx8m: Do not set IMX_COMPOSITE_CORE for non-regular composites
  clk/ast2600: Fix soc revision for AHB
  clk: composite: Fix 'switching' to same clock
  clk: rockchip: drop module parts from rk3399 and rk3568 drivers
  Revert "clk: rockchip: use module_platform_driver_probe"
  clk:mediatek: remove duplicate include in clk-mt8195-imp_iic_wrap.c
  dt-bindings: clock: fu740-prci: add reset-cells
  clk: uniphier: Add SoC-glue clock source selector support for Pro4
  dt-bindings: clock: uniphier: Add clock binding for SoC-glue
  clk: uniphier: Add NX1 clock support
  dt-bindings: clock: uniphier: Add NX1 clock binding
  clk: uniphier: Add audio system and video input clock control for PXs3
  clk: si5351: Update datasheet references
  clk: vc5: Use i2c .probe_new
  clk/actions/owl-factor.c: remove superfluous headers
  clk: ingenic: Fix bugs with divided dividers

Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml

@@ -42,6 +42,9 @@ properties:
   "#clock-cells":
     const: 1
 
+  "#reset-cells":
+    const: 1
+
 required:
   - compatible
   - reg
@@ -57,4 +60,5 @@ examples:
       reg = <0x10000000 0x1000>;
       clocks = <&hfclk>, <&rtcclk>;
       #clock-cells = <1>;
+      #reset-cells = <1>;
     };

Documentation/devicetree/bindings/clock/silabs,si5351.txt

@@ -2,7 +2,7 @@ Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
 
 Reference
 [1] Si5351A/B/C Data Sheet
-    https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
+    https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
 
 The Si5351a/b/c are programmable i2c clock generators with up to 8 output
 clocks. Si5351a also has a reduced pin-count package (MSOP10) where only

Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml

@@ -23,6 +23,7 @@ properties:
           - socionext,uniphier-ld11-clock
           - socionext,uniphier-ld20-clock
           - socionext,uniphier-pxs3-clock
+          - socionext,uniphier-nx1-clock
       - description: Media I/O (MIO) clock, SD clock
         enum:
           - socionext,uniphier-ld4-mio-clock
@@ -33,6 +34,7 @@ properties:
           - socionext,uniphier-ld11-mio-clock
           - socionext,uniphier-ld20-sd-clock
           - socionext,uniphier-pxs3-sd-clock
+          - socionext,uniphier-nx1-sd-clock
       - description: Peripheral clock
         enum:
           - socionext,uniphier-ld4-peri-clock
@@ -43,6 +45,10 @@ properties:
           - socionext,uniphier-ld11-peri-clock
           - socionext,uniphier-ld20-peri-clock
           - socionext,uniphier-pxs3-peri-clock
+          - socionext,uniphier-nx1-peri-clock
+      - description: SoC-glue clock
+        enum:
+          - socionext,uniphier-pro4-sg-clock
 
   "#clock-cells":
     const: 1

drivers/clk/actions/owl-factor.c

@@ -10,7 +10,6 @@
 
 #include <linux/clk-provider.h>
 #include <linux/regmap.h>
-#include <linux/slab.h>
 
 #include "owl-factor.h"
 

drivers/clk/clk-ast2600.c

@@ -51,6 +51,8 @@ static DEFINE_SPINLOCK(aspeed_g6_clk_lock);
 static struct clk_hw_onecell_data *aspeed_g6_clk_data;
 
 static void __iomem *scu_g6_base;
+/* AST2600 revision: A0, A1, A2, etc */
+static u8 soc_rev;
 
 /*
  * Clocks marked with CLK_IS_CRITICAL:
@@ -191,9 +193,8 @@ static struct clk_hw *ast2600_calc_pll(const char *name, u32 val)
 static struct clk_hw *ast2600_calc_apll(const char *name, u32 val)
 {
 	unsigned int mult, div;
-	u32 chip_id = readl(scu_g6_base + ASPEED_G6_SILICON_REV);
 
