Merge tag 'imx-dt64-5.9' of...

Merge tag 'imx-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.9:

- Update i.MX8M OCOTP device node name to match .yaml schema.
- Add ftm_alarm0 device support for layerscape SoCs.
- Add DSPI controller support for lx2160a device.
- A series from Peng Fan to add aliases for various devices on i.MX8
  SoCs.
- Add Hantro G1/G2 VPU device support for imx8mq.
- Add more thermal zone support for ls1028a, ls1043a and ls1046a.
- Other small random changes.

* tag 'imx-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits)
  arm64: dts: lx2160a-rdb: fix shunt-resistor value
  arm64: dts: ls1028a-qds: Add DSPI flash nodes
  arm64: dts: lx2160a: Increase configuration space size
  arm64: dts: zii-ultra: update MDIO speed and preamble
  arm64: dts: ls1043a: update USB nodes status to match board config
  arm64: dts: imx8mn-evk: add pca9450 for i.mx8mn-evk board
  arm64: dts: imx8mp: add ddr pmu device node
  arm64: dts: ls1043a: add more thermal zone support
  arm64: dts: ls1046a: add more thermal zone support
  arm64: dts: layerscape: add ftm_alarm0 node
  arm64: dts: ls1028a: Add ftm_alarm0 DT node
  arm64: dts: lx2160a: add ftm_alarm0 DT node
  arm64: dts: lx2160a: add DT node for all DSPI controller
  arm64: dts: lx2160a: add dspi controller DT nodes
  arm64: dts: imx8mp: Add fallback compatible to ocotp node
  arm64: dts: imx8qxp: Add ethernet alias
  arm64: dts: imx8qxp: add i2c aliases
  arm64: dts: imx8qxp: add alias for lsio MU
  arm64: dts: imx8m: add mu node
  arm64: dts: imx8m: change ocotp node name on i.MX8M SoCs
  ...

Link: https://lore.kernel.org/r/20200720085536.24138-4-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi

@@ -17,6 +17,7 @@ / {
 
 	aliases {
 		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
 		rtic-a = &rtic_a;
 		rtic-b = &rtic_b;
 		rtic-c = &rtic_c;
@@ -512,6 +513,20 @@ pcie: pcie@3400000 {
 					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1012a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 
 	firmware {

arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts

@@ -107,6 +107,91 @@ qds_phy1: ethernet-phy@5 {
 	};
 };
 
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&dspi1 {
+	bus-num = <1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&dspi2 {
+	bus-num = <2>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
 &duart0 {
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -17,6 +17,10 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		rtc1 = &ftm_alarm0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -129,11 +133,31 @@ its: gic-its@6020000 {
 	};
 
 	thermal-zones {
-		core-cluster {
+		ddr-controller {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
 
+			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
 			trips {
 				core_cluster_alert: core-cluster-alert {
 					temperature = <85000>;
@@ -983,6 +1007,19 @@ fixed-link {
 				};
 			};
 		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x1c>;
+			#fsl,rcpm-wakeup-cells = <7>;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls1028a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	malidp0: display@f080000 {

arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts

@@ -148,4 +148,8 @@ qflash0: flash@0 {
 	};
 };
 
+&usb0 {
+	status = "okay";
+};
+
 #include "fsl-ls1043-post.dtsi"

arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts

@@ -209,3 +209,11 @@ ucc_hdlc: ucc@2000 {
 		fsl,tdm-interface;
 	};
 };
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

@@ -27,6 +27,7 @@ aliases {
 		ethernet4 = &enet4;
 		ethernet5 = &enet5;
 		ethernet6 = &enet6;
+		rtc1 = &ftm_alarm0;
 	};
 
 	cpus {
@@ -149,19 +150,79 @@ reboot {
 	};
 
 	thermal-zones {
-		cpu_thermal: cpu-thermal {
+		ddr-controller {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
 
+			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		serdes {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				serdes-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				serdes-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		fman {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				fman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				fman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
 
 			trips {
-				cpu_alert: cpu-alert {
+				core_cluster_alert: core-cluster-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
-				cpu_crit: cpu-crit {
+
+				core_cluster_crit: core-cluster-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -170,7 +231,7 @@ cpu_crit: cpu-crit {
 
 			cooling-maps {
 				map0 {
-					trip = <&cpu_alert>;
+					trip = <&core_cluster_alert>;
 					cooling-device =
 						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -179,6 +240,26 @@ map0 {
 				};
 			};
 		};
+
+		sec {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				sec-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				sec-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	timer {
@@ -677,6 +758,7 @@ usb0: usb3@2f00000 {
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
 		};
 
 		usb1: usb3@3000000 {
@@ -687,6 +769,7 @@ usb1: usb3@3000000 {
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
 		};
 
 		usb2: usb3@3100000 {
@@ -697,6 +780,7 @@ usb2: usb3@3100000 {
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
 		};
 
 		sata: sata@3200000 {
@@ -829,6 +913,19 @@ qdma: dma-controller@8380000 {
 			big-endian;
 		};
 
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1043a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 
 	firmware {

arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi

@@ -28,6 +28,7 @@ aliases {
 		ethernet5 = &enet5;
 		ethernet6 = &enet6;
 		ethernet7 = &enet7;
+		rtc1 = &ftm_alarm0;
 	};
 
 	cpus {
@@ -117,19 +118,79 @@ reboot {
 	};
 
 	thermal-zones {
-		cpu_thermal: cpu-thermal {
+		ddr-controller {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		serdes {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				serdes-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				serdes-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		fman {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				fman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				fman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
 
 			trips {
-				cpu_alert: cpu-alert {
+				core_cluster_alert: core-cluster-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu-crit {
+				core_cluster_crit: core-cluster-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -138,7 +199,7 @@ cpu_crit: cpu-crit {
 
 			cooling-maps {
 				map0 {
-					trip = <&cpu_alert>;
+					trip = <&core_cluster_alert>;
 					cooling-device =
 						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -147,6 +208,26 @@ map0 {
 				};
 			};
 		};
+
+		sec {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				sec-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				sec-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	timer {
@@ -765,6 +846,20 @@ qdma: dma-controller@8380000 {
 			queue-sizes = <64 64>;
 			big-endian;
 		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1046a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 
 	reserved-memory {

arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi

@@ -18,6 +18,7 @@ / {
 
 	aliases {
 		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
 	};
 
 	cpus {
@@ -781,6 +782,19 @@ dpmac10: dpmac@a {
 				};
 			};
 		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x18>;
+			#fsl,rcpm-wakeup-cells = <6>;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls1088a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	firmware {

arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi

@@ -20,6 +20,7 @@ / {
 
 	aliases {
 		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
 		serial0 = &serial0;
 		serial1 = &serial1;
 		serial2 = &serial2;
@@ -763,6 +764,19 @@ ccn@4000000 {
 			reg = <0x0 0x04000000 0x0 0x01000000>;
 			interrupts = <0 12 4>;
 		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x18>;
+			#fsl,rcpm-wakeup-cells = <6>;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls208xa-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	ddr1: memory-controller@1080000 {

arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts

@@ -35,6 +35,42 @@ &crypto {
 	status = "okay";
 };
 
+&dspi0 {
+	status = "okay";
+
+	dflash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi1 {
+	status = "okay";
+
+	dflash1: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi2 {
+	status = "okay";
+
+	dflash2: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
 &esdhc0 {
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts

@@ -121,7 +121,7 @@ i2c@2 {
 			power-monitor@40 {
 				compatible = "ti,ina220";
 				reg = <0x40>;
-				shunt-resistor = <1000>;
+				shunt-resistor = <500>;
 			};
 		};
 

arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi

@@ -2,7 +2,7 @@
 //
 // Device Tree Include file for Layerscape-LX2160A family SoC.
 //
-// Copyright 2018 NXP
+// Copyright 2018-2020 NXP
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -16,6 +16,10 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		rtc1 = &ftm_alarm0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -777,6 +781,45 @@ fspi: spi@20c0000 {
 			status = "disabled";
 		};
 
+		dspi0: spi@2100000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 7>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <0>;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 7>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <1>;
+			status = "disabled";
+		};
+
+		dspi2: spi@2120000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 7>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <2>;
+			status = "disabled";
+		};
+
 		esdhc0: esdhc@2140000 {
 			compatible = "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
@@ -888,6 +931,20 @@ watchdog@23a0000 {
 			timeout-sec = <30>;
 		};
 
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x1c>;
+			#fsl,rcpm-wakeup-cells = <7>;
+			little-endian;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,lx2160a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		usb0: usb@3100000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
@@ -957,7 +1014,7 @@ sata3: sata@3230000 {
 		pcie@3400000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
-			       0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x80 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -985,7 +1042,7 @@ pcie@3400000 {
 		pcie@3500000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
-			       0x88 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x88 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1013,7 +1070,7 @@ pcie@3500000 {
 		pcie@3600000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
-			       0x90 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x90 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1041,7 +1098,7 @@ pcie@3600000 {
 		pcie@3700000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
-			       0x98 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x98 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1069,7 +1126,7 @@ pcie@3700000 {
 		pcie@3800000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03800000 0x0 0x00100000   /* controller registers */
-			       0xa0 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1097,7 +1154,7 @@ pcie@3800000 {
 		pcie@3900000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03900000 0x0 0x00100000   /* controller registers */
-			       0xa8 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -18,10 +18,18 @@ / {
 
 	aliases {
 		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -29,14 +37,6 @@ aliases {
 		spi0 = &ecspi1;
 		spi1 = &ecspi2;
 		spi2 = &ecspi3;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
 	};
 
 	cpus {
@@ -467,7 +467,7 @@ gpr: iomuxc-gpr@30340000 {
 				reg = <0x30340000 0x10000>;
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
+			ocotp: efuse@30350000 {
 				compatible = "fsl,imx8mm-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
@@ -775,6 +775,14 @@ uart4: serial@30a60000 {
 				status = "disabled";
 			};
 
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
 			usdhc1: mmc@30b40000 {
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;

arch/arm64/boot/dts/freescale/imx8mn-evk.dts

@@ -13,6 +13,102 @@ / {
 	compatible = "fsl,imx8mn-evk", "fsl,imx8mn";
 };
 
+&i2c1 {
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450b";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			buck1: BUCK1{
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
 &A53_0 {
 	/delete-property/operating-points-v2;
 };

arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi

@@ -223,6 +223,12 @@ MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
 		>;
 	};
 
+	pinctrl_pmic: pmicirq {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41

arch/arm64/boot/dts/freescale/imx8mn.dtsi

@@ -374,7 +374,7 @@ gpr: iomuxc-gpr@30340000 {
 				reg = <0x30340000 0x10000>;
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
+			ocotp: efuse@30350000 {
 				compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>;
@@ -675,6 +675,14 @@ uart4: serial@30a60000 {
 				status = "disabled";
 			};
 
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
 			usdhc1: mmc@30b40000 {
 				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -23,6 +23,12 @@ aliases {
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
 		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		i2c5 = &i2c6;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
@@ -307,8 +313,8 @@ gpr: iomuxc-gpr@30340000 {
 				reg = <0x30340000 0x10000>;
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
-				compatible = "fsl,imx8mp-ocotp", "syscon";
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mp-ocotp", "fsl,imx8mm-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>;
 				/* For nvmem subnodes */
@@ -621,6 +627,14 @@ uart4: serial@30a60000 {
 				status = "disabled";
 			};
 
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
 			i2c5: i2c@30ad0000 {
 				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;
@@ -730,5 +744,11 @@ gic: interrupt-controller@38800000 {
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
 		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };

arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi

@@ -131,6 +131,8 @@ &fec1 {
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 
 		switch: switch@0 {

arch/arm64/boot/dts/freescale/imx8mq.dtsi

@@ -20,6 +20,7 @@ / {
 	#size-cells = <2>;
 
 	aliases {
+		ethernet0 = &fec1;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -29,6 +30,8 @@ aliases {
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -539,7 +542,7 @@ mux: mux-controller {
 				};
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
+			ocotp: efuse@30350000 {
 				compatible = "fsl,imx8mq-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
@@ -675,6 +678,7 @@ pgc_gpu: power-domain@5 {
 					pgc_vpu: power-domain@6 {
 						#power-domain-cells = <0>;
 						reg = <IMX8M_POWER_DOMAIN_VPU>;
+						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
 					};
 
 					pgc_disp: power-domain@7 {
@@ -959,6 +963,14 @@ uart4: serial@30a60000 {
 				status = "disabled";
 			};
 
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
 			usdhc1: mmc@30b40000 {
 				compatible = "fsl,imx8mq-usdhc",
 				             "fsl,imx7d-usdhc";
@@ -1142,6 +1154,32 @@ usb3_phy1: usb-phy@382f0040 {
 			status = "disabled";
 		};
 
+		vpu: video-codec@38300000 {
+			compatible = "nxp,imx8mq-vpu";
+			reg = <0x38300000 0x10000>,
+			      <0x38310000 0x10000>,
+			      <0x38320000 0x10000>;
+			reg-names = "g1", "g2", "ctrl";
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g1", "g2";
+			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
+				 <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
+			clock-names = "g1", "g2", "bus";
+			assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
+					  <&clk IMX8MQ_CLK_VPU_G2>,
+					  <&clk IMX8MQ_CLK_VPU_BUS>,
+					  <&clk IMX8MQ_VPU_PLL_BYPASS>;
+			assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
+						 <&clk IMX8MQ_VPU_PLL_OUT>,
+						 <&clk IMX8MQ_SYS1_PLL_800M>,
+						 <&clk IMX8MQ_VPU_PLL>;
+			assigned-clock-rates = <600000000>, <600000000>,
+					       <800000000>, <0>;
+			power-domains = <&pgc_vpu>;
+		};
+
 		pcie0: pcie@33800000 {
 			compatible = "fsl,imx8mq-pcie";
 			reg = <0x33800000 0x400000>,

arch/arm64/boot/dts/freescale/imx8qxp.dtsi

@@ -19,6 +19,8 @@ / {
 	#size-cells = <2>;
 
 	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
 		gpio0 = &lsio_gpio0;
 		gpio1 = &lsio_gpio1;
 		gpio2 = &lsio_gpio2;
@@ -27,10 +29,18 @@ aliases {
 		gpio5 = &lsio_gpio5;
 		gpio6 = &lsio_gpio6;
 		gpio7 = &lsio_gpio7;
+		i2c0 = &adma_i2c0;
+		i2c1 = &adma_i2c1;
+		i2c2 = &adma_i2c2;
+		i2c3 = &adma_i2c3;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
+		mu0 = &lsio_mu0;
 		mu1 = &lsio_mu1;
+		mu2 = &lsio_mu2;
+		mu3 = &lsio_mu3;
+		mu4 = &lsio_mu4;
 		serial0 = &adma_lpuart0;
 		serial1 = &adma_lpuart1;
 		serial2 = &adma_lpuart2;