net/mlx5: Adjustments for the activate LAG logic to run under sriov

When HW lag is set/unset, roce must not be enabled on the port, as such
we wrap such changes with roce enable/disable either directly or through
re-creation of IB device.

Currently, lag and sriov are mutually exclusive, so by definition this
code doesn't run under sriov.

Towards changing this exclusion, we need to make sure that roce will not
be enabled on the eswitch manager port under sriov since this is
requirement of the switchdev mode.

We are going strict here and avoiding this all together under sriov.
Signed-off-by: Rabie Loulou <rabiel@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/lag.c

@@ -34,6 +34,7 @@
 #include <linux/mlx5/driver.h>
 #include <linux/mlx5/vport.h>
 #include "mlx5_core.h"
+#include "eswitch.h"
 
 enum {
 	MLX5_LAG_FLAG_BONDED = 1 << 0,
@@ -257,13 +258,15 @@ static void mlx5_do_bond(struct mlx5_lag *ldev)
 {
 	struct mlx5_core_dev *dev0 = ldev->pf[0].dev;
 	struct mlx5_core_dev *dev1 = ldev->pf[1].dev;
+	bool do_bond, sriov_enabled;
 	struct lag_tracker tracker;
 	int i;
-	bool do_bond;
 
 	if (!dev0 || !dev1)
 		return;
 
+	sriov_enabled = mlx5_sriov_is_enabled(dev0) || mlx5_sriov_is_enabled(dev1);
+
 	mutex_lock(&lag_mutex);
 	tracker = ldev->tracker;
 	mutex_unlock(&lag_mutex);
@@ -271,26 +274,32 @@ static void mlx5_do_bond(struct mlx5_lag *ldev)
 	do_bond = tracker.is_bonded && ldev->allowed;
 
 	if (do_bond && !mlx5_lag_is_bonded(ldev)) {
-		for (i = 0; i < MLX5_MAX_PORTS; i++)
-			mlx5_remove_dev_by_protocol(ldev->pf[i].dev,
-						    MLX5_INTERFACE_PROTOCOL_IB);
+		if (!sriov_enabled)
+			for (i = 0; i < MLX5_MAX_PORTS; i++)
+				mlx5_remove_dev_by_protocol(ldev->pf[i].dev,
+							    MLX5_INTERFACE_PROTOCOL_IB);
 
 		mlx5_activate_lag(ldev, &tracker);
 
-		mlx5_add_dev_by_protocol(dev0, MLX5_INTERFACE_PROTOCOL_IB);
-		mlx5_nic_vport_enable_roce(dev1);
+		if (!sriov_enabled) {
+			mlx5_add_dev_by_protocol(dev0, MLX5_INTERFACE_PROTOCOL_IB);
+			mlx5_nic_vport_enable_roce(dev1);
+		}
 	} else if (do_bond && mlx5_lag_is_bonded(ldev)) {
 		mlx5_modify_lag(ldev, &tracker);
 	} else if (!do_bond && mlx5_lag_is_bonded(ldev)) {
-		mlx5_remove_dev_by_protocol(dev0, MLX5_INTERFACE_PROTOCOL_IB);
-		mlx5_nic_vport_disable_roce(dev1);
+		if (!sriov_enabled) {
+			mlx5_remove_dev_by_protocol(dev0, MLX5_INTERFACE_PROTOCOL_IB);
+			mlx5_nic_vport_disable_roce(dev1);
+		}
 
 		mlx5_deactivate_lag(ldev);
 
-		for (i = 0; i < MLX5_MAX_PORTS; i++)
-			if (ldev->pf[i].dev)
-				mlx5_add_dev_by_protocol(ldev->pf[i].dev,
-							 MLX5_INTERFACE_PROTOCOL_IB);
+		if (!sriov_enabled)
+			for (i = 0; i < MLX5_MAX_PORTS; i++)
+				if (ldev->pf[i].dev)
+					mlx5_add_dev_by_protocol(ldev->pf[i].dev,
+								 MLX5_INTERFACE_PROTOCOL_IB);
 	}
 }