-	if (((chip_id & CHIP_REVISION_ID) >> 16) >= 2) {
+	if (soc_rev >= 2) {
 		if (val & BIT(24)) {
 			/* Pass through mode */
 			mult = div = 1;
@@ -707,7 +708,7 @@ static const u32 ast2600_a1_axi_ahb200_tbl[] = {
 static void __init aspeed_g6_cc(struct regmap *map)
 {
 	struct clk_hw *hw;
-	u32 val, div, divbits, chip_id, axi_div, ahb_div;
+	u32 val, div, divbits, axi_div, ahb_div;
 
 	clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000);
 
@@ -738,8 +739,7 @@ static void __init aspeed_g6_cc(struct regmap *map)
 		axi_div = 2;
 
 	divbits = (val >> 11) & 0x3;
-	regmap_read(map, ASPEED_G6_SILICON_REV, &chip_id);
-	if (chip_id & BIT(16)) {
+	if (soc_rev >= 1) {
 		if (!divbits) {
 			ahb_div = ast2600_a1_axi_ahb200_tbl[(val >> 8) & 0x3];
 			if (val & BIT(16))
@@ -784,6 +784,8 @@ static void __init aspeed_g6_cc_init(struct device_node *np)
 	if (!scu_g6_base)
 		return;
 
+	soc_rev = (readl(scu_g6_base + ASPEED_G6_SILICON_REV) & CHIP_REVISION_ID) >> 16;
+
 	aspeed_g6_clk_data = kzalloc(struct_size(aspeed_g6_clk_data, hws,
 				      ASPEED_G6_NUM_CLKS), GFP_KERNEL);
 	if (!aspeed_g6_clk_data)

drivers/clk/clk-composite.c

@@ -97,6 +97,7 @@ static int clk_composite_determine_rate(struct clk_hw *hw,
 				return ret;
 
 			req->rate = tmp_req.rate;
+			req->best_parent_hw = tmp_req.best_parent_hw;
 			req->best_parent_rate = tmp_req.best_parent_rate;
 
 			return 0;

drivers/clk/clk-si5351.c

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * clk-si5351.c: Silicon Laboratories Si5351A/B/C I2C Clock Generator
+ * clk-si5351.c: Skyworks / Silicon Labs Si5351A/B/C I2C Clock Generator
  *
  * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
  * Rabeeh Khoury <rabeeh@solid-run.com>
  *
  * References:
  * [1] "Si5351A/B/C Data Sheet"
- *     https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
- * [2] "Manually Generating an Si5351 Register Map"
- *     https://www.silabs.com/Support%20Documents/TechnicalDocs/AN619.pdf
+ *     https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
+ * [2] "AN619: Manually Generating an Si5351 Register Map"
+ *     https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/application-notes/AN619.pdf
  */
 
 #include <linux/module.h>

drivers/clk/clk-si5351.h

 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * clk-si5351.h: Silicon Laboratories Si5351A/B/C I2C Clock Generator
+ * clk-si5351.h: Skyworks / Silicon Labs Si5351A/B/C I2C Clock Generator
  *
  * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
  * Rabeeh Khoury <rabeeh@solid-run.com>

drivers/clk/clk-versaclock5.c

@@ -905,7 +905,7 @@ static int vc5_get_output_config(struct i2c_client *client,
 
 static const struct of_device_id clk_vc5_of_match[];
 
-static int vc5_probe(struct i2c_client *client, const struct i2c_device_id *id)
+static int vc5_probe(struct i2c_client *client)
 {
 	unsigned int oe, sd, src_mask = 0, src_val = 0;
 	struct vc5_driver_data *vc5;
@@ -1244,7 +1244,7 @@ static struct i2c_driver vc5_driver = {
 		.pm	= &vc5_pm_ops,
 		.of_match_table = clk_vc5_of_match,
 	},
-	.probe		= vc5_probe,
+	.probe_new	= vc5_probe,
 	.remove		= vc5_remove,
 	.id_table	= vc5_id,
 };

drivers/clk/imx/clk.h

@@ -391,11 +391,11 @@ struct clk_hw *__imx8m_clk_hw_composite(const char *name,
 
 #define imx8m_clk_hw_composite(name, parent_names, reg) \
 	_imx8m_clk_hw_composite(name, parent_names, reg, \
-			IMX_COMPOSITE_CORE, IMX_COMPOSITE_CLK_FLAGS_DEFAULT)
+			0, IMX_COMPOSITE_CLK_FLAGS_DEFAULT)
 
 #define imx8m_clk_hw_composite_critical(name, parent_names, reg) \
 	_imx8m_clk_hw_composite(name, parent_names, reg, \
-			IMX_COMPOSITE_CORE, IMX_COMPOSITE_CLK_FLAGS_CRITICAL)
+			0, IMX_COMPOSITE_CLK_FLAGS_CRITICAL)
 
 #define imx8m_clk_hw_composite_bus(name, parent_names, reg)	\
 	_imx8m_clk_hw_composite(name, parent_names, reg, \

drivers/clk/ingenic/cgu.c

@@ -453,15 +453,15 @@ ingenic_clk_calc_div(struct clk_hw *hw,
 	}
 
 	/* Impose hardware constraints */
-	div = min_t(unsigned, div, 1 << clk_info->div.bits);
-	div = max_t(unsigned, div, 1);
+	div = clamp_t(unsigned int, div, clk_info->div.div,
+		      clk_info->div.div << clk_info->div.bits);
 
 	/*
 	 * If the divider value itself must be divided before being written to
 	 * the divider register, we must ensure we don't have any bits set that
 	 * would be lost as a result of doing so.
 	 */
-	div /= clk_info->div.div;
+	div = DIV_ROUND_UP(div, clk_info->div.div);
 	div *= clk_info->div.div;
 
 	return div;

drivers/clk/mediatek/clk-mt8195-imp_iic_wrap.c

@@ -10,8 +10,6 @@
 #include <linux/clk-provider.h>
 #include <linux/platform_device.h>
 
-#include <dt-bindings/clock/mt8195-clk.h>
-
 static const struct mtk_gate_regs imp_iic_wrap_cg_regs = {
 	.set_ofs = 0xe08,
 	.clr_ofs = 0xe04,

drivers/clk/qcom/gcc-msm8996.c

@@ -2937,20 +2937,6 @@ static struct clk_branch gcc_smmu_aggre0_ahb_clk = {
 	},
 };
 
-static struct clk_branch gcc_aggre1_pnoc_ahb_clk = {
-	.halt_reg = 0x82014,
-	.clkr = {
-		.enable_reg = 0x82014,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "gcc_aggre1_pnoc_ahb_clk",
-			.parent_names = (const char *[]){ "periph_noc_clk_src" },
-			.num_parents = 1,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
 static struct clk_branch gcc_aggre2_ufs_axi_clk = {
 	.halt_reg = 0x83014,
 	.clkr = {
@@ -3474,7 +3460,6 @@ static struct clk_regmap *gcc_msm8996_clocks[] = {
 	[GCC_AGGRE0_CNOC_AHB_CLK] = &gcc_aggre0_cnoc_ahb_clk.clkr,
 	[GCC_SMMU_AGGRE0_AXI_CLK] = &gcc_smmu_aggre0_axi_clk.clkr,
 	[GCC_SMMU_AGGRE0_AHB_CLK] = &gcc_smmu_aggre0_ahb_clk.clkr,
-	[GCC_AGGRE1_PNOC_AHB_CLK] = &gcc_aggre1_pnoc_ahb_clk.clkr,
 	[GCC_AGGRE2_UFS_AXI_CLK] = &gcc_aggre2_ufs_axi_clk.clkr,
 	[GCC_AGGRE2_USB3_AXI_CLK] = &gcc_aggre2_usb3_axi_clk.clkr,
 	[GCC_QSPI_AHB_CLK] = &gcc_qspi_ahb_clk.clkr,

drivers/clk/rockchip/Kconfig

@@ -80,14 +80,14 @@ config CLK_RK3368
 	  Build the driver for RK3368 Clock Driver.
 
 config CLK_RK3399
-	tristate "Rockchip RK3399 clock controller support"
+	bool "Rockchip RK3399 clock controller support"
 	depends on ARM64 || COMPILE_TEST
 	default y
 	help
 	  Build the driver for RK3399 Clock Driver.
 
 config CLK_RK3568
-	tristate "Rockchip RK3568 clock controller support"
+	bool "Rockchip RK3568 clock controller support"
 	depends on ARM64 || COMPILE_TEST
 	default y
 	help

drivers/clk/rockchip/clk-rk3399.c

@@ -1630,7 +1630,6 @@ static const struct of_device_id clk_rk3399_match_table[] = {
 	},
 	{ }
 };
-MODULE_DEVICE_TABLE(of, clk_rk3399_match_table);
 
 static int __init clk_rk3399_probe(struct platform_device *pdev)
 {
@@ -1656,7 +1655,4 @@ static struct platform_driver clk_rk3399_driver = {
 		.suppress_bind_attrs = true,
 	},
 };
-module_platform_driver_probe(clk_rk3399_driver, clk_rk3399_probe);
-
-MODULE_DESCRIPTION("Rockchip RK3399 Clock Driver");
-MODULE_LICENSE("GPL");
+builtin_platform_driver_probe(clk_rk3399_driver, clk_rk3399_probe);

drivers/clk/rockchip/clk-rk3568.c

@@ -1693,7 +1693,6 @@ static const struct of_device_id clk_rk3568_match_table[] = {
 	},
 	{ }
 };
-MODULE_DEVICE_TABLE(of, clk_rk3568_match_table);
 
 static int __init clk_rk3568_probe(struct platform_device *pdev)
 {
@@ -1719,7 +1718,4 @@ static struct platform_driver clk_rk3568_driver = {
 		.suppress_bind_attrs = true,
 	},
 };
-module_platform_driver_probe(clk_rk3568_driver, clk_rk3568_probe);
-
-MODULE_DESCRIPTION("Rockchip RK3568 Clock Driver");
-MODULE_LICENSE("GPL");
+builtin_platform_driver_probe(clk_rk3568_driver, clk_rk3568_probe);

drivers/clk/uniphier/clk-uniphier-core.c

@@ -132,6 +132,10 @@ static const struct of_device_id uniphier_clk_match[] = {
 		.compatible = "socionext,uniphier-pxs3-clock",
 		.data = uniphier_pxs3_sys_clk_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-clock",
+		.data = uniphier_nx1_sys_clk_data,
+	},
 	/* Media I/O clock, SD clock */
 	{
 		.compatible = "socionext,uniphier-ld4-mio-clock",
@@ -165,6 +169,10 @@ static const struct of_device_id uniphier_clk_match[] = {
 		.compatible = "socionext,uniphier-pxs3-sd-clock",
 		.data = uniphier_pro5_sd_clk_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-sd-clock",
+		.data = uniphier_pro5_sd_clk_data,
+	},
 	/* Peripheral clock */
 	{
 		.compatible = "socionext,uniphier-ld4-peri-clock",
@@ -198,6 +206,15 @@ static const struct of_device_id uniphier_clk_match[] = {
 		.compatible = "socionext,uniphier-pxs3-peri-clock",
 		.data = uniphier_pro4_peri_clk_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	/* SoC-glue clock */
+	{
+		.compatible = "socionext,uniphier-pro4-sg-clock",
+		.data = uniphier_pro4_sg_clk_data,
+	},
 	{ /* sentinel */ }
 };
 

drivers/clk/uniphier/clk-uniphier-sys.c

@@ -20,6 +20,10 @@
 	UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 10),		\
 	UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 15)
 
+#define UNIPHIER_NX1_SYS_CLK_SD						\
+	UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 4),		\
+	UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 6)
+
 #define UNIPHIER_LD4_SYS_CLK_NAND(idx)					\
 	UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 32),		\
 	UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x2104, 2)
@@ -288,6 +292,8 @@ const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = {
 	UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x210c, 7),
 	UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x210c, 8),
 	UNIPHIER_CLK_GATE("sata-phy", 30, NULL, 0x210c, 21),
+	UNIPHIER_LD11_SYS_CLK_AIO(40),
+	UNIPHIER_LD11_SYS_CLK_EXIV(42),
 	/* CPU gears */
 	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
 	UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
@@ -300,3 +306,44 @@ const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = {
 			     "spll/4", "spll/8", "s2pll/4", "s2pll/8"),
 	{ /* sentinel */ }
 };
+
+const struct uniphier_clk_data uniphier_nx1_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 100, 1),		/* ARM: 2500 MHz */
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 32, 1),		/* 800 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 6),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
+	UNIPHIER_NX1_SYS_CLK_SD,
+	UNIPHIER_CLK_GATE("emmc", 4, NULL, 0x2108, 8),
+	UNIPHIER_CLK_GATE("ether", 6, NULL, 0x210c, 0),
+	UNIPHIER_CLK_GATE("usb30-0", 12, NULL, 0x210c, 16),	/* =GIO */
+	UNIPHIER_CLK_GATE("usb30-1", 13, NULL, 0x210c, 20),	/* =GIO1P */
+	UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 24),
+	UNIPHIER_CLK_GATE("usb30-ssphy0", 17, NULL, 0x210c, 25),
+	UNIPHIER_CLK_GATE("usb30-ssphy1", 18, NULL, 0x210c, 26),
+	UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 8),
+	UNIPHIER_CLK_GATE("voc", 52, NULL, 0x2110, 0),
+	UNIPHIER_CLK_GATE("hdmitx", 58, NULL, 0x2110, 8),
+	/* CPU gears */
+	UNIPHIER_CLK_DIV5("cpll", 2, 4, 8, 16, 32),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 5,
+			     "cpll/2", "cpll/4", "cpll/8", "cpll/16",
+			     "cpll/32"),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro4_sg_clk_data[] = {
+	UNIPHIER_CLK_DIV("gpll", 4),
+	{
+		.name = "sata-ref",
+		.type = UNIPHIER_CLK_TYPE_MUX,
+		.idx = 0,
+		.data.mux = {
+			.parent_names = { "gpll/4", "ref", },
+			.num_parents = 2,
+			.reg = 0x1a28,
+			.masks = { 0x1, 0x1, },
+			.vals  = { 0x0, 0x1, },
+		},
+	},
+	{ /* sentinel */ }
+};

drivers/clk/uniphier/clk-uniphier.h

@@ -119,6 +119,10 @@ struct uniphier_clk_data {
 	UNIPHIER_CLK_DIV2(parent, div0, div1),			\
 	UNIPHIER_CLK_DIV2(parent, div2, div3)
 
+#define UNIPHIER_CLK_DIV5(parent, div0, div1, div2, div3, div4)	\
+	UNIPHIER_CLK_DIV4(parent, div0, div1, div2, div3),	\
+	UNIPHIER_CLK_DIV(parent, div4)
+
 struct clk_hw *uniphier_clk_register_cpugear(struct device *dev,
 					     struct regmap *regmap,
 					     const char *name,
@@ -146,9 +150,11 @@ extern const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld11_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld20_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_nx1_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld4_mio_clk_data[];
 extern const struct uniphier_clk_data uniphier_pro5_sd_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[];
 extern const struct uniphier_clk_data uniphier_pro4_peri_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro4_sg_clk_data[];
 
 #endif /* __CLK_UNIPHIER_H__ */