drm/msm/dsi: fix check-before-set in the 7nm dsi_pll code

Fix setting min/max DSI PLL rate for the V4.1 7nm DSI PLL (used on
sm8250). Current code checks for pll->type before it is set (as it is
set in the msm_dsi_pll_init() after calling device-specific functions.

Cc: Jonathan Marek <jonathan@marek.ca>
Fixes: 1ef7c99d ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drivers/gpu/drm/msm/dsi/pll/dsi_pll.c

@@ -163,7 +163,7 @@ struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev,
 		break;
 	case MSM_DSI_PHY_7NM:
 	case MSM_DSI_PHY_7NM_V4_1:
-		pll = msm_dsi_pll_7nm_init(pdev, id);
+		pll = msm_dsi_pll_7nm_init(pdev, type, id);
 		break;
 	default:
 		pll = ERR_PTR(-ENXIO);

drivers/gpu/drm/msm/dsi/pll/dsi_pll.h

@@ -117,10 +117,12 @@ msm_dsi_pll_10nm_init(struct platform_device *pdev, int id)
 }
 #endif
 #ifdef CONFIG_DRM_MSM_DSI_7NM_PHY
-struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev, int id);
+struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev,
+					enum msm_dsi_phy_type type, int id);
 #else
 static inline struct msm_dsi_pll *
-msm_dsi_pll_7nm_init(struct platform_device *pdev, int id)
+msm_dsi_pll_7nm_init(struct platform_device *pdev,
+					enum msm_dsi_phy_type type, int id)
 {
 	return ERR_PTR(-ENODEV);
 }

drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c

@@ -852,7 +852,8 @@ static int pll_7nm_register(struct dsi_pll_7nm *pll_7nm)
 	return ret;
 }
 
-struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev, int id)
+struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev,
+					enum msm_dsi_phy_type type, int id)
 {
 	struct dsi_pll_7nm *pll_7nm;
 	struct msm_dsi_pll *pll;
@@ -885,7 +886,7 @@ struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev, int id)
 	pll = &pll_7nm->base;
 	pll->min_rate = 1000000000UL;
 	pll->max_rate = 3500000000UL;
-	if (pll->type == MSM_DSI_PHY_7NM_V4_1) {
+	if (type == MSM_DSI_PHY_7NM_V4_1) {
 		pll->min_rate = 600000000UL;
 		pll->max_rate = (unsigned long)5000000000ULL;
 		/* workaround for max rate overflowing on 32-bit builds: */