Commit 3bfd5c5b authored by Heiko Stübner's avatar Heiko Stübner Committed by Dmitry Torokhov

Input: add generic GPIO-tilt driver

There exist tilt switches that simply report their tilt-state via
some gpios. The number and orientation of their axes can vary
depending on the switch used and the build of the device. Also two
or more one-axis switches could be combined to provide multi-dimensional
orientation.

One example of a device using such a switch is the family of Qisda
ebook readers, where the switch provides information about the
landscape / portrait orientation of the device. The example in
Documentation/input/gpio-tilt.txt documents exactly this one-axis
device.
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent a6c61789
Driver for tilt-switches connected via GPIOs
============================================
Generic driver to read data from tilt switches connected via gpios.
Orientation can be provided by one or more than one tilt switches,
i.e. each tilt switch providing one axis, and the number of axes
is also not limited.
Data structures:
----------------
The array of struct gpio in the gpios field is used to list the gpios
that represent the current tilt state.
The array of struct gpio_tilt_axis describes the axes that are reported
to the input system. The values set therein are used for the
input_set_abs_params calls needed to init the axes.
The array of struct gpio_tilt_state maps gpio states to the corresponding
values to report. The gpio state is represented as a bitfield where the
bit-index corresponds to the index of the gpio in the struct gpio array.
In the same manner the values stored in the axes array correspond to
the elements of the gpio_tilt_axis-array.
Example:
--------
Example configuration for a single TS1003 tilt switch that rotates around
one axis in 4 steps and emitts the current tilt via two GPIOs.
static int sg060_tilt_enable(struct device *dev) {
/* code to enable the sensors */
};
static void sg060_tilt_disable(struct device *dev) {
/* code to disable the sensors */
};
static struct gpio sg060_tilt_gpios[] = {
{ SG060_TILT_GPIO_SENSOR1, GPIOF_IN, "tilt_sensor1" },
{ SG060_TILT_GPIO_SENSOR2, GPIOF_IN, "tilt_sensor2" },
};
static struct gpio_tilt_state sg060_tilt_states[] = {
{
.gpios = (0 << 1) | (0 << 0),
.axes = (int[]) {
0,
},
}, {
.gpios = (0 << 1) | (1 << 0),
.axes = (int[]) {
1, /* 90 degrees */
},
}, {
.gpios = (1 << 1) | (1 << 0),
.axes = (int[]) {
2, /* 180 degrees */
},
}, {
.gpios = (1 << 1) | (0 << 0),
.axes = (int[]) {
3, /* 270 degrees */
},
},
};
static struct gpio_tilt_axis sg060_tilt_axes[] = {
{
.axis = ABS_RY,
.min = 0,
.max = 3,
.fuzz = 0,
.flat = 0,
},
};
static struct gpio_tilt_platform_data sg060_tilt_pdata= {
.gpios = sg060_tilt_gpios,
.nr_gpios = ARRAY_SIZE(sg060_tilt_gpios),
.axes = sg060_tilt_axes,
.nr_axes = ARRAY_SIZE(sg060_tilt_axes),
.states = sg060_tilt_states,
.nr_states = ARRAY_SIZE(sg060_tilt_states),
.debounce_interval = 100,
.poll_interval = 1000,
.enable = sg060_tilt_enable,
.disable = sg060_tilt_disable,
};
static struct platform_device sg060_device_tilt = {
.name = "gpio-tilt-polled",
.id = -1,
.dev = {
.platform_data = &sg060_tilt_pdata,
},
};
...@@ -179,6 +179,20 @@ config INPUT_APANEL ...@@ -179,6 +179,20 @@ config INPUT_APANEL
To compile this driver as a module, choose M here: the module will To compile this driver as a module, choose M here: the module will
be called apanel. be called apanel.
config INPUT_GPIO_TILT_POLLED
tristate "Polled GPIO tilt switch"
depends on GENERIC_GPIO
select INPUT_POLLDEV
help
This driver implements support for tilt switches connected
to GPIO pins that are not capable of generating interrupts.
The list of gpios to use and the mapping of their states
to specific angles is done via platform data.
To compile this driver as a module, choose M here: the
module will be called gpio_tilt_polled.
config INPUT_IXP4XX_BEEPER config INPUT_IXP4XX_BEEPER
tristate "IXP4XX Beeper support" tristate "IXP4XX Beeper support"
depends on ARCH_IXP4XX depends on ARCH_IXP4XX
......
...@@ -23,6 +23,7 @@ obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o ...@@ -23,6 +23,7 @@ obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o
obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
......
/*
* Driver for tilt switches connected via GPIO lines
* not capable of generating interrupts
*
* Copyright (C) 2011 Heiko Stuebner <heiko@sntech.de>
*
* based on: drivers/input/keyboard/gpio_keys_polled.c
*
* Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input-polldev.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/input/gpio_tilt.h>
#define DRV_NAME "gpio-tilt-polled"
struct gpio_tilt_polled_dev {
struct input_polled_dev *poll_dev;
struct device *dev;
const struct gpio_tilt_platform_data *pdata;
int last_state;
int threshold;
int count;
};
static void gpio_tilt_polled_poll(struct input_polled_dev *dev)
{
struct gpio_tilt_polled_dev *tdev = dev->private;
const struct gpio_tilt_platform_data *pdata = tdev->pdata;
struct input_dev *input = dev->input;
struct gpio_tilt_state *tilt_state = NULL;
int state, i;
if (tdev->count < tdev->threshold) {
tdev->count++;
} else {
state = 0;
for (i = 0; i < pdata->nr_gpios; i++)
state |= (!!gpio_get_value(pdata->gpios[i].gpio) << i);
if (state != tdev->last_state) {
for (i = 0; i < pdata->nr_states; i++)
if (pdata->states[i].gpios == state)
tilt_state = &pdata->states[i];
if (tilt_state) {
for (i = 0; i < pdata->nr_axes; i++)
input_report_abs(input,
pdata->axes[i].axis,
tilt_state->axes[i]);
input_sync(input);
}
tdev->count = 0;
tdev->last_state = state;
}
}
}
static void gpio_tilt_polled_open(struct input_polled_dev *dev)
{
struct gpio_tilt_polled_dev *tdev = dev->private;
const struct gpio_tilt_platform_data *pdata = tdev->pdata;
if (pdata->enable)
pdata->enable(tdev->dev);
/* report initial state of the axes */
tdev->last_state = -1;
tdev->count = tdev->threshold;
gpio_tilt_polled_poll(tdev->poll_dev);
}
static void gpio_tilt_polled_close(struct input_polled_dev *dev)
{
struct gpio_tilt_polled_dev *tdev = dev->private;
const struct gpio_tilt_platform_data *pdata = tdev->pdata;
if (pdata->disable)
pdata->disable(tdev->dev);
}
static int __devinit gpio_tilt_polled_probe(struct platform_device *pdev)
{
const struct gpio_tilt_platform_data *pdata = pdev->dev.platform_data;
struct device *dev = &pdev->dev;
struct gpio_tilt_polled_dev *tdev;
struct input_polled_dev *poll_dev;
struct input_dev *input;
int error, i;
if (!pdata || !pdata->poll_interval)
return -EINVAL;
tdev = kzalloc(sizeof(struct gpio_tilt_polled_dev), GFP_KERNEL);
if (!tdev) {
dev_err(dev, "no memory for private data\n");
return -ENOMEM;
}
error = gpio_request_array(pdata->gpios, pdata->nr_gpios);
if (error) {
dev_err(dev,
"Could not request tilt GPIOs: %d\n", error);
goto err_free_tdev;
}
poll_dev = input_allocate_polled_device();
if (!poll_dev) {
dev_err(dev, "no memory for polled device\n");
error = -ENOMEM;
goto err_free_gpios;
}
poll_dev->private = tdev;
poll_dev->poll = gpio_tilt_polled_poll;
poll_dev->poll_interval = pdata->poll_interval;
poll_dev->open = gpio_tilt_polled_open;
poll_dev->close = gpio_tilt_polled_close;
input = poll_dev->input;
input->name = pdev->name;
input->phys = DRV_NAME"/input0";
input->dev.parent = &pdev->dev;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
__set_bit(EV_ABS, input->evbit);
for (i = 0; i < pdata->nr_axes; i++)
input_set_abs_params(input, pdata->axes[i].axis,
pdata->axes[i].min, pdata->axes[i].max,
pdata->axes[i].fuzz, pdata->axes[i].flat);
tdev->threshold = DIV_ROUND_UP(pdata->debounce_interval,
pdata->poll_interval);
tdev->poll_dev = poll_dev;
tdev->dev = dev;
tdev->pdata = pdata;
error = input_register_polled_device(poll_dev);
if (error) {
dev_err(dev, "unable to register polled device, err=%d\n",
error);
goto err_free_polldev;
}
platform_set_drvdata(pdev, tdev);
return 0;
err_free_polldev:
input_free_polled_device(poll_dev);
err_free_gpios:
gpio_free_array(pdata->gpios, pdata->nr_gpios);
err_free_tdev:
kfree(tdev);
return error;
}
static int __devexit gpio_tilt_polled_remove(struct platform_device *pdev)
{
struct gpio_tilt_polled_dev *tdev = platform_get_drvdata(pdev);
const struct gpio_tilt_platform_data *pdata = tdev->pdata;
platform_set_drvdata(pdev, NULL);
input_unregister_polled_device(tdev->poll_dev);
input_free_polled_device(tdev->poll_dev);
gpio_free_array(pdata->gpios, pdata->nr_gpios);
kfree(tdev);
return 0;
}
static struct platform_driver gpio_tilt_polled_driver = {
.probe = gpio_tilt_polled_probe,
.remove = __devexit_p(gpio_tilt_polled_remove),
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
},
};
module_platform_driver(gpio_tilt_polled_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
MODULE_DESCRIPTION("Polled GPIO tilt driver");
MODULE_ALIAS("platform:" DRV_NAME);
#ifndef _INPUT_GPIO_TILT_H
#define _INPUT_GPIO_TILT_H
/**
* struct gpio_tilt_axis - Axis used by the tilt switch
* @axis: Constant describing the axis, e.g. ABS_X
* @min: minimum value for abs_param
* @max: maximum value for abs_param
* @fuzz: fuzz value for abs_param
* @flat: flat value for abs_param
*/
struct gpio_tilt_axis {
int axis;
int min;
int max;
int fuzz;
int flat;
};
/**
* struct gpio_tilt_state - state description
* @gpios: bitfield of gpio target-states for the value
* @axes: array containing the axes settings for the gpio state
* The array indizes must correspond to the axes defined
* in platform_data
*
* This structure describes a supported axis settings
* and the necessary gpio-state which represent it.
*
* The n-th bit in the bitfield describes the state of the n-th GPIO
* from the gpios-array defined in gpio_regulator_config below.
*/
struct gpio_tilt_state {
int gpios;
int *axes;
};
/**
* struct gpio_tilt_platform_data
* @gpios: Array containing the gpios determining the tilt state
* @nr_gpios: Number of gpios
* @axes: Array of gpio_tilt_axis descriptions
* @nr_axes: Number of axes
* @states: Array of gpio_tilt_state entries describing
* the gpio state for specific tilts
* @nr_states: Number of states available
* @debounce_interval: debounce ticks interval in msecs
* @poll_interval: polling interval in msecs - for polling driver only
* @enable: callback to enable the tilt switch
* @disable: callback to disable the tilt switch
*
* This structure contains gpio-tilt-switch configuration
* information that must be passed by platform code to the
* gpio-tilt input driver.
*/
struct gpio_tilt_platform_data {
struct gpio *gpios;
int nr_gpios;
struct gpio_tilt_axis *axes;
int nr_axes;
struct gpio_tilt_state *states;
int nr_states;
int debounce_interval;
unsigned int poll_interval;
int (*enable)(struct device *dev);
void (*disable)(struct device *dev);
};
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment