[SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver

HighPoint RocketRAID 3220/3320 series 8 channel PCI-X SATA RAID Host
Adapters.

Fixes from original submission:

Merge Andrew Morton's patches:
- Provide locking for global list
- Fix debug printks
- uninline function with multiple callsites
- coding style fixups
- remove unneeded casts of void*
- kfree(NULL) is legal
- Don't "succeed" if register_chrdev() failed - otherwise we'll later
  unregister a not-registered chrdev.
- Don't return from hptiop_do_ioctl() with the spinlock held.
- uninline __hpt_do_ioctl()

Update for Arjan van de Ven's comments:
- put all asm/ includes after the linux/ ones
- replace mdelay with msleep
- add pci posting flush
- do not set pci command reqister in map_pci_bar
- do not try merging sg elements in hptiop_buildsgl()
- remove unused outstandingcommands member from hba structure
- remove unimplemented hptiop_abort() handler
- remove typedef u32 hpt_id_t

Other updates:
- fix endianess
Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Documentation/scsi/hptiop.txt

+HIGHPOINT ROCKETRAID 3xxx RAID DRIVER (hptiop)
+
+Controller Register Map
+-------------------------
+
+The controller IOP is accessed via PCI BAR0.
+
+     BAR0 offset    Register
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+
+
+I/O Request Workflow
+----------------------
+
+All queued requests are handled via inbound/outbound queue port.
+A request packet can be allocated in either IOP or host memory.
+
+To send a request to the controller:
+
+    - Get a free request packet by reading the inbound queue port or
+      allocate a free request in host DMA coherent memory.
+
+      The value returned from the inbound queue port is an offset
+      relative to the IOP BAR0.
+
+      Requests allocated in host memory must be aligned on 32-bytes boundary.
+
+    - Fill the packet.
+
+    - Post the packet to IOP by writing it to inbound queue. For requests
+      allocated in IOP memory, write the offset to inbound queue port. For
+      requests allocated in host memory, write (0x80000000|(bus_addr>>5))
+      to the inbound queue port.
+
+    - The IOP process the request. When the request is completed, it
+      will be put into outbound queue. An outbound interrupt will be
+      generated.
+
+      For requests allocated in IOP memory, the request offset is posted to
+      outbound queue.
+
+      For requests allocated in host memory, (0x80000000|(bus_addr>>5))
+      is posted to the outbound queue. If IOP_REQUEST_FLAG_OUTPUT_CONTEXT
+      flag is set in the request, the low 32-bit context value will be
+      posted instead.
+
+    - The host read the outbound queue and complete the request.
+
+      For requests allocated in IOP memory, the host driver free the request
+      by writing it to the outbound queue.
+
+Non-queued requests (reset/flush etc) can be sent via inbound message
+register 0. An outbound message with the same value indicates the completion
+of an inbound message.
+
+
+User-level Interface
+---------------------
+
+The driver exposes following sysfs attributes:
+
+     NAME                 R/W    Description
+     driver-version        R     driver version string
+     firmware-version      R     firmware version string
+
+The driver registers char device "hptiop" to communicate with HighPoint RAID
+management software. Its ioctl routine acts as a general binary interface 
+between the IOP firmware and HighPoint RAID management software. New management
+functions can be implemented in application/firmware without modification
+in driver code.
+
+
+-----------------------------------------------------------------------------
+Copyright (C) 2006 HighPoint Technologies, Inc. All Rights Reserved.
+
+  This file is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  linux@highpoint-tech.com
+  http://www.highpoint-tech.com

MAINTAINERS

@@ -1075,6 +1075,12 @@ L:	linux-hams@vger.kernel.org
 W:	http://www.nt.tuwien.ac.at/~kkudielk/Linux/
 S:	Maintained
 
+HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
+P:	HighPoint Linux Team
+M:	linux@highpoint-tech.com
+W:	http://www.highpoint-tech.com
+S:	Supported
+
 HIPPI
 P:	Jes Sorensen
 M:	jes@trained-monkey.org

drivers/scsi/Kconfig

@@ -524,6 +524,16 @@ config SCSI_PDC_ADMA
 
 	  If unsure, say N.
 
+config SCSI_HPTIOP
+	tristate "HighPoint RocketRAID 3xxx Controller support"
+	depends on SCSI && PCI
+	help
+	  This option enables support for HighPoint RocketRAID 3xxx
+	  controllers.
+
+	  To compile this driver as a module, choose M here; the module
+	  will be called hptiop. If unsure, say N.
+
 config SCSI_SATA_QSTOR
 	tristate "Pacific Digital SATA QStor support"
 	depends on SCSI_SATA && PCI

drivers/scsi/Makefile

@@ -138,6 +138,7 @@ obj-$(CONFIG_SCSI_SATA_NV)	+= libata.o sata_nv.o
 obj-$(CONFIG_SCSI_SATA_ULI)	+= libata.o sata_uli.o
 obj-$(CONFIG_SCSI_SATA_MV)	+= libata.o sata_mv.o
 obj-$(CONFIG_SCSI_PDC_ADMA)	+= libata.o pdc_adma.o
+obj-$(CONFIG_SCSI_HPTIOP)	+= hptiop.o
 
 obj-$(CONFIG_ARM)		+= arm/