dt-bindings: display/msm: Add SM6350 MDSS

Document the SM6350 MDSS.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/541286/
Link: https://lore.kernel.org/r/20230411-topic-straitlagoon_mdss-v6-4-dee6a882571b@linaro.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml

+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  SM6350 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6350-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6350-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm6350-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm6350-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x800 0x2>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm6350-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AXI_CLK>,
+              <&dispcc DISP_CC_MDSS_AHB_CLK>,
+              <&dispcc DISP_CC_MDSS_ROT_CLK>,
+              <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+              <&dispcc DISP_CC_MDSS_MDP_CLK>,
+              <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "rot", "lut", "core",
+                    "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                              <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                              <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                              <&dispcc DISP_CC_MDSS_AHB_CLK>;
+            assigned-clock-rates = <300000000>,
+                                   <19200000>,
+                                   <19200000>,
+                                   <19200000>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SM6350_CX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM6350_MX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+        };
+    };
+...