Skip to content

L
linux
Commit 3bf7ec62 authored by Kever Yang's avatar Kever Yang Committed by Heiko Stuebner
Browse files
Options

ARM: dts: rockchip: remove rk3288 fennec board support 

Since there is no one using this board, remove it.
Signed-off-by: default avatarKever Yang <kever.yang@rock-chips.com>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent dd7c66ac
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 348 deletions
arch/arm/boot/dts/Makefile
View file @ 3bf7ec62
......@@ -908,7 +908,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3229-xms6.dtb \
rk3288-evb-act8846.dtb \
rk3288-evb-rk808.dtb \
rk3288-fennec.dtb \
rk3288-firefly-beta.dtb \
rk3288-firefly.dtb \
rk3288-firefly-reload.dtb \
......
arch/arm/boot/dts/rk3288-fennec.dts deleted 100644 → 0
View file @ dd7c66ac
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include "rk3288.dtsi"
/ {
model = "Rockchip RK3288 Fennec Board";
compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
memory@0 {
reg = <0x0 0x0 0x0 0x80000000>;
device_type = "memory";
};
ext_gmac: external-gmac-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
clock-output-names = "ext_gmac";
};
vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
};
&cpu0 {
cpu0-supply = <&vdd_cpu>;
};
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
status = "okay";
};
&gmac {
assigned-clocks = <&cru SCLK_MAC>;
assigned-clock-parents = <&ext_gmac>;
clock_in_out = "input";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
status = "okay";
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller;
wakeup-source;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc6-supply = <&vcc_sys>;
vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc_io>;
vcc9-supply = <&vcc_io>;
vcc10-supply = <&vcc_io>;
vcc11-supply = <&vcc_io>;
vcc12-supply = <&vcc_io>;
vddio-supply = <&vcc_io>;
regulators {
vdd_cpu: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-name = "vdd_arm";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd_gpu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_io: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_io";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vccio_pmu: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca_33: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcca_33";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_10: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd_10";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc_wl: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_wl";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vccio_sd: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vdd10_lcd: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd10_lcd";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc_18: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_18";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc18_lcd: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18_lcd";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_sd: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_sd";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_lan: SWITCH_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_lan";
regulator-state-mem {
regulator-on-in-suspend;
};
};
};
};
};
&pinctrl {
pcfg_output_high: pcfg-output-high {
output-high;
};
pcfg_output_low: pcfg-output-low {
output-low;
};
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
drive-strength = <8>;
};
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
bias-pull-up;
drive-strength = <8>;
};
gmac {
phy_int: phy-int {
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_pmeb: phy-pmeb {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_rst: phy-rst {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
};
};
pmic {
pmic_int: pmic-int {
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usbphy {
host_drv: host-drv {
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&uart2 {
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&host_drv>;
vbus_drv-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host1 {
status = "okay";
};
&usb_otg {
status = "okay";
};
&usb_hsic {
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7