Commit 3bdee6a8 authored by Wenpeng Liang's avatar Wenpeng Liang Committed by David S. Miller

net: phy: fix space alignment issues

There are some space related issues, including spaces at the start of the
line, before tabs, after open parenthesis and before close parenthesis.
Signed-off-by: default avatarWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: default avatarWeihang Li <liweihang@huawei.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e1f82127
......@@ -43,10 +43,10 @@
#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
#define MII_DM9161_INTR_SPD_CHANGE 0x0008
#define MII_DM9161_INTR_LINK_CHANGE 0x0004
#define MII_DM9161_INTR_INIT 0x0000
#define MII_DM9161_INTR_INIT 0x0000
#define MII_DM9161_INTR_STOP \
(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
| MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK | \
MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
#define MII_DM9161_INTR_CHANGE \
(MII_DM9161_INTR_DPLX_CHANGE | \
MII_DM9161_INTR_SPD_CHANGE | \
......
......@@ -629,14 +629,14 @@ static void sfp_upstream_clear(struct sfp_bus *bus)
* be put via sfp_bus_put() when done.
*
* Returns:
* - on success, a pointer to the sfp_bus structure,
* - %NULL if no SFP is specified,
* - on failure, an error pointer value:
* - on success, a pointer to the sfp_bus structure,
* - %NULL if no SFP is specified,
* - on failure, an error pointer value:
*
* - corresponding to the errors detailed for
* fwnode_property_get_reference_args().
* - %-ENOMEM if we failed to allocate the bus.
* - an error from the upstream's connect_phy() method.
* - corresponding to the errors detailed for
* fwnode_property_get_reference_args().
* - %-ENOMEM if we failed to allocate the bus.
* - an error from the upstream's connect_phy() method.
*/
struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
{
......@@ -671,14 +671,14 @@ EXPORT_SYMBOL_GPL(sfp_bus_find_fwnode);
* bus, so it is safe to put the bus after this call.
*
* Returns:
* - on success, a pointer to the sfp_bus structure,
* - %NULL if no SFP is specified,
* - on failure, an error pointer value:
* - on success, a pointer to the sfp_bus structure,
* - %NULL if no SFP is specified,
* - on failure, an error pointer value:
*
* - corresponding to the errors detailed for
* fwnode_property_get_reference_args().
* - %-ENOMEM if we failed to allocate the bus.
* - an error from the upstream's connect_phy() method.
* - corresponding to the errors detailed for
* fwnode_property_get_reference_args().
* - %-ENOMEM if we failed to allocate the bus.
* - an error from the upstream's connect_phy() method.
*/
int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
const struct sfp_upstream_ops *ops)
......
......@@ -160,11 +160,11 @@ static const struct spi_device_id ks8995_id[] = {
MODULE_DEVICE_TABLE(spi, ks8995_id);
static const struct of_device_id ks8895_spi_of_match[] = {
{ .compatible = "micrel,ks8995" },
{ .compatible = "micrel,ksz8864" },
{ .compatible = "micrel,ksz8795" },
{ },
};
{ .compatible = "micrel,ks8995" },
{ .compatible = "micrel,ksz8864" },
{ .compatible = "micrel,ksz8795" },
{ },
};
MODULE_DEVICE_TABLE(of, ks8895_spi_of_match);
static inline u8 get_chip_id(u8 val)
......
......@@ -20,12 +20,12 @@
#include <linux/mii.h>
#include <linux/phy.h>
#define MII_XCIIS 0x11 /* Configuration Info IRQ & Status Reg */
#define MII_XIE 0x12 /* Interrupt Enable Register */
#define MII_XCIIS 0x11 /* Configuration Info IRQ & Status Reg */
#define MII_XIE 0x12 /* Interrupt Enable Register */
#define MII_XIE_DEFAULT_MASK 0x0070 /* ANE complete, Remote Fault, Link Down */
#define STE101P_PHY_ID 0x00061c50
#define STE100P_PHY_ID 0x1c040011
#define STE100P_PHY_ID 0x1c040011
static int ste10Xp_config_init(struct phy_device *phydev)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